mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 13:03:40 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
108 lines
3.4 KiB
C
108 lines
3.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
|
|
* Copyright (C) 2012 Renesas Solutions Corp.
|
|
*/
|
|
|
|
#ifndef __KZM9G_H
|
|
#define __KZM9G_H
|
|
|
|
#define CONFIG_SH73A0
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_KZM9G
|
|
|
|
#include <asm/arch/rmobile.h>
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
/* MEMORY */
|
|
#define KZM_SDRAM_BASE (0x40000000)
|
|
#define PHYS_SDRAM KZM_SDRAM_BASE
|
|
#define PHYS_SDRAM_SIZE (512 * 1024 * 1024)
|
|
|
|
/* NOR Flash */
|
|
#define KZM_FLASH_BASE (0x00000000)
|
|
#define CONFIG_SYS_FLASH_BASE (KZM_FLASH_BASE)
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS (1)
|
|
#define CONFIG_SYS_MAX_FLASH_SECT (512)
|
|
|
|
/* prompt */
|
|
#define CONFIG_SYS_PBSIZE 256
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
|
|
|
|
/* SCIF */
|
|
#define CONFIG_CONS_SCIF4
|
|
|
|
#define CONFIG_SYS_MEMTEST_START (KZM_SDRAM_BASE)
|
|
#define CONFIG_SYS_MEMTEST_END \
|
|
(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
|
|
#undef CONFIG_SYS_MEMTEST_SCRATCH
|
|
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (0xE5600000) /* on MERAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (0x10000)
|
|
#define LOW_LEVEL_MERAM_STACK (CONFIG_SYS_INIT_RAM_ADDR - 4)
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SDRAM_OFFSET_FOR_RT (16 * 1024 * 1024)
|
|
#define CONFIG_SYS_SDRAM_BASE (KZM_SDRAM_BASE + CONFIG_SDRAM_OFFSET_FOR_RT)
|
|
#define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_SIZE - CONFIG_SDRAM_OFFSET_FOR_RT)
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE (KZM_FLASH_BASE)
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
|
|
|
|
#define CONFIG_STANDALONE_LOAD_ADDR 0x41000000
|
|
|
|
/* FLASH */
|
|
#undef CONFIG_SYS_FLASH_QUIET_TEST
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define FLASH_SECTOR_SIZE (256 * 1024) /* 256 KB sectors */
|
|
|
|
/* Timeout for Flash erase operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
|
|
/* Timeout for Flash write operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
|
|
/* Timeout for Flash set sector lock bit operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
|
|
/* Timeout for Flash clear lock bit operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
|
|
|
|
#undef CONFIG_SYS_DIRECT_FLASH_TFTP
|
|
|
|
/* GPIO / PFC */
|
|
#define CONFIG_SH_GPIO_PFC
|
|
|
|
/* Clock */
|
|
#define CONFIG_GLOBAL_TIMER
|
|
#define CONFIG_SYS_CLK_FREQ (48000000)
|
|
#define CONFIG_SYS_CPU_CLK (1196000000)
|
|
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
|
|
#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
|
|
|
|
#define CONFIG_NFS_TIMEOUT 10000UL
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_SH
|
|
#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 5
|
|
#define CONFIG_SYS_I2C_SH_BASE0 0xE6820000
|
|
#define CONFIG_SYS_I2C_SH_SPEED0 100000
|
|
#define CONFIG_SYS_I2C_SH_BASE1 0xE6822000
|
|
#define CONFIG_SYS_I2C_SH_SPEED1 100000
|
|
#define CONFIG_SYS_I2C_SH_BASE2 0xE6824000
|
|
#define CONFIG_SYS_I2C_SH_SPEED2 100000
|
|
#define CONFIG_SYS_I2C_SH_BASE3 0xE6826000
|
|
#define CONFIG_SYS_I2C_SH_SPEED3 100000
|
|
#define CONFIG_SYS_I2C_SH_BASE4 0xE6828000
|
|
#define CONFIG_SYS_I2C_SH_SPEED4 100000
|
|
#define CONFIG_SH_I2C_8BIT
|
|
#define CONFIG_SH_I2C_DATA_HIGH 4
|
|
#define CONFIG_SH_I2C_DATA_LOW 5
|
|
#define CONFIG_SH_I2C_CLOCK 104000000 /* 104 MHz */
|
|
|
|
#endif /* __KZM9G_H */
|