mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
448 lines
16 KiB
C
448 lines
16 KiB
C
/*
|
|
* Copyright (C) 2004 Arabella Software Ltd.
|
|
* Yuli Barcohen <yuli@arabellasw.com>
|
|
*
|
|
* Support for Interphase iSPAN Communications Controllers
|
|
* (453x and others). Tested on 4532.
|
|
*
|
|
* Derived from iSPAN 4539 port (iphase4539) by
|
|
* Wolfgang Grandegger <wg@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc8260.h>
|
|
#include <asm/io.h>
|
|
|
|
/*
|
|
* I/O Ports configuration table
|
|
*
|
|
* If conf is 1, then that port pin will be configured at boot time
|
|
* according to the five values podr/pdir/ppar/psor/pdat for that entry
|
|
*/
|
|
|
|
#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
|
|
#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
|
|
#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3)
|
|
|
|
const iop_conf_t iop_conf_tab[4][32] = {
|
|
/* Port A */
|
|
{ /* conf ppar psor pdir podr pdat */
|
|
/* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */
|
|
/* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */
|
|
/* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */
|
|
/* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */
|
|
/* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */
|
|
/* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */
|
|
/* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */
|
|
/* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */
|
|
/* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */
|
|
/* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
|
|
/* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */
|
|
/* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */
|
|
/* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */
|
|
/* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */
|
|
/* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */
|
|
/* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */
|
|
/* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */
|
|
/* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */
|
|
/* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */
|
|
/* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */
|
|
/* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */
|
|
/* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */
|
|
/* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 SMTXD */
|
|
/* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 SMRXD */
|
|
/* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */
|
|
/* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */
|
|
/* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */
|
|
/* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */
|
|
/* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */
|
|
/* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */
|
|
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
|
|
/* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */
|
|
},
|
|
|
|
/* Port B */
|
|
{ /* conf ppar psor pdir podr pdat */
|
|
/* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
|
|
/* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
|
|
/* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
|
|
/* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
|
|
/* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
|
|
/* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
|
|
/* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
|
|
/* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
|
|
/* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
|
|
/* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
|
|
/* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
|
|
/* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
|
|
/* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
|
|
/* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
|
|
/* PB17 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */
|
|
/* PB16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */
|
|
/* PB15 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */
|
|
/* PB14 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */
|
|
/* PB13 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */
|
|
/* PB12 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */
|
|
/* PB11 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */
|
|
/* PB10 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */
|
|
/* PB9 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */
|
|
/* PB8 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */
|
|
/* PB7 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */
|
|
/* PB6 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */
|
|
/* PB5 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */
|
|
/* PB4 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */
|
|
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
|
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
|
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
|
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
|
},
|
|
|
|
/* Port C */
|
|
{ /* conf ppar psor pdir podr pdat */
|
|
/* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
|
|
/* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
|
|
/* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */
|
|
/* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
|
|
/* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
|
|
/* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
|
