mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
a94a4071d4
Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
278 lines
6.2 KiB
C
278 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* board.c
|
|
*
|
|
* Board functions for Bosch Guardian
|
|
*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
|
|
* Copyright (C) 2018 Robert Bosch Power Tools GmbH
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <env_internal.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include <led.h>
|
|
#include <panel.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/global_data.h>
|
|
#include <power/tps65217.h>
|
|
#include <spl.h>
|
|
#include <watchdog.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/mem-guardian.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <jffs2/load_kernel.h>
|
|
#include <mtd.h>
|
|
#include <nand.h>
|
|
#include <video.h>
|
|
#include <video_console.h>
|
|
#include "board.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
|
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
static const struct ddr_data ddr3_data = {
|
|
.datardsratio0 = MT41K128M16JT125K_RD_DQS,
|
|
.datawdsratio0 = MT41K128M16JT125K_WR_DQS,
|
|
.datafwsratio0 = MT41K128M16JT125K_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT41K128M16JT125K_PHY_WR_DATA,
|
|
};
|
|
|
|
static const struct cmd_control ddr3_cmd_ctrl_data = {
|
|
.cmd0csratio = MT41K128M16JT125K_RATIO,
|
|
.cmd0iclkout = MT41K128M16JT125K_INVERT_CLKOUT,
|
|
|
|
.cmd1csratio = MT41K128M16JT125K_RATIO,
|
|
.cmd1iclkout = MT41K128M16JT125K_INVERT_CLKOUT,
|
|
|
|
.cmd2csratio = MT41K128M16JT125K_RATIO,
|
|
.cmd2iclkout = MT41K128M16JT125K_INVERT_CLKOUT,
|
|
};
|
|
|
|
static struct emif_regs ddr3_emif_reg_data = {
|
|
.sdram_config = MT41K128M16JT125K_EMIF_SDCFG,
|
|
.ref_ctrl = MT41K128M16JT125K_EMIF_SDREF,
|
|
.sdram_tim1 = MT41K128M16JT125K_EMIF_TIM1,
|
|
.sdram_tim2 = MT41K128M16JT125K_EMIF_TIM2,
|
|
.sdram_tim3 = MT41K128M16JT125K_EMIF_TIM3,
|
|
.zq_config = MT41K128M16JT125K_ZQ_CFG,
|
|
.emif_ddr_phy_ctlr_1 = MT41K128M16JT125K_EMIF_READ_LATENCY,
|
|
};
|
|
|
|
#define OSC (V_OSCK / 1000000)
|
|
const struct dpll_params dpll_ddr = {
|
|
400, OSC - 1, 1, -1, -1, -1, -1};
|
|
|
|
void am33xx_spl_board_init(void)
|
|
{
|
|
int mpu_vdd;
|
|
int usb_cur_lim;
|
|
|
|
/* Get the frequency */
|
|
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
|
|
|
|
/* Initialize for Power Management */
|
|
if (power_tps65217_init(0))
|
|
return;
|
|
|
|
/*
|
|
* Increase USB current limit to 1300mA or 1800mA and set
|
|
* the MPU voltage controller as needed.
