mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
40ee163cc4
SRAM address used for bootcount on exiting code is erasing
previous count value when system reset from Linux. So use
the dedicated imx6 scratch register, GPR2 to preserve the
contents even if the system reset from Linux.
Fixes: 4eb9aa3935 ("configs: imx6qdl_icore_mmc: Enable watchdog and bootcounter")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
71 lines
1.7 KiB
Text
71 lines
1.7 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_MX6=y
|
|
CONFIG_SYS_TEXT_BASE=0x17800000
|
|
CONFIG_SPL_GPIO_SUPPORT=y
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
|
CONFIG_TARGET_MX6Q_ENGICAM=y
|
|
CONFIG_SPL_SERIAL_SUPPORT=y
|
|
CONFIG_SPL=y
|
|
CONFIG_DEBUG_UART_BASE=0x021f0000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_SPL_LIBDISK_SUPPORT=y
|
|
# CONFIG_CMD_BMODE is not set
|
|
CONFIG_CMD_BOOTCOUNT=y
|
|
CONFIG_BOOTCOUNT_LIMIT=y
|
|
CONFIG_BOOTCOUNT_BOOTLIMIT=3
|
|
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
|
|
CONFIG_SYS_BOOTCOUNT_ADDR=0x020D8024
|
|
CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041
|
|
CONFIG_IMX_WATCHDOG=y
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_SIGNATURE=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
CONFIG_IMAGE_FORMAT_LEGACY=y
|
|
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_SUPPORT_RAW_INITRD=y
|
|
CONFIG_BOUNCE_BUFFER=y
|
|
CONFIG_SPL_OS_BOOT=y
|
|
CONFIG_SPL_WATCHDOG_SUPPORT=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_SYS_PROMPT="icorem6qdl> "
|
|
CONFIG_CRC32_VERIFY=y
|
|
CONFIG_CMD_MEMTEST=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)"
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
|
|
CONFIG_OF_LIST="imx6q-icore imx6dl-icore"
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_SYS_I2C_MXC=y
|
|
CONFIG_FSL_ESDHC=y
|
|
CONFIG_NAND=y
|
|
CONFIG_NAND_MXS=y
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_SMSC=y
|
|
CONFIG_FEC_MXC=y
|
|
CONFIG_MII=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_IMX6=y
|
|
CONFIG_DEBUG_UART_MXC=y
|
|
CONFIG_MXC_UART=y
|
|
CONFIG_IMX_THERMAL=y
|
|
CONFIG_VIDEO=y
|
|
CONFIG_VIDEO_IPUV3=y
|