|
/* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
|
|
/* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
|
|
/* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
|
|
/* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
|
|
/* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */
|
|
/* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */
|
|
/* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */
|
|
/* PC18 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII Rx Clock (CLK14) */
|
|
/* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
|
|
/* PC16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII Tx Clock (CLK16) */
|
|
/* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */
|
|
/* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */
|
|
/* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */
|
|
/* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */
|
|
/* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */
|
|
/* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */
|
|
/* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */
|
|
/* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */
|
|
/* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
|
|
/* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
|
|
/* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
|
|
/* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
|
|
/* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
|
|
/* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
|
|
/* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
|
|
/* PC0 */ { 0, 0, 0, 0, 0, 0 } /* PC0 */
|
|
},
|
|
|
|
/* Port D */
|
|
{ /* conf ppar psor pdir podr pdat */
|
|
/* PD31 */ { 0, 0, 0, 0, 0, 0 }, /* PD31 */
|
|
/* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */
|
|
/* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */
|
|
/* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */
|
|
/* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */
|
|
/* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */
|
|
/* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */
|
|
/* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */
|
|
/* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */
|
|
/* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */
|
|
/* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */
|
|
/* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */
|
|
/* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
|
|
/* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPICLK */
|
|
/* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPIMOSI */
|
|
/* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPIMISO */
|
|
/* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
|
|
/* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */
|
|
/* PD13 */ { 1, 0, 0, 0, 0, 0 }, /* MII MDIO */
|
|
/* PD12 */ { 1, 0, 0, 1, 0, 0 }, /* MII MDC */
|
|
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
|
|
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
|
|
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 SMTXD */
|
|
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 SMRXD */
|
|
/* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */
|
|
/* PD6 */ { CONFIG_SYS_FCC3, 0, 0, 1, 0, 1 }, /* MII PHY Reset */
|
|
/* PD5 */ { CONFIG_SYS_FCC3, 0, 0, 1, 0, 0 }, /* MII PHY Enable */
|
|
/* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */
|
|
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
|
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
|
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
|
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
|
}
|
|
};
|
|
|
|
#define PSPAN_ADDR 0xF0020000
|
|
#define EEPROM_REG 0x408
|
|
#define EEPROM_READ_CMD 0xA000
|
|
#define PSPAN_WRITE(a,v) \
|
|
*((volatile unsigned long *)(PSPAN_ADDR+(a))) = v; eieio()
|
|
#define PSPAN_READ(a) \
|
|
*((volatile unsigned long *)(PSPAN_ADDR+(a)))
|
|
|
|
static int seeprom_read (int addr, uchar * data, int size)
|
|
{
|
|
ulong val, cmd;
|
|
int i;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
|
|
cmd = EEPROM_READ_CMD;
|
|
cmd |= ((addr + i) << 24) & 0xff000000;
|
|
|
|
/* Wait for ACT to authorize write */
|
|
while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
|
|
eieio ();
|
|
|
|
/* Write command */
|
|
PSPAN_WRITE (EEPROM_REG, cmd);
|
|
|
|
/* Wait for data to be valid */
|
|
while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
|
|
eieio ();
|
|
/* Do it twice, first read might be erratic */
|
|
while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
|
|
eieio ();
|
|
|
|
/* Read error */
|
|
if (val & 0x00000040) {
|
|
return -1;
|
|
} else {
|
|
data[i] = (val >> 16) & 0xff;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/***************************************************************
|
|
* We take some basic Hardware Configuration Parameter from the
|
|
* Serial EEPROM conected to the PSpan bridge. We keep it as
|
|
* simple as possible.
|
|
*/
|
|
#ifdef DEBUG
|
|
static int hwc_flash_size (void)
|
|
{
|
|
uchar byte;
|
|
|
|
if (!seeprom_read (0x40, &byte, sizeof (byte))) {
|
|
switch ((byte >> 2) & 0x3) {
|
|
case 0x1:
|
|
return 0x0400000;
|
|
break;
|
|
case 0x2:
|
|
return 0x0800000;
|
|
break;
|
|
case 0x3:
|
|
return 0x1000000;
|
|
default:
|
|
return 0x0100000;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int hwc_local_sdram_size (void)
|
|
{
|
|
uchar byte;
|
|
|
|
if (!seeprom_read (0x40, &byte, sizeof (byte))) {
