Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-15 17:28:15 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/CZ.NIC/turris_omnia/turris_omnia.c
Baruch Siach d78ecc7339 mvebu: turris_omnia: add note about i2c slave disable 
Code that disables the i2c slave is now in the mvtwsi i2c driver.
Platform must enable DM_I2C to use that code. Add a comment in the code
as a reminder for the planned DM_I2C migration of Turris Omnia.

Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2018-06-07 14:20:09 +02:00

545 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
* Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
*
* Derived from the code for
* Marvell/db-88f6820-gp by Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <environment.h>
#include <i2c.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <dm/uclass.h>
#include <fdt_support.h>
#include <time.h>
#ifdef CONFIG_ATSHA204A
# include <atsha204a-i2c.h>
#endif
#ifdef CONFIG_WDT_ORION
# include <wdt.h>
#endif
#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
#include <../serdes/a38x/high_speed_env_spec.h>
DECLARE_GLOBAL_DATA_PTR;
#define OMNIA_I2C_EEPROM_DM_NAME "i2c@0"
#define OMNIA_I2C_EEPROM 0x54
#define OMNIA_I2C_EEPROM_CONFIG_ADDR 0x0
#define OMNIA_I2C_EEPROM_ADDRLEN 2
#define OMNIA_I2C_EEPROM_MAGIC 0x0341a034
#define OMNIA_I2C_MCU_DM_NAME "i2c@0"
#define OMNIA_I2C_MCU_ADDR_STATUS 0x1
#define OMNIA_I2C_MCU_SATA 0x20
#define OMNIA_I2C_MCU_CARDDET 0x10
#define OMNIA_I2C_MCU 0x2a
#define OMNIA_I2C_MCU_WDT_ADDR 0x0b
#define OMNIA_ATSHA204_OTP_VERSION 0
#define OMNIA_ATSHA204_OTP_SERIAL 1
#define OMNIA_ATSHA204_OTP_MAC0 3
#define OMNIA_ATSHA204_OTP_MAC1 4
#define MVTWSI_ARMADA_DEBUG_REG 0x8c
/*
* Those values and defines are taken from the Marvell U-Boot version
* "u-boot-2013.01-2014_T3.0"
*/
#define OMNIA_GPP_OUT_ENA_LOW \
(~(BIT(1) | BIT(4) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | \
BIT(10) | BIT(11) | BIT(19) | BIT(22) | BIT(23) | BIT(25) | \
BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31)))
#define OMNIA_GPP_OUT_ENA_MID \
(~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) | \
BIT(16) | BIT(17) | BIT(18)))
#define OMNIA_GPP_OUT_VAL_LOW 0x0
#define OMNIA_GPP_OUT_VAL_MID 0x0
#define OMNIA_GPP_POL_LOW 0x0
#define OMNIA_GPP_POL_MID 0x0
static struct serdes_map board_serdes_map_pex[] = {
{PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
};
static struct serdes_map board_serdes_map_sata[] = {
{SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
};
static bool omnia_detect_sata(void)
{
struct udevice *bus, *dev;
int ret, retry = 3;
u16 mode;
puts("SERDES0 card detect: ");
if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
puts("Cannot find MCU bus!\n");
return false;
}
ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
if (ret) {
puts("Cannot get MCU chip!\n");
return false;
}
for (; retry > 0; --retry) {
ret = dm_i2c_read(dev, OMNIA_I2C_MCU_ADDR_STATUS, (uchar *) &mode, 2);
if (!ret)
break;
}
if (!retry) {
puts("I2C read failed! Default PEX\n");
return false;
}
if (!(mode & OMNIA_I2C_MCU_CARDDET)) {
puts("NONE\n");
return false;
}
if (mode & OMNIA_I2C_MCU_SATA) {
puts("SATA\n");
return true;
} else {
puts("PEX\n");
return false;
}
}
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
{
if (omnia_detect_sata()) {
*serdes_map_array = board_serdes_map_sata;
*count = ARRAY_SIZE(board_serdes_map_sata);
} else {
*serdes_map_array = board_serdes_map_pex;
*count = ARRAY_SIZE(board_serdes_map_pex);
}
return 0;
}
struct omnia_eeprom {
u32 magic;
u32 ramsize;
char region[4];
u32 crc;
};
static bool omnia_read_eeprom(struct omnia_eeprom *oep)
{
struct udevice *bus, *dev;
int ret, crc, retry = 3;
if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_EEPROM_DM_NAME, &bus)) {
puts("Cannot find EEPROM bus\n");
return false;
}
ret = i2c_get_chip(bus, OMNIA_I2C_EEPROM, OMNIA_I2C_EEPROM_ADDRLEN, &dev);
if (ret) {
puts("Cannot get EEPROM chip\n");
return false;
}
for (; retry > 0; --retry) {
ret = dm_i2c_read(dev, OMNIA_I2C_EEPROM_CONFIG_ADDR, (uchar *) oep, sizeof(struct omnia_eeprom));
if (ret)
continue;
if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) {
puts("I2C EEPROM missing magic number!\n");
continue;
}
crc = crc32(0, (unsigned char *) oep,
sizeof(struct omnia_eeprom) - 4);
if (crc == oep->crc) {
break;
} else {
printf("CRC of EEPROM memory config failed! "
"calc=0x%04x saved=0x%04x\n", crc, oep->crc);
}
}
if (!retry) {
puts("I2C EEPROM read failed!\n");
return false;
}
return true;
}
/*
* Define the DDR layout / topology here in the board file. This will
* be used by the DDR3 init code in the SPL U-Boot version to configure
* the DDR3 controller.
