mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 16:53:06 +00:00
975f4117d5
The e10133 workaround was broken in two places:
- The code intended to temporarily mask all interrupts in GPC_IMRx_CORE0.
While the old register values were saved, the actual masking was
missing.
- imx_udelay() expects the system counter to run at its base frequency,
but the system counter is switched to a lower frequency earlier in
psci_system_suspend(), leading to a much longer delay than intended.
Replace the call with an equivalent loop (linux-imx 5.15 does the same)
This fixes the SoC hanging forever when there was already a wakeup IRQ
pending while suspending.
Fixes: 57b620255e
("imx: mx7: add system suspend/resume support")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
693 lines
18 KiB
C
693 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
|
|
* Copyright 2017 NXP
|
|
*/
|
|
|
|
#include <cpu_func.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/io.h>
|
|
#include <asm/psci.h>
|
|
#include <asm/secure.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/armv7.h>
|
|
#include <asm/gic.h>
|
|
#include <linux/bitops.h>
|
|
#include <common.h>
|
|
#include <fsl_wdog.h>
|
|
|
|
#define GPC_LPCR_A7_BSC 0x0
|
|
#define GPC_LPCR_A7_AD 0x4
|
|
#define GPC_SLPCR 0x14
|
|
#define GPC_PGC_ACK_SEL_A7 0x24
|
|
#define GPC_IMR1_CORE0 0x30
|
|
#define GPC_SLOT0_CFG 0xb0
|
|
#define GPC_CPU_PGC_SW_PUP_REQ 0xf0
|
|
#define GPC_CPU_PGC_SW_PDN_REQ 0xfc
|
|
#define GPC_PGC_C0 0x800
|
|
#define GPC_PGC_C0 0x800
|
|
#define GPC_PGC_C1 0x840
|
|
#define GPC_PGC_SCU 0x880
|
|
|
|
#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM 0x4000
|
|
#define BM_LPCR_A7_BSC_LPM1 0xc
|
|
#define BM_LPCR_A7_BSC_LPM0 0x3
|
|
#define BP_LPCR_A7_BSC_LPM0 0
|
|
#define BM_SLPCR_EN_DSM 0x80000000
|
|
#define BM_SLPCR_RBC_EN 0x40000000
|
|
#define BM_SLPCR_REG_BYPASS_COUNT 0x3f000000
|
|
#define BM_SLPCR_VSTBY 0x4
|
|
#define BM_SLPCR_SBYOS 0x2
|
|
#define BM_SLPCR_BYPASS_PMIC_READY 0x1
|
|
#define BM_LPCR_A7_AD_L2PGE 0x10000
|
|
#define BM_LPCR_A7_AD_EN_C1_PUP 0x800
|
|
#define BM_LPCR_A7_AD_EN_C0_PUP 0x200
|
|
#define BM_LPCR_A7_AD_EN_PLAT_PDN 0x10
|
|
#define BM_LPCR_A7_AD_EN_C1_PDN 0x8
|
|
#define BM_LPCR_A7_AD_EN_C0_PDN 0x2
|
|
|
|
#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE0_A7 0x1
|
|
#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 0x2
|
|
|
|
#define BM_GPC_PGC_ACK_SEL_A7_PD_DUMMY_ACK 0x8000
|
|
#define BM_GPC_PGC_ACK_SEL_A7_PU_DUMMY_ACK 0x80000000
|
|
|
|
#define MAX_SLOT_NUMBER 10
|
|
#define A7_LPM_WAIT 0x5
|
|
#define A7_LPM_STOP 0xa
|
|
|
|
#define BM_SYS_COUNTER_CNTCR_FCR1 0x200
|
|