|
|
switch ((byte & 0x03)) {
|
|
case 0x1:
|
|
return 0x0800000;
|
|
case 0x2:
|
|
return 0x1000000;
|
|
default:
|
|
return 0; /* not present */
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
static int hwc_main_sdram_size (void)
|
|
{
|
|
uchar byte;
|
|
|
|
if (!seeprom_read (0x41, &byte, sizeof (byte))) {
|
|
return 0x1000000 << ((byte >> 5) & 0x7);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int hwc_serial_number (void)
|
|
{
|
|
int sn = -1;
|
|
|
|
if (!seeprom_read (0xa0, (uchar *) &sn, sizeof (sn))) {
|
|
sn = cpu_to_le32 (sn);
|
|
}
|
|
return sn;
|
|
}
|
|
|
|
static int hwc_mac_address (char *str)
|
|
{
|
|
char mac[6];
|
|
|
|
if (!seeprom_read (0xb0, (uchar *)mac, sizeof (mac))) {
|
|
sprintf (str, "%02X:%02X:%02X:%02X:%02X:%02X",
|
|
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
|
} else {
|
|
strcpy (str, "ERROR");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int hwc_manufact_date (char *str)
|
|
{
|
|
uchar byte;
|
|
int value;
|
|
|
|
if (seeprom_read (0x92, &byte, sizeof (byte)))
|
|
goto out;
|
|
value = byte;
|
|
if (seeprom_read (0x93, &byte, sizeof (byte)))
|
|
goto out;
|
|
value += byte << 8;
|
|
sprintf (str, "%02d/%02d/%04d",
|
|
value & 0x1F, (value >> 5) & 0xF,
|
|
1980 + ((value >> 9) & 0x1FF));
|
|
return 0;
|
|
|
|
out:
|
|
strcpy (str, "ERROR");
|
|
return -1;
|
|
}
|
|
|
|
static int hwc_board_type (char **str)
|
|
{
|
|
ushort id = 0;
|
|
|
|
if (seeprom_read (7, (uchar *) & id, sizeof (id)) == 0) {
|
|
switch (id) {
|
|
case 0x9080:
|
|
*str = "4532-002";
|
|
break;
|
|
case 0x9081:
|
|
*str = "4532-001";
|
|
break;
|
|
case 0x9082:
|
|
*str = "4532-000";
|
|
break;
|
|
default:
|
|
*str = "Unknown";
|
|
}
|
|
} else {
|
|
*str = "Unknown";
|
|
}
|
|
|
|
return id;
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
long maxsize = hwc_main_sdram_size();
|
|
|
|
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_USE_FIRMWARE)
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8260_t *memctl = &immap->im_memctl;
|
|
volatile uchar *base;
|
|
int i;
|
|
|
|
immap->im_siu_conf.sc_ppc_acr = 0x00000026;
|
|
immap->im_siu_conf.sc_ppc_alrh = 0x01276345;
|
|
immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF;
|
|
immap->im_siu_conf.sc_lcl_acr = 0x00000000;
|
|
immap->im_siu_conf.sc_lcl_alrh = 0x01234567;
|
|
immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF;
|
|
immap->im_siu_conf.sc_tescr1 = 0x00004000;
|
|
immap->im_siu_conf.sc_ltescr1 = 0x00004000;
|
|
|
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
|
|
|
|
/* Initialise 60x bus SDRAM */
|
|
base = (uchar *)(CONFIG_SYS_SDRAM_BASE | 0x110);
|
|
memctl->memc_psrt = CONFIG_SYS_PSRT;
|
|
memctl->memc_or1 = CONFIG_SYS_60x_OR;
|
|
memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | CONFIG_SYS_60x_BR;
|
|
|
|
memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x28000000;
|
|
*base = 0xFF;
|
|
memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x08000000;
|
|
for (i = 0; i < 8; i++)
|
|
*base = 0xFF;
|
|
memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x18000000;
|
|
*base = 0xFF;
|
|
memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x40000000;
|
|
|
|
/* Initialise local bus SDRAM */
|
|
base = (uchar *)CONFIG_SYS_LSDRAM_BASE;
|
|
memctl->memc_lsrt = CONFIG_SYS_LSRT;
|
|
memctl->memc_or2 = CONFIG_SYS_LOC_OR;
|
|
memctl->memc_br2 = CONFIG_SYS_LSDRAM_BASE | CONFIG_SYS_LOC_BR;
|
|
|
|
memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000;
|
|
*base = 0xFF;
|
|
memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000;
|
|
for (i = 0; i < 8; i++)
|
|
*base = 0xFF;
|
|
memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000;
|
|
*base = 0xFF;
|
|
memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000;
|
|
|
|
/* We must be able to test a location outsize the maximum legal size
|
|
* to find out THAT we are outside; but this address still has to be
|
|
* mapped by the controller. That means, that the initial mapping has
|
|
* to be (at least) twice as large as the maximum expected size.
|
|
*/
|
|
maxsize = (~(memctl->memc_or1 & BRx_BA_MSK) + 1) / 2;
|
|
|
|
maxsize = get_ram_size((long *)(memctl->memc_br1 & BRx_BA_MSK), maxsize);
|
|
|
|
memctl->memc_or1 |= ~(maxsize - 1);
|
|
|
|
if (maxsize != hwc_main_sdram_size())
|
|
puts("Oops: memory test has not found all memory!\n");
|
|
#endif /* !CONFIG_SYS_RAMBOOT && !CONFIG_SYS_USE_FIRMWARE */
|
|
|
|
/* Return total RAM size (size of 60x SDRAM) */
|
|
return maxsize;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char string[32], *id;
|
|
|
|
hwc_manufact_date(string);
|
|
hwc_board_type(&id);
|
|
printf("Board: Interphase iSPAN %s (#%d %s)\n",
|
|
id, hwc_serial_number(), string);
|
|
#ifdef DEBUG
|
|
printf("Manufacturing date: %s\n", string);
|
|
printf("Serial number : %d\n", hwc_serial_number());
|
|
printf("FLASH size : %d MB\n", hwc_flash_size() >> 20);
|
|
printf("Main SDRAM size : %d MB\n", hwc_main_sdram_size() >> 20);
|
|
printf("Local SDRAM size : %d MB\n", hwc_local_sdram_size() >> 20);
|
|
hwc_mac_address(string);
|
|
printf("MAC address : %s\n", string);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
char *s, str[32];
|
|
int num;
|
|
|
|
if ((s = getenv("serial#")) == NULL &&
|
|
(num = hwc_serial_number()) != -1) {
|
|
sprintf(str, "%06d", num);
|
|
setenv("serial#", str);
|
|
}
|
|
if ((s = getenv("ethaddr")) == NULL && hwc_mac_address(str) == 0) {
|
|
setenv("ethaddr", str);
|
|
}
|
|
|
|
return 0;
|
|
}
|