*/
static struct mv_ddr_topology_map board_topology_map_1g = {
DEBUG_LEVEL_ERROR,
0x1, /* active interfaces */
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
{ { { {0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0} },
SPEED_BIN_DDR_1600K, /* speed_bin */
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
MV_DDR_TEMP_NORMAL, /* temperature */
MV_DDR_TIM_2T} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
{0} /* timing parameters */
};
static struct mv_ddr_topology_map board_topology_map_2g = {
DEBUG_LEVEL_ERROR,
0x1, /* active interfaces */
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
{ { { {0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0} },
SPEED_BIN_DDR_1600K, /* speed_bin */
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
MV_DDR_DIE_CAP_8GBIT, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
MV_DDR_TEMP_NORMAL, /* temperature */
MV_DDR_TIM_2T} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
{0} /* timing parameters */
};
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
{
static int mem = 0;
struct omnia_eeprom oep;
/* Get the board config from EEPROM */
if (mem == 0) {
if(!omnia_read_eeprom(&oep))
goto out;
printf("Memory config in EEPROM: 0x%02x\n", oep.ramsize);
if (oep.ramsize == 0x2)
mem = 2;
else
mem = 1;
}
out:
/* Hardcoded fallback */
if (mem == 0) {
puts("WARNING: Memory config from EEPROM read failed.\n");
puts("Falling back to default 1GiB map.\n");
mem = 1;
}
/* Return the board topology as defined in the board code */
if (mem == 1)
return &board_topology_map_1g;
if (mem == 2)
return &board_topology_map_2g;
return &board_topology_map_1g;
}
#ifndef CONFIG_SPL_BUILD
static int set_regdomain(void)
{
struct omnia_eeprom oep;
char rd[3] = {' ', ' ', 0};
if (omnia_read_eeprom(&oep))
memcpy(rd, &oep.region, 2);
else
puts("EEPROM regdomain read failed.\n");
printf("Regdomain set to %s\n", rd);
return env_set("regdomain", rd);
}
#endif
int board_early_init_f(void)
{
u32 i2c_debug_reg;
/* Configure MPP */
writel(0x11111111, MVEBU_MPP_BASE + 0x00);
writel(0x11111111, MVEBU_MPP_BASE + 0x04);
writel(0x11244011, MVEBU_MPP_BASE + 0x08);
writel(0x22222111, MVEBU_MPP_BASE + 0x0c);
writel(0x22200002, MVEBU_MPP_BASE + 0x10);
writel(0x30042022, MVEBU_MPP_BASE + 0x14);
writel(0x55550555, MVEBU_MPP_BASE + 0x18);
writel(0x00005550, MVEBU_MPP_BASE + 0x1c);
/* Set GPP Out value */
writel(OMNIA_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
writel(OMNIA_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
/* Set GPP Polarity */
writel(OMNIA_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
writel(OMNIA_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
/* Set GPP Out Enable */
writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
/*
* Disable I2C debug mode blocking 0x64 I2C address.
* Note: that would be redundant once Turris Omnia migrates to DM_I2C,
* because the mvtwsi driver includes equivalent code.
