mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
ba932bc846
Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach, which is a cheap development platform with RZ/A1H SoC. The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Currently supported are UART, ethernet and RPC SPI. The board can be booted from RPC SPI by writing the u-boot.bin binary to the beginning of the SPI NOR, e.g. using the "sf" command. The board can also be booted via JTAG by setting text base to 0x20020000, loading u-boot.bin there via JTAG and executing it from that address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
107 lines
2.8 KiB
ArmAsm
107 lines
2.8 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2017 Renesas Electronics
|
|
* Copyright (C) 2017 Chris Brandt
|
|
*/
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/macro.h>
|
|
|
|
/* Watchdog Registers */
|
|
#define RZA1_WDT_BASE 0xFCFE0000
|
|
#define WTCSR (RZA1_WDT_BASE + 0x00) /* Watchdog Timer Control Register */
|
|
#define WTCNT (RZA1_WDT_BASE + 0x02) /* Watchdog Timer Counter Register */
|
|
#define WRCSR (RZA1_WDT_BASE + 0x04) /* Watchdog Reset Control Register */
|
|
|
|
/* Standby controller registers (chapter 55) */
|
|
#define RZA1_STBCR_BASE 0xFCFE0020
|
|
#define STBCR1 (RZA1_STBCR_BASE + 0x00)
|
|
#define STBCR2 (RZA1_STBCR_BASE + 0x04)
|
|
#define STBCR3 (RZA1_STBCR_BASE + 0x400)
|
|
#define STBCR4 (RZA1_STBCR_BASE + 0x404)
|
|
#define STBCR5 (RZA1_STBCR_BASE + 0x408)
|
|
#define STBCR6 (RZA1_STBCR_BASE + 0x40c)
|
|
#define STBCR7 (RZA1_STBCR_BASE + 0x410)
|
|
#define STBCR8 (RZA1_STBCR_BASE + 0x414)
|
|
#define STBCR9 (RZA1_STBCR_BASE + 0x418)
|
|
#define STBCR10 (RZA1_STBCR_BASE + 0x41c)
|
|
#define STBCR11 (RZA1_STBCR_BASE + 0x420)
|
|
#define STBCR12 (RZA1_STBCR_BASE + 0x424)
|
|
#define STBCR13 (RZA1_STBCR_BASE + 0x450)
|
|
|
|
/* Clock Registers */
|
|
#define RZA1_FRQCR_BASE 0xFCFE0010
|
|
#define FRQCR (RZA1_FRQCR_BASE + 0x00)
|
|
#define FRQCR2 (RZA1_FRQCR_BASE + 0x04)
|
|
|
|
#define SYSCR1 0xFCFE0400 /* System control register 1 */
|
|
#define SYSCR2 0xFCFE0404 /* System control register 2 */
|
|
#define SYSCR3 0xFCFE0408 /* System control register 3 */
|
|
|
|
/* Disable WDT */
|
|
#define WTCSR_D 0xA518
|
|
#define WTCNT_D 0x5A00
|
|
|
|
/* Enable all peripheral clocks */
|
|
#define STBCR3_D 0x00000000
|
|
#define STBCR4_D 0x00000000
|
|
#define STBCR5_D 0x00000000
|
|
#define STBCR6_D 0x00000000
|
|
#define STBCR7_D 0x00000024
|
|
#define STBCR8_D 0x00000005
|
|
#define STBCR9_D 0x00000000
|
|
#define STBCR10_D 0x00000000
|
|
#define STBCR11_D 0x000000c0
|
|
#define STBCR12_D 0x000000f0
|
|
|
|
/*
|
|
* Set all system clocks to full speed.
|
|
* On reset, the CPU will be running at 1/2 speed.
|
|
* In the Hardware Manual, see Table 6.3 Settable Frequency Ranges
|
|
*/
|
|
#define FRQCR_D 0x0035
|
|
#define FRQCR2_D 0x0001
|
|
|
|
.global lowlevel_init
|
|
|
|
.text
|
|
.align 2
|
|
|
|
lowlevel_init:
|
|
/* PL310 init */
|
|
write32 0x3fffff80, 0x00000001
|
|
|
|
/* Disable WDT */
|
|
write16 WTCSR, WTCSR_D
|
|
write16 WTCNT, WTCNT_D
|
|
|
|
/* Set clocks */
|
|
write16 FRQCR, FRQCR_D
|
|
write16 FRQCR2, FRQCR2_D
|
|
|
|
/* Enable all peripherals(Standby Control) */
|
|
write8 STBCR3, STBCR3_D
|
|
write8 STBCR4, STBCR4_D
|
|
write8 STBCR5, STBCR5_D
|
|
write8 STBCR6, STBCR6_D
|
|
write8 STBCR7, STBCR7_D
|
|
write8 STBCR8, STBCR8_D
|
|
write8 STBCR9, STBCR9_D
|
|
write8 STBCR10, STBCR10_D
|
|
write8 STBCR11, STBCR11_D
|
|
write8 STBCR12, STBCR12_D
|
|
|
|
/* For serial booting, enable read ahead caching to speed things up */
|
|
#define DRCR_0 0x3FEFA00C
|
|
write32 DRCR_0, 0x00010100 /* Read Burst ON, Length=2 */
|
|
|
|
/* Enable all internal RAM */
|
|
write8 SYSCR1, 0xFF
|
|
write8 SYSCR2, 0xFF
|
|
write8 SYSCR3, 0xFF
|
|
|
|
nop
|
|
/* back to arch calling code */
|
|
mov pc, lr
|
|
|
|
.align 4
|