mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-18 01:03:05 +00:00
26e8ebcd7c
mpc8xx, mpc83xx and mpc86xx have similar watchdog with almost same memory registers. Refactor the driver to get the register addresses from the device tree and use the compatible to know the prescale factor. Calculate the watchdog setup value from the provided timeout. Don't declare it anymore as an HW_WATCHDOG, u-boot will start servicing the watchdog early enough. On mpc8xx the watchdog configuration register is also used for configuring the bus monitor. So add it as an option to the watchdog when it is mpc8xx. When watchdog is not selected, leave the configuration of the initial SYPCR from Kconfig. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
91 lines
1.5 KiB
Text
91 lines
1.5 KiB
Text
menu "mpc8xx CPU"
|
|
depends on MPC8xx
|
|
|
|
config SYS_CPU
|
|
default "mpc8xx"
|
|
|
|
choice
|
|
prompt "Target select"
|
|
optional
|
|
|
|
config TARGET_MCR3000
|
|
bool "Support MCR3000 board from CSSI"
|
|
|
|
config TARGET_CMPC885
|
|
bool "Support CMPC885 board from CSSI"
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "CPU select"
|
|
default MPC866
|
|
|
|
config MPC866
|
|
bool "MPC866"
|
|
select SYS_CACHE_SHIFT_4
|
|
|
|
config MPC885
|
|
bool "MPC885"
|
|
select SYS_CACHE_SHIFT_4
|
|
|
|
endchoice
|
|
|
|
comment "Specific commands"
|
|
|
|
config CMD_IMMAP
|
|
bool "Enable various commands to dump IMMR information"
|
|
help
|
|
This enables various commands such as:
|
|
|
|
siuinfo - print System Interface Unit (SIU) registers
|
|
memcinfo - print Memory Controller registers
|
|
|
|
comment "Configuration Registers"
|
|
|
|
config SYS_SIUMCR
|
|
hex "SIUMCR register"
|
|
help
|
|
SIU Module Configuration (11-6)
|
|
|
|
config SYS_SYPCR
|
|
hex "SYPCR register" if !WDT_MPC8xxx
|
|
default 0
|
|
help
|
|
System Protection Control (11-9)
|
|
|
|
config SYS_TBSCR
|
|
hex "TBSCR register"
|
|
help
|
|
Time Base Status and Control (11-26)
|
|
|
|
config SYS_PISCR
|
|
hex "PISCR register"
|
|
help
|
|
Periodic Interrupt Status and Control (11-31)
|
|
|
|
config SYS_PLPRCR_BOOL
|
|
bool "Customise PLPRCR"
|
|
|
|
config SYS_PLPRCR
|
|
hex "PLPRCR register"
|
|
depends on SYS_PLPRCR_BOOL
|
|
help
|
|
PLL, Low-Power, and Reset Control Register (15-30)
|
|
|
|
config SYS_SCCR
|
|
hex "SCCR register"
|
|
help
|
|
System Clock and reset Control Register (15-27)
|
|
|
|
config SYS_SCCR_MASK
|
|
hex "MASK for setting SCCR register"
|
|
|
|
config SYS_DER
|
|
hex "DER register"
|
|
help
|
|
Debug Event Register (37-47)
|
|
|
|
source "board/cssi/mcr3000/Kconfig"
|
|
|
|
source "board/cssi/cmpc885/Kconfig"
|
|
endmenu
|