#define BM_SYS_COUNTER_CNTCR_FCR0 0x100
|
|
|
|
#define REG_SET 0x4
|
|
#define REG_CLR 0x8
|
|
|
|
#define ANADIG_ARM_PLL 0x60
|
|
#define ANADIG_DDR_PLL 0x70
|
|
#define ANADIG_SYS_PLL 0xb0
|
|
#define ANADIG_ENET_PLL 0xe0
|
|
#define ANADIG_AUDIO_PLL 0xf0
|
|
#define ANADIG_VIDEO_PLL 0x130
|
|
#define BM_ANATOP_ARM_PLL_OVERRIDE BIT(20)
|
|
#define BM_ANATOP_DDR_PLL_OVERRIDE BIT(19)
|
|
#define BM_ANATOP_SYS_PLL_OVERRIDE (0x1ff << 17)
|
|
#define BM_ANATOP_ENET_PLL_OVERRIDE BIT(13)
|
|
#define BM_ANATOP_AUDIO_PLL_OVERRIDE BIT(24)
|
|
#define BM_ANATOP_VIDEO_PLL_OVERRIDE BIT(24)
|
|
|
|
#define DDRC_STAT 0x4
|
|
#define DDRC_PWRCTL 0x30
|
|
#define DDRC_PSTAT 0x3fc
|
|
|
|
#define SRC_GPR1_MX7D 0x074
|
|
#define SRC_GPR2_MX7D 0x078
|
|
#define SRC_A7RCR0 0x004
|
|
#define SRC_A7RCR1 0x008
|
|
|
|
#define BP_SRC_A7RCR0_A7_CORE_RESET0 0
|
|
#define BP_SRC_A7RCR1_A7_CORE1_ENABLE 1
|
|
|
|
#define SNVS_LPCR 0x38
|
|
#define BP_SNVS_LPCR_DP_EN 0x20
|
|
#define BP_SNVS_LPCR_TOP 0x40
|
|
|
|
#define CCM_CCGR_SNVS 0x4250
|
|
|
|
#define CCM_ROOT_WDOG 0xbb80
|
|
#define CCM_CCGR_WDOG1 0x49c0
|
|
|
|
#define MPIDR_AFF0 GENMASK(7, 0)
|
|
|
|
#define IMX7D_PSCI_NR_CPUS 2
|
|
#if IMX7D_PSCI_NR_CPUS > CONFIG_ARMV7_PSCI_NR_CPUS
|
|
#error "invalid value for CONFIG_ARMV7_PSCI_NR_CPUS"
|
|
#endif
|
|
|
|
#define imx_cpu_gpr_entry_offset(cpu) \
|
|
(SRC_BASE_ADDR + SRC_GPR1_MX7D + cpu * 8)
|
|
#define imx_cpu_gpr_para_offset(cpu) \
|
|
(imx_cpu_gpr_entry_offset(cpu) + 4)
|
|
|
|
#define IMX_CPU_SYNC_OFF ~0
|
|
#define IMX_CPU_SYNC_ON 0
|
|
|
|
u8 psci_state[IMX7D_PSCI_NR_CPUS] __secure_data = {
|
|
PSCI_AFFINITY_LEVEL_ON,
|
|
PSCI_AFFINITY_LEVEL_OFF};
|
|
|
|
enum imx_gpc_slot {
|
|
CORE0_A7,
|
|
CORE1_A7,
|
|
SCU_A7,
|
|
FAST_MEGA_MIX,
|
|
MIPI_PHY,
|
|
PCIE_PHY,
|
|
USB_OTG1_PHY,
|
|
USB_OTG2_PHY,
|
|
USB_HSIC_PHY,
|
|
CORE0_M4,
|
|
};
|
|
|
|
enum mxc_cpu_pwr_mode {
|
|
RUN,
|
|
WAIT,
|
|
STOP,
|
|
};
|
|
|
|
extern void psci_system_resume(void);
|
|
|
|
static inline void psci_set_state(int cpu, u8 state)
|
|
{
|
|
psci_state[cpu] = state;
|
|
dsb();
|
|
isb();
|
|
}
|
|
|
|
static inline void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
|
|
{
|
|
writel(enable, GPC_IPS_BASE_ADDR + offset);
|
|
}
|
|
|
|
__secure void imx_gpcv2_set_core_power(int cpu, bool pdn)
|
|
{
|
|
u32 reg = pdn ? GPC_CPU_PGC_SW_PUP_REQ : GPC_CPU_PGC_SW_PDN_REQ;
|
|
u32 pgc = cpu ? GPC_PGC_C1 : GPC_PGC_C0;
|
|
u32 pdn_pup_req = cpu ? BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 :
|
|
BM_CPU_PGC_SW_PDN_PUP_REQ_CORE0_A7;
|
|
u32 val;
|
|
|
|
imx_gpcv2_set_m_core_pgc(true, pgc);
|
|
|
|
val = readl(GPC_IPS_BASE_ADDR + reg);