*/
i2c_debug_reg = readl(MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
i2c_debug_reg &= ~(1<<18);
writel(i2c_debug_reg, MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
return 0;
}
#ifndef CONFIG_SPL_BUILD
static bool disable_mcu_watchdog(void)
{
struct udevice *bus, *dev;
int ret, retry = 3;
uchar buf[1] = {0x0};
if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
puts("Cannot find MCU bus! Can not disable MCU WDT.\n");
return false;
}
ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
if (ret) {
puts("Cannot get MCU chip! Can not disable MCU WDT.\n");
return false;
}
for (; retry > 0; --retry)
if (!dm_i2c_write(dev, OMNIA_I2C_MCU_WDT_ADDR, (uchar *) buf, 1))
break;
if (retry <= 0) {
puts("I2C MCU watchdog failed to disable!\n");
return false;
}
return true;
}
#endif
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
static struct udevice *watchdog_dev = NULL;
#endif
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
#ifndef CONFIG_SPL_BUILD
# ifdef CONFIG_WDT_ORION
if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
puts("Cannot find Armada 385 watchdog!\n");
} else {
puts("Enabling Armada 385 watchdog.\n");
wdt_start(watchdog_dev, (u32) 25000000 * 120, 0);
}
# endif
if (disable_mcu_watchdog())
puts("Disabled MCU startup watchdog.\n");
set_regdomain();
#endif
return 0;
}
#ifdef CONFIG_WATCHDOG
/* Called by macro WATCHDOG_RESET */
void watchdog_reset(void)
{
# if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
static ulong next_reset = 0;
ulong now;
if (!watchdog_dev)
return;
now = timer_get_us();
/* Do not reset the watchdog too often */
if (now > next_reset) {
wdt_reset(watchdog_dev);
next_reset = now + 1000;
}
# endif
}
#endif
int board_late_init(void)
{
#ifndef CONFIG_SPL_BUILD
set_regdomain();
#endif
return 0;
}
#ifdef CONFIG_ATSHA204A
static struct udevice *get_atsha204a_dev(void)
{
static struct udevice *dev = NULL;
if (dev != NULL)
return dev;
if (uclass_get_device_by_name(UCLASS_MISC, "atsha204a@64", &dev)) {
puts("Cannot find ATSHA204A on I2C bus!\n");
dev = NULL;
}
return dev;
}
#endif
int checkboard(void)
{
u32 version_num, serial_num;
int err = 1;
#ifdef CONFIG_ATSHA204A
struct udevice *dev = get_atsha204a_dev();
if (dev) {
err = atsha204a_wakeup(dev);
if (err)
goto out;
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
OMNIA_ATSHA204_OTP_VERSION,
(u8 *) &version_num);
if (err)
goto out;
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
OMNIA_ATSHA204_OTP_SERIAL,
(u8 *) &serial_num);
if (err)
goto out;
atsha204a_sleep(dev);
}
out:
#endif
if (err)
printf("Board: Turris Omnia (ver N/A). SN: N/A\n");
else
printf("Board: Turris Omnia SNL %08X%08X\n",
be32_to_cpu(version_num), be32_to_cpu(serial_num));
return 0;
}
static void increment_mac(u8 *mac)
{
int i;
for (i = 5; i >= 3; i--) {
mac[i] += 1;
if (mac[i])
break;
}
}
int misc_init_r(void)
{
#ifdef CONFIG_ATSHA204A
int err;
struct udevice *dev = get_atsha204a_dev();
u8 mac0[4], mac1[4], mac[6];
if (!dev)
goto out;
err = atsha204a_wakeup(dev);
if (err)
goto out;
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
OMNIA_ATSHA204_OTP_MAC0, mac0);
if (err)
goto out;
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
OMNIA_ATSHA204_OTP_MAC1, mac1);
if (err)
goto out;
atsha204a_sleep(dev);
mac[0] = mac0[1];
mac[1] = mac0[2];
mac[2] = mac0[3];
mac[3] = mac1[1];
mac[4] = mac1[2];
mac[5] = mac1[3];
if (is_valid_ethaddr(mac))
eth_env_set_enetaddr("ethaddr", mac);
increment_mac(mac);
if (is_valid_ethaddr(mac))
eth_env_set_enetaddr("eth1addr", mac);
increment_mac(mac);
if (is_valid_ethaddr(mac))
eth_env_set_enetaddr("eth2addr", mac);
out:
#endif
return 0;
}
Reference in a new issue View git blame Copy permalink