u-boot/board/keymile/scripts
Holger Brunck d4348a8db7 km/scripts: product env and auto-reset for ramfs
This patch adds the possibility in both debug and ramfs modes to
optionally load an env file from /tftpboot/$tftppath (this is ignored if
not present, so the change is backward compatible). This gives the debug
and ramfs scripts the possibility to set uboot environment variables
that were previously asked the users to manually set (nfs path in debug
and rootfs size in ramfs).

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Tom Rini <trini@konsulko.com>
2020-01-23 07:29:58 -05:00
..
develop-arm.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
develop-common.txt km/scripts: product env and auto-reset for ramfs 2020-01-23 07:29:58 -05:00
develop-ppc_8xx.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
develop-ppc_82xx.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
ramfs-arm.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
ramfs-common.txt km/scripts: product env and auto-reset for ramfs 2020-01-23 07:29:58 -05:00
ramfs-ppc_8xx.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
ramfs-ppc_82xx.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
README km/common: add toolchain variable 2011-12-20 23:43:45 +01:00

These scripts are needed for our development usecases. Copy this directory
into your tftp root directory to be able to use this scripts.
cp -r <u-boot-repo>/board/keymile/scripts <your_tftp_root>/

To load and configure these usecase, two environment variables in the u-boot
default environment must be parsed:
run develop : setup environment to configure for rootfs via nfs
run ramfs   : setup environment to configure for rootfs in ram

Last change: 24.11.2011

develop-common.txt
============================
This file defines variables for working with rootfs via nfs for powerpc and
arm.

develop-<arch>.txt
============================
This file defines architecture specific variables for working with rootfs via
nfs arm.


ramfs-common.txt
============================
This file defines variables for working with rootfs inside the ram for powerpc
and arm.

ramfs-<arch>.txt
============================
This file defines architecture specific variables for working with rootfs inside
ram.