|
|
val |= pdn_pup_req;
|
|
writel(val, GPC_IPS_BASE_ADDR + reg);
|
|
|
|
while ((readl(GPC_IPS_BASE_ADDR + reg) & pdn_pup_req) != 0)
|
|
;
|
|
|
|
imx_gpcv2_set_m_core_pgc(false, pgc);
|
|
}
|
|
|
|
__secure void imx_enable_cpu_ca7(int cpu, bool enable)
|
|
{
|
|
u32 mask, val;
|
|
|
|
mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1);
|
|
val = readl(SRC_BASE_ADDR + SRC_A7RCR1);
|
|
val = enable ? val | mask : val & ~mask;
|
|
writel(val, SRC_BASE_ADDR + SRC_A7RCR1);
|
|
}
|
|
|
|
__secure void psci_arch_cpu_entry(void)
|
|
{
|
|
u32 cpu = psci_get_cpu_id();
|
|
|
|
psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON);
|
|
}
|
|
|
|
__secure s32 psci_cpu_on(u32 __always_unused function_id, u32 mpidr, u32 ep,
|
|
u32 context_id)
|
|
{
|
|
u32 cpu = mpidr & MPIDR_AFF0;
|
|
|
|
if (mpidr & ~MPIDR_AFF0)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
if (cpu >= IMX7D_PSCI_NR_CPUS)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
if (psci_state[cpu] == PSCI_AFFINITY_LEVEL_ON)
|
|
return ARM_PSCI_RET_ALREADY_ON;
|
|
|
|
if (psci_state[cpu] == PSCI_AFFINITY_LEVEL_ON_PENDING)
|
|
return ARM_PSCI_RET_ON_PENDING;
|
|
|
|
psci_save(cpu, ep, context_id);
|
|
|
|
writel((u32)psci_cpu_entry, imx_cpu_gpr_entry_offset(cpu));
|
|
|
|
psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON_PENDING);
|
|
|
|
imx_gpcv2_set_core_power(cpu, true);
|
|
imx_enable_cpu_ca7(cpu, true);
|
|
|
|
return ARM_PSCI_RET_SUCCESS;
|
|
}
|
|
|
|
__secure s32 psci_cpu_off(void)
|
|
{
|
|
int cpu;
|
|
|
|
cpu = psci_get_cpu_id();
|
|
|
|
psci_cpu_off_common();
|
|
psci_set_state(cpu, PSCI_AFFINITY_LEVEL_OFF);
|
|
|
|
imx_enable_cpu_ca7(cpu, false);
|
|
imx_gpcv2_set_core_power(cpu, false);
|
|
/*
|
|
* We use the cpu jumping argument register to sync with
|
|
* psci_affinity_info() which is running on cpu0 to kill the cpu.
|
|
*/
|
|
writel(IMX_CPU_SYNC_OFF, imx_cpu_gpr_para_offset(cpu));
|
|
|
|
while (1)
|
|
wfi();
|
|
}
|
|
|
|
__secure void psci_system_reset(void)
|
|
{
|
|
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
|
|
|
|
/* make sure WDOG1 clock is enabled */
|
|
writel(0x1 << 28, CCM_BASE_ADDR + CCM_ROOT_WDOG);
|
|
writel(0x3, CCM_BASE_ADDR + CCM_CCGR_WDOG1);
|
|
writew(WCR_WDE, &wdog->wcr);
|
|
|
|
while (1)
|
|
wfi();
|
|
}
|
|
|
|
__secure void psci_system_off(void)
|
|
{
|
|
u32 val;
|
|
|
|
/* make sure SNVS clock is enabled */
|
|
writel(0x3, CCM_BASE_ADDR + CCM_CCGR_SNVS);
|
|
|
|
val = readl(SNVS_BASE_ADDR + SNVS_LPCR);
|
|
val |= BP_SNVS_LPCR_DP_EN | BP_SNVS_LPCR_TOP;
|
|
writel(val, SNVS_BASE_ADDR + SNVS_LPCR);
|
|
|
|
while (1)
|
|
wfi();
|
|
}
|
|
|
|
__secure u32 psci_version(void)
|
