mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
3f7a725598
Since the 'clock-freq-min-max' is deprecated, we use max-frequency. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
441 lines
10 KiB
Text
441 lines
10 KiB
Text
/*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/clock/rk3036-cru.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "rockchip,rk3036";
|
|
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
gpio2 = &gpio2;
|
|
i2c1 = &i2c1;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
mmc0 = &emmc;
|
|
mmc1 = &sdmmc;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x60000000 0x40000000>;
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "rockchip,rk3036-smp";
|
|
|
|
cpu0: cpu@f00 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0xf00>;
|
|
operating-points = <
|
|
/* KHz uV */
|
|
816000 1000000
|
|
>;
|
|
#cooling-cells = <2>; /* min followed by max */
|
|
clock-latency = <40000>;
|
|
clocks = <&cru ARMCLK>;
|
|
resets = <&cru SRST_CORE0>;
|
|
};
|
|
cpu1: cpu@f01 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0xf01>;
|
|
resets = <&cru SRST_CORE1>;
|
|
};
|
|
};
|
|
|
|
amba {
|
|
compatible = "arm,amba-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pdma: pdma@20078000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x20078000 0x4000>;
|
|
arm,pl330-broken-no-flushp;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
clocks = <&cru ACLK_DMAC2>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
};
|
|
|
|
xin24m: oscillator {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "xin24m";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
arm,cpu-registers-not-fw-configured;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
cru: clock-controller@20000000 {
|
|
compatible = "rockchip,rk3036-cru";
|
|
reg = <0x20000000 0x1000>;
|
|
rockchip,grf = <&grf>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
assigned-clocks = <&cru PLL_GPLL>;
|
|
assigned-clock-rates = <594000000>;
|
|
};
|
|
|
|
uart0: serial@20060000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20060000 0x100>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
};
|
|
|
|
uart1: serial@20064000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20064000 0x100>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_xfer>;
|
|
};
|
|
|
|
uart2: serial@20068000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20068000 0x100>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_xfer>;
|
|
};
|
|
|
|
pwm0: pwm@20050000 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050000 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm0_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@20050010 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050010 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm1_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@20050020 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050020 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm2_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@20050030 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050030 0x10>;
|
|
#pwm-cells = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm3_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
sram: sram@10080000 {
|
|
compatible = "rockchip,rk3036-smp-sram", "mmio-sram";
|
|
reg = <0x10080000 0x2000>;
|
|
};
|
|
|
|
gic: interrupt-controller@10139000 {
|
|
compatible = "arm,gic-400";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
|
|
reg = <0x10139000 0x1000>,
|
|
<0x1013a000 0x1000>,
|
|
<0x1013c000 0x2000>,
|
|
<0x1013e000 0x2000>;
|
|
interrupts = <GIC_PPI 9 0xf04>;
|
|
};
|
|
|
|
grf: syscon@20008000 {
|
|
compatible = "rockchip,rk3036-grf", "syscon";
|
|
reg = <0x20008000 0x1000>;
|
|
};
|
|
|
|
usb_otg: usb@10180000 {
|
|
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
|
"snps,dwc2";
|
|
reg = <0x10180000 0x40000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG0>;
|
|
clock-names = "otg";
|
|
dr_mode = "otg";
|
|
g-np-tx-fifo-size = <16>;
|
|
g-rx-fifo-size = <275>;
|
|
g-tx-fifo-size = <256 128 128 64 64 32>;
|
|
g-use-dma;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_host: usb@101c0000 {
|
|
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
|
"snps,dwc2";
|
|
reg = <0x101c0000 0x40000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG1>;
|
|
clock-names = "otg";
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
emmc: dwmmc@1021c000 {
|
|
compatible = "rockchip,rk3288-dw-mshc";
|
|
clock-frequency = <37500000>;
|
|
max-frequency = <37500000>;
|
|
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
|
|
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
|
|
dmas = <&pdma 12>;
|
|
dma-names = "rx-tx";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1021c000 0x4000>;
|
|
broken-cd;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-ddr-1_8v;
|
|
disable-wp;
|
|
fifo-mode;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
default-sample-phase = <158>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
};
|
|
|
|
sdmmc: dwmmc@10214000 {
|
|
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
|
|
reg = <0x10214000 0x4000>;
|
|
clock-frequency = <37500000>;
|
|
max-frequency = <37500000>;
|
|
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "rockchip,rk3036-pinctrl";
|
|
rockchip,grf = <&grf>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpio0: gpio0@2007c000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x2007c000 0x100>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO0>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio1: gpio1@20080000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x20080000 0x100>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO1>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio2@20084000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x20084000 0x100>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO2>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pcfg_pull_up: pcfg-pull-up {
|
|
bias-pull-up;
|
|
};
|
|
|
|
pcfg_pull_down: pcfg-pull-down {
|
|
bias-pull-down;
|
|
};
|
|
|
|
pcfg_pull_none: pcfg-pull-none {
|
|
bias-disable;
|
|
};
|
|
|
|
emmc {
|
|
/*
|
|
* We run eMMC at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
emmc_clk: emmc-clk {
|
|
rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_cmd: emmc-cmd {
|
|
rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_bus8: emmc-bus8 {
|
|
rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 25 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 26 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 27 RK_FUNC_2 &pcfg_pull_none>;
|
|
/*
|
|
<1 28 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 29 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 30 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 31 RK_FUNC_2 &pcfg_pull_up>;
|
|
*/
|
|
};
|
|
};
|
|
|
|
uart0 {
|
|
uart0_xfer: uart0-xfer {
|
|
rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
|
|
<0 17 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_cts: uart0-cts {
|
|
rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_rts: uart0-rts {
|
|
rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart1 {
|
|
uart1_xfer: uart1-xfer {
|
|
rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
|
|
<2 23 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
/* no rts / cts for uart1 */
|
|
};
|
|
|
|
uart2 {
|
|
uart2_xfer: uart2-xfer {
|
|
rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 19 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
/* no rts / cts for uart2 */
|
|
};
|
|
|
|
pwm0 {
|
|
pwm0_pin: pwm0-pin {
|
|
rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm1 {
|
|
pwm1_pin: pwm1-pin {
|
|
rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm2 {
|
|
pwm2_pin: pwm2-pin {
|
|
rockchip,pins = <0 1 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm3 {
|
|
pwm3_pin: pwm3-pin {
|
|
rockchip,pins = <0 27 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c1 {
|
|
i2c1_xfer: i2c1-xfer {
|
|
rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
|
|
<0 3 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c1: i2c@20056000 {
|
|
compatible = "rockchip,rk3288-i2c";
|
|
reg = <0x20056000 0x1000>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "i2c";
|
|
clocks = <&cru PCLK_I2C1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_xfer>;
|
|
status = "disabled";
|
|
};
|
|
};
|