mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 13:03:40 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
143 lines
4.2 KiB
C
143 lines
4.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
|
|
*
|
|
* (C) Copyright 2004
|
|
* Texas Instruments.
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Kshitij Gupta <kshitij@ti.com>
|
|
*
|
|
* Configuration settings for the Freescale i.MX31 PDK board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
|
|
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SPL_MAX_SIZE 2048
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
|
|
/* PMIC Controller */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_SPI
|
|
#define CONFIG_POWER_FSL
|
|
#define CONFIG_FSL_PMIC_BUS 1
|
|
#define CONFIG_FSL_PMIC_CS 2
|
|
#define CONFIG_FSL_PMIC_CLK 1000000
|
|
#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
|
|
#define CONFIG_FSL_PMIC_BITLEN 32
|
|
#define CONFIG_RTC_MC13XXX
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
|
|
"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
|
|
"bootcmd=run bootcmd_net\0" \
|
|
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
|
|
"tftpboot 0x81000000 uImage-mx31; bootm\0" \
|
|
"prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \
|
|
"nand erase 0x0 0x40000; " \
|
|
"nand write 0x81000000 0x0 0x40000\0"
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x80010000
|
|
|
|
/* default load address */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x81000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define PHYS_SDRAM_1 CSD0_BASE
|
|
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE)
|
|
|
|
/*
|
|
* environment organization
|
|
*/
|
|
|
|
/*
|
|
* NAND driver
|
|
*/
|
|
#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
|
|
#define CONFIG_MXC_NAND_HWECC
|
|
#define CONFIG_SYS_NAND_LARGEPAGE
|
|
|
|
/* NAND configuration for the NAND_SPL */
|
|
|
|
/* Start copying real U-Boot from the second page */
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800
|
|
/* Load U-Boot to this address */
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
|
|
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
|
|
/* Configuration of lowlevel_init.S (clocks and SDRAM) */
|
|
#define CCM_CCMR_SETUP 0x074B0BF5
|
|
#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \
|
|
PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | \
|
|
PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | \
|
|
PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0))
|
|
#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \
|
|
PLL_MFN(12))
|
|
|
|
#define ESDMISC_MDDR_SETUP 0x00000004
|
|
#define ESDMISC_MDDR_RESET_DL 0x0000000c
|
|
#define ESDCFG0_MDDR_SETUP 0x006ac73a
|
|
|
|
#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
|
|
#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
|
|
ESDCTL_DSIZ(2) | ESDCTL_BL(1))
|
|
#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
|
|
#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
|
|
#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
|
|
#define ESDCTL_RW ESDCTL_SETTINGS
|
|
|
|
#endif /* __CONFIG_H */
|