|
{
|
|
return ARM_PSCI_VER_1_0;
|
|
}
|
|
|
|
__secure s32 psci_cpu_suspend(u32 __always_unused function_id, u32 power_state,
|
|
u32 entry_point_address,
|
|
u32 context_id)
|
|
{
|
|
return ARM_PSCI_RET_INVAL;
|
|
}
|
|
|
|
__secure s32 psci_affinity_info(u32 __always_unused function_id,
|
|
u32 target_affinity,
|
|
u32 lowest_affinity_level)
|
|
{
|
|
u32 cpu = target_affinity & MPIDR_AFF0;
|
|
|
|
if (lowest_affinity_level > 0)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
if (target_affinity & ~MPIDR_AFF0)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
if (cpu >= IMX7D_PSCI_NR_CPUS)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
/* CPU is waiting for killed */
|
|
if (readl(imx_cpu_gpr_para_offset(cpu)) == IMX_CPU_SYNC_OFF) {
|
|
imx_enable_cpu_ca7(cpu, false);
|
|
imx_gpcv2_set_core_power(cpu, false);
|
|
writel(IMX_CPU_SYNC_ON, imx_cpu_gpr_para_offset(cpu));
|
|
}
|
|
|
|
return psci_state[cpu];
|
|
}
|
|
|
|
__secure u32 psci_migrate_info_type(void)
|
|
{
|
|
/* Trusted OS is either not present or does not require migration */
|
|
return 2;
|
|
}
|
|
|
|
__secure s32 psci_features(u32 __always_unused function_id, u32 psci_fid)
|
|
{
|
|
switch (psci_fid) {
|
|
case ARM_PSCI_0_2_FN_PSCI_VERSION:
|
|
case ARM_PSCI_0_2_FN_CPU_OFF:
|
|
case ARM_PSCI_0_2_FN_CPU_ON:
|
|
case ARM_PSCI_0_2_FN_AFFINITY_INFO:
|
|
case ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE:
|
|
case ARM_PSCI_0_2_FN_SYSTEM_OFF:
|
|
case ARM_PSCI_0_2_FN_SYSTEM_RESET:
|
|
case ARM_PSCI_1_0_FN_PSCI_FEATURES:
|
|
case ARM_PSCI_1_0_FN_SYSTEM_SUSPEND:
|
|
return 0x0;
|
|
}
|
|
return ARM_PSCI_RET_NI;
|
|
}
|
|
|
|
static __secure void imx_gpcv2_set_lpm_mode(enum mxc_cpu_pwr_mode mode)
|
|
{
|
|
u32 val1, val2, val3;
|
|
|
|
val1 = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_BSC);
|
|
val2 = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
|
|
/* all cores' LPM settings must be same */
|
|
val1 &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
|
|
val1 |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
|
|
|
|
val2 &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN |
|
|
BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
|
|
/*
|
|
* GPC: When improper low-power sequence is used,
|
|
* the SoC enters low power mode before the ARM core executes WFI.
|
|
*
|
|
* Software workaround:
|
|
* 1) Software should trigger IRQ #32 (IOMUX) to be always pending
|
|
* by setting IOMUX_GPR1_IRQ.
|
|
* 2) Software should then unmask IRQ #32 in GPC before setting GPC
|
|
* Low-Power mode.
|
|
* 3) Software should mask IRQ #32 right after GPC Low-Power mode
|
|
* is set.