|
|
*/
|
|
if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
|
|
usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
|
|
} else {
|
|
usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
|
|
}
|
|
|
|
if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
|
|
TPS65217_POWER_PATH,
|
|
usb_cur_lim,
|
|
TPS65217_USB_INPUT_CUR_LIMIT_MASK))
|
|
puts("tps65217_reg_write failure\n");
|
|
|
|
/* Set DCDC3 (CORE) voltage to 1.125V */
|
|
if (tps65217_voltage_update(TPS65217_DEFDCDC3,
|
|
TPS65217_DCDC_VOLT_SEL_1125MV)) {
|
|
puts("tps65217_voltage_update failure\n");
|
|
return;
|
|
}
|
|
|
|
/* Set CORE Frequencies to OPP100 */
|
|
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
|
|
|
|
/* Set DCDC2 (MPU) voltage */
|
|
if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
|
|
puts("tps65217_voltage_update failure\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set LDO3 to 1.8V and LDO4 to 3.3V
|
|
*/
|
|
if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
|
|
TPS65217_DEFLS1,
|
|
TPS65217_LDO_VOLTAGE_OUT_1_8,
|
|
TPS65217_LDO_MASK))
|
|
puts("tps65217_reg_write failure\n");
|
|
|
|
if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
|
|
TPS65217_DEFLS2,
|
|
TPS65217_LDO_VOLTAGE_OUT_3_3,
|
|
TPS65217_LDO_MASK))
|
|
puts("tps65217_reg_write failure\n");
|
|
|
|
/* Set MPU Frequency to what we detected now that voltages are set */
|
|
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
enable_i2c0_pin_mux();
|
|
|
|
return &dpll_ddr;
|
|
}
|
|
|
|
void set_uart_mux_conf(void)
|
|
{
|
|
enable_uart0_pin_mux();
|
|
}
|
|
|
|
void set_mux_conf_regs(void)
|
|
{
|
|
enable_board_pin_mux();
|
|
}
|
|
|
|
const struct ctrl_ioregs ioregs = {
|
|
.cm0ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
|
|
.cm1ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
|
|
.cm2ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
|
|
.dt0ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
|
|
.dt1ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
|
|
};
|
|
|
|
void sdram_init(void)
|
|
{
|
|
config_ddr(400, &ioregs,
|
|
&ddr3_data,
|
|
&ddr3_cmd_ctrl_data,
|
|
&ddr3_emif_reg_data, 0);
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
save_omap_boot_params();
|
|
|
|
#if defined(CONFIG_HW_WATCHDOG)
|
|
hw_watchdog_init();
|
|
#endif
|
|
|
|
gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
#ifdef CONFIG_MTD_RAW_NAND
|
|
gpmc_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
static void set_bootmode_env(void)
|
|
{
|
|
char *boot_mode_gpio = "gpio@44e07000_14";
|
|
int ret;
|
|
|
|
struct gpio_desc boot_mode_desc;
|
|
|
|
ret = dm_gpio_lookup_name(boot_mode_gpio, &boot_mode_desc);
|
|
if (ret) {
|
|
printf("%s is not found\n", boot_mode_gpio);
|
|
goto err;
|
|
}
|
|
|
|
ret = dm_gpio_request(&boot_mode_desc, "setup_bootmode_env");
|
|
if (ret && ret != -EBUSY) {
|
|
printf("requesting gpio: %s failed\n", boot_mode_gpio);
|
|
goto err;
|
|
}
|
|
|
|
dm_gpio_set_dir_flags(&boot_mode_desc, GPIOD_IS_IN);
|
|
udelay(10);
|
|
|
|
ret = dm_gpio_get_value(&boot_mode_desc);
|
|
if (ret == 0) {
|
|
env_set("swi_status", "1");
|
|
} else if (ret == 1) {
|
|
env_set("swi_status", "0");
|
|
} else {
|
|
printf("swi status gpio error\n");
|
|
goto err;
|
|
}
|
|
|
|
return;
|
|
|
|
err:
|
|
env_set("swi_status", "err");
|
|
}
|
|
|
|
void lcdbacklight_en(void)
|
|
{
|
|
unsigned long brightness = env_get_ulong("backlight_brightness", 10, 50);
|
|
|
|
if (brightness > 99 || brightness == 0)
|
|
brightness = 99;
|
|
|
|
/*
|
|
* Brightness range:
|
|
* WLEDCTRL2 DUTY[6:0]
|
|
*
|
|
* 000 0000b = 1%
|
|
* 000 0001b = 2%
|
|
* ...
|
|
* 110 0010b = 99%
|
|
* 110 0011b = 100%
|
|
*
|
|
*/
|
|
|
|
tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_WLEDCTRL2,
|
|
brightness, 0xFF);
|
|
tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_WLEDCTRL1,
|
|
brightness != 0 ? 0x0A : 0x02, 0xFF);
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
int ret;
|
|
struct udevice *cdev;
|
|
|
|
set_bootmode_env();
|
|
|
|
ret = uclass_get_device(UCLASS_PANEL, 0, &cdev);
|
|
if (ret) {
|
|
debug("video panel not found: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize to enable backlight */
|
|
if (power_tps65217_init(0))
|
|
return 0;
|
|
|
|
lcdbacklight_en();
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_BOARD_LATE_INIT */
|