|
|
*/
|
|
switch (mode) {
|
|
case RUN:
|
|
val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
|
|
val3 &= ~0x1;
|
|
writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
|
|
break;
|
|
case WAIT:
|
|
val1 |= A7_LPM_WAIT << BP_LPCR_A7_BSC_LPM0;
|
|
val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
|
|
val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
|
|
val3 &= ~0x1;
|
|
writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
|
|
break;
|
|
case STOP:
|
|
val1 |= A7_LPM_STOP << BP_LPCR_A7_BSC_LPM0;
|
|
val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
|
|
val2 |= BM_SLPCR_EN_DSM;
|
|
val2 |= BM_SLPCR_SBYOS;
|
|
val2 |= BM_SLPCR_VSTBY;
|
|
val2 |= BM_SLPCR_BYPASS_PMIC_READY;
|
|
val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
|
|
val3 |= 0x1;
|
|
writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
writel(val1, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_BSC);
|
|
writel(val2, GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
}
|
|
|
|
static __secure void imx_gpcv2_set_plat_power_gate_by_lpm(bool pdn)
|
|
{
|
|
u32 val = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD);
|
|
|
|
val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
|
|
if (pdn)
|
|
val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
|
|
|
|
writel(val, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD);
|
|
}
|
|
|
|
static __secure void imx_gpcv2_set_cpu_power_gate_by_lpm(u32 cpu, bool pdn)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD);
|
|
if (cpu == 0) {
|
|
if (pdn)
|
|
val |= BM_LPCR_A7_AD_EN_C0_PDN |
|
|
BM_LPCR_A7_AD_EN_C0_PUP;
|
|
else
|
|
val &= ~(BM_LPCR_A7_AD_EN_C0_PDN |
|
|
BM_LPCR_A7_AD_EN_C0_PUP);
|
|
}
|
|
if (cpu == 1) {
|
|
if (pdn)
|
|
val |= BM_LPCR_A7_AD_EN_C1_PDN |
|
|
BM_LPCR_A7_AD_EN_C1_PUP;
|
|
else
|
|
val &= ~(BM_LPCR_A7_AD_EN_C1_PDN |
|
|
BM_LPCR_A7_AD_EN_C1_PUP);
|
|
}
|
|
writel(val, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD);
|
|
}
|
|
|
|
static __secure void imx_gpcv2_set_slot_ack(u32 index, enum imx_gpc_slot m_core,
|
|
bool mode, bool ack)
|
|
{
|
|
u32 val;
|
|
|
|
if (index >= MAX_SLOT_NUMBER)
|
|
return;
|
|
|
|
/* set slot */
|
|
writel(readl(GPC_IPS_BASE_ADDR + GPC_SLOT0_CFG + index * 4) |
|
|
((mode + 1) << (m_core * 2)),
|
|
GPC_IPS_BASE_ADDR + GPC_SLOT0_CFG + index * 4);
|
|
|
|
if (ack) {
|
|
/* set ack */
|
|
val = readl(GPC_IPS_BASE_ADDR + GPC_PGC_ACK_SEL_A7);
|
|
/* clear dummy ack */
|
|
val &= ~(mode ? BM_GPC_PGC_ACK_SEL_A7_PU_DUMMY_ACK :
|
|
BM_GPC_PGC_ACK_SEL_A7_PD_DUMMY_ACK);
|
|
val |= 1 << (m_core + (mode ? 16 : 0));
|
|
writel(val, GPC_IPS_BASE_ADDR + GPC_PGC_ACK_SEL_A7);
|
|
}
|
|
}
|
|
|
|
static __secure void imx_system_counter_resume(void)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(SYSCNT_CTRL_IPS_BASE_ADDR);
|
|
val &= ~BM_SYS_COUNTER_CNTCR_FCR1;
|
|
val |= BM_SYS_COUNTER_CNTCR_FCR0;
|
|
writel(val, SYSCNT_CTRL_IPS_BASE_ADDR);
|
|
}
|
|
|
|
static __secure void imx_system_counter_suspend(void)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(SYSCNT_CTRL_IPS_BASE_ADDR);
|
|
val &= ~BM_SYS_COUNTER_CNTCR_FCR0;
|
|
val |= BM_SYS_COUNTER_CNTCR_FCR1;
|
|
writel(val, SYSCNT_CTRL_IPS_BASE_ADDR);
|
|
}
|
|
|
|
static __secure void gic_resume(void)
|
|
{
|
|
u32 itlinesnr, i;
|
|
u32 gic_dist_addr = GIC400_ARB_BASE_ADDR + GIC_DIST_OFFSET;
|
|
|
|
/* enable the GIC distributor */
|
|
writel(readl(gic_dist_addr + GICD_CTLR) | 0x03,
|
|
gic_dist_addr + GICD_CTLR);
|
|
|
|
/* TYPER[4:0] contains an encoded number of available interrupts */
|
|
itlinesnr = readl(gic_dist_addr + GICD_TYPER) & 0x1f;
|
|
|
|
/* set all bits in the GIC group registers to one to allow access
|
|
* from non-secure state. The first 32 interrupts are private per
|
|
* CPU and will be set later when enabling the GIC for each core
|
|
*/
|
|
for (i = 1; i <= itlinesnr; i++)
|
|
writel((u32)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
|
|
}
|
|
|
|
static inline void imx_pll_suspend(void)
|
|
{
|
|
writel(BM_ANATOP_ARM_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_ARM_PLL + REG_SET);
|
|
writel(BM_ANATOP_DDR_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_DDR_PLL + REG_SET);
|
|
writel(BM_ANATOP_SYS_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_SYS_PLL + REG_SET);
|
|
writel(BM_ANATOP_ENET_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_ENET_PLL + REG_SET);
|
|
writel(BM_ANATOP_AUDIO_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_AUDIO_PLL + REG_SET);
|
|
writel(BM_ANATOP_VIDEO_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_VIDEO_PLL + REG_SET);
|
|
}
|
|
|
|
static inline void imx_pll_resume(void)
|
|
{
|
|
writel(BM_ANATOP_ARM_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_ARM_PLL + REG_CLR);
|
|
writel(BM_ANATOP_DDR_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_DDR_PLL + REG_CLR);
|
|
writel(BM_ANATOP_SYS_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_SYS_PLL + REG_CLR);
|
|
writel(BM_ANATOP_ENET_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_ENET_PLL + REG_CLR);
|
|
writel(BM_ANATOP_AUDIO_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_AUDIO_PLL + REG_CLR);
|
|
writel(BM_ANATOP_VIDEO_PLL_OVERRIDE,
|
|
ANATOP_BASE_ADDR + ANADIG_VIDEO_PLL + REG_CLR);
|
|
}
|
|
|
|
static inline void imx_udelay(u32 usec)
|
|
{
|
|
u32 freq;
|
|
u64 start, end;
|
|
|
|
asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
|
|
asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (start));
|
|
do {
|
|
asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (end));
|
|
if ((end - start) > usec * (freq / 1000000))
|
|
break;
|
|
} while (1);
|
|
}
|
|
|
|
static inline void imx_ddrc_enter_self_refresh(void)
|
|
{
|
|
writel(0, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
|
|
while (readl(DDRC_IPS_BASE_ADDR + DDRC_PSTAT) & 0x10001)
|
|
;
|
|
|
|
writel(0x20, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
|
|
while ((readl(DDRC_IPS_BASE_ADDR + DDRC_STAT) & 0x23) != 0x23)
|
|
;
|
|
writel(readl(DDRC_IPS_BASE_ADDR + DDRC_PWRCTL) | 0x8,
|
|
DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
|
|
}
|
|
|
|
static inline void imx_ddrc_exit_self_refresh(void)
|
|
{
|
|
writel(0, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
|
|
while ((readl(DDRC_IPS_BASE_ADDR + DDRC_STAT) & 0x3) == 0x3)
|
|
;
|
|
writel(readl(DDRC_IPS_BASE_ADDR + DDRC_PWRCTL) | 0x1,
|
|
DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
|
|
}
|
|
|
|
__secure void imx_system_resume(void)
|
|
{
|
|
unsigned int i, val, imr[4], entry;
|
|
|
|
entry = psci_get_target_pc(0);
|
|
imx_ddrc_exit_self_refresh();
|
|
imx_system_counter_resume();
|
|
imx_gpcv2_set_lpm_mode(RUN);
|
|
imx_gpcv2_set_cpu_power_gate_by_lpm(0, false);
|
|
imx_gpcv2_set_plat_power_gate_by_lpm(false);
|
|
imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C0);
|
|
imx_gpcv2_set_m_core_pgc(false, GPC_PGC_SCU);
|
|
|
|
/*
|
|
* need to mask all interrupts in GPC before
|
|
* operating RBC configurations
|
|
*/
|
|
for (i = 0; i < 4; i++) {
|
|
imr[i] = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
|
|
writel(~0, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
|
|
}
|
|
|
|
/* configure RBC enable bit */
|
|
val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
val &= ~BM_SLPCR_RBC_EN;
|
|
writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
|
|
/* configure RBC count */
|
|
val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
val &= ~BM_SLPCR_REG_BYPASS_COUNT;
|
|
writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
|
|
/*
|
|
* need to delay at least 2 cycles of CKIL(32K)
|
|
* due to hardware design requirement, which is
|
|
* ~61us, here we use 65us for safe
|
|
*/
|
|
imx_udelay(65);
|
|
|
|
/* restore GPC interrupt mask settings */
|
|
for (i = 0; i < 4; i++)
|
|
writel(imr[i], GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
|
|
|
|
/* initialize gic distributor */
|
|
gic_resume();
|
|
_nonsec_init();
|
|
|
|
/* save cpu0 entry */
|
|
psci_save(0, entry, 0);
|
|
psci_cpu_entry();
|
|
}
|
|
|
|
__secure void psci_system_suspend(u32 __always_unused function_id,
|
|
u32 ep, u32 context_id)
|
|
{
|
|
u32 gpc_mask[4];
|
|
u32 i, val;
|
|
|
|
psci_save(0, ep, context_id);
|
|
/* overwrite PLL to be controlled by low power mode */
|
|
imx_pll_suspend();
|
|
imx_system_counter_suspend();
|
|
/* set CA7 platform to enter STOP mode */
|
|
imx_gpcv2_set_lpm_mode(STOP);
|
|
/* enable core0/scu power down/up with low power mode */
|
|
imx_gpcv2_set_cpu_power_gate_by_lpm(0, true);
|
|
imx_gpcv2_set_plat_power_gate_by_lpm(true);
|
|
/* time slot settings for core0 and scu */
|
|
imx_gpcv2_set_slot_ack(0, CORE0_A7, false, false);
|
|
imx_gpcv2_set_slot_ack(1, SCU_A7, false, true);
|
|
imx_gpcv2_set_slot_ack(5, SCU_A7, true, false);
|
|
imx_gpcv2_set_slot_ack(6, CORE0_A7, true, true);
|
|
imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C0);
|
|
imx_gpcv2_set_m_core_pgc(true, GPC_PGC_SCU);
|
|
psci_v7_flush_dcache_all();
|
|
|
|
imx_ddrc_enter_self_refresh();
|
|
|
|
/*
|
|
* e10133: ARM: Boot failure after A7 enters into
|
|
* low-power idle mode
|
|
*
|
|
* Workaround:
|
|
* If both CPU0/CPU1 are IDLE, the last IDLE CPU should
|
|
* disable GIC first, then REG_BYPASS_COUNTER is used
|
|
* to mask wakeup INT, and then execute “wfi” is used to
|
|
* bring the system into power down processing safely.
|
|
* The counter must be enabled as close to the “wfi” state
|
|
* as possible. The following equation can be used to
|
|
* determine the RBC counter value:
|
|
* RBC_COUNT * (1/32K RTC frequency) >=
|
|
* (46 + PDNSCR_SW + PDNSCR_SW2ISO ) ( 1/IPG_CLK frequency ).
|
|
*/
|
|
|
|
/* disable GIC distributor */
|
|
writel(0, GIC400_ARB_BASE_ADDR + GIC_DIST_OFFSET);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
gpc_mask[i] = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
|
|
writel(~0, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
|
|
}
|
|
|
|
/*
|
|
* enable the RBC bypass counter here
|
|
* to hold off the interrupts. RBC counter
|
|
* = 8 (240us). With this setting, the latency
|
|
* from wakeup interrupt to ARM power up
|
|
* is ~250uS.
|
|
*/
|
|
val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
val &= ~(0x3f << 24);
|
|
val |= (0x8 << 24);
|
|
writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
|
|
/* enable the counter. */
|
|
val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
val |= (1 << 30);
|
|
writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
|
|
|
|
/* unmask all the GPC interrupts. */
|
|
for (i = 0; i < 4; i++)
|
|
writel(gpc_mask[i], GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
|
|
|
|
/*
|
|
* now delay for a short while (~3usec)
|
|
* ARM is at 1GHz at this point
|
|
* so a short loop should be enough.
|
|
* this delay is required to ensure that
|
|
* the RBC counter can start counting in
|
|
* case an interrupt is already pending
|
|
* or in case an interrupt arrives just
|
|
* as ARM is about to assert DSM_request.
|
|
*/
|
|
for (i = 0; i < 2000; i++)
|
|
asm volatile("");
|
|
|
|
/* save resume entry and sp in CPU0 GPR registers */
|
|
asm volatile("mov %0, sp" : "=r" (val));
|
|
writel((u32)psci_system_resume, SRC_BASE_ADDR + SRC_GPR1_MX7D);
|
|
writel(val, SRC_BASE_ADDR + SRC_GPR2_MX7D);
|
|
|
|
/* sleep */
|
|
while (1)
|
|
wfi();
|
|
}
|