mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
df8395a01f
ep0.c also need to include dm.h so dev_xxx can access udevice fields. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
920 lines
23 KiB
C
920 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Cadence USBSS DRD Driver - gadget side.
|
|
*
|
|
* Copyright (C) 2018 Cadence Design Systems.
|
|
* Copyright (C) 2017-2018 NXP
|
|
*
|
|
* Authors: Pawel Jez <pjez@cadence.com>,
|
|
* Pawel Laszczak <pawell@cadence.com>
|
|
* Peter Chen <peter.chen@nxp.com>
|
|
*/
|
|
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <asm/cache.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb/composite.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#include "gadget.h"
|
|
#include "trace.h"
|
|
|
|
#define readl_poll_timeout_atomic readl_poll_timeout
|
|
#define usleep_range(a, b) udelay((b))
|
|
|
|
static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
|
|
};
|
|
|
|
/**
|
|
* cdns3_ep0_run_transfer - Do transfer on default endpoint hardware
|
|
* @priv_dev: extended gadget object
|
|
* @dma_addr: physical address where data is/will be stored
|
|
* @length: data length
|
|
* @erdy: set it to 1 when ERDY packet should be sent -
|
|
* exit from flow control state
|
|
*/
|
|
static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev,
|
|
dma_addr_t dma_addr,
|
|
unsigned int length, int erdy, int zlp)
|
|
{
|
|
struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
|
|
struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
|
|
|
|
priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr);
|
|
priv_ep->trb_pool[0].length = TRB_LEN(length);
|
|
|
|
if (zlp) {
|
|
priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL);
|
|
priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr);
|
|
priv_ep->trb_pool[1].length = TRB_LEN(0);
|
|
priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC |
|
|
TRB_TYPE(TRB_NORMAL);
|
|
} else {
|
|
priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC |
|
|
TRB_TYPE(TRB_NORMAL);
|
|
priv_ep->trb_pool[1].control = 0;
|
|
}
|
|
|
|
/* Flush both TRBs */
|
|
flush_dcache_range((unsigned long)priv_ep->trb_pool,
|
|
(unsigned long)priv_ep->trb_pool +
|
|
ROUND(sizeof(struct cdns3_trb) * 2,
|
|
CONFIG_SYS_CACHELINE_SIZE));
|
|
|
|
trace_cdns3_prepare_trb(priv_ep, priv_ep->trb_pool);
|
|
|
|
cdns3_select_ep(priv_dev, priv_dev->ep0_data_dir);
|
|
|
|
writel(EP_STS_TRBERR, ®s->ep_sts);
|
|
writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), ®s->ep_traddr);
|
|
trace_cdns3_doorbell_ep0(priv_dev->ep0_data_dir ? "ep0in" : "ep0out",
|
|
readl(®s->ep_traddr));
|
|
|
|
/* TRB should be prepared before starting transfer. */
|
|
writel(EP_CMD_DRDY, ®s->ep_cmd);
|
|
|
|
/* Resume controller before arming transfer. */
|
|
__cdns3_gadget_wakeup(priv_dev);
|
|
|
|
if (erdy)
|
|
writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd);
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep0_delegate_req - Returns status of handling setup packet
|
|
* Setup is handled by gadget driver
|
|
* @priv_dev: extended gadget object
|
|
* @ctrl_req: pointer to received setup packet
|
|
*
|
|
* Returns zero on success or negative value on failure
|
|
*/
|
|
static int cdns3_ep0_delegate_req(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl_req)
|
|
{
|
|
int ret;
|
|
|
|
spin_unlock(&priv_dev->lock);
|
|
priv_dev->setup_pending = 1;
|
|
ret = priv_dev->gadget_driver->setup(&priv_dev->gadget, ctrl_req);
|
|
priv_dev->setup_pending = 0;
|
|
spin_lock(&priv_dev->lock);
|
|
return ret;
|
|
}
|
|
|
|
static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev)
|
|
{
|
|
priv_dev->ep0_data_dir = 0;
|
|
priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
|
|
cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
|
|
sizeof(struct usb_ctrlrequest), 0, 0);
|
|
}
|
|
|
|
static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev,
|
|
u8 send_stall, u8 send_erdy)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
|
|
struct usb_request *request;
|
|
|
|
request = cdns3_next_request(&priv_ep->pending_req_list);
|
|
if (request)
|
|
list_del_init(&request->list);
|
|
|
|
if (send_stall) {
|
|
trace_cdns3_halt(priv_ep, send_stall, 0);
|
|
/* set_stall on ep0 */
|
|
cdns3_select_ep(priv_dev, 0x00);
|
|
writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd);
|
|
} else {
|
|
cdns3_prepare_setup_packet(priv_dev);
|
|
}
|
|
|
|
priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
|
|
writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL,
|
|
&priv_dev->regs->ep_cmd);
|
|
|
|
cdns3_allow_enable_l1(priv_dev, 1);
|
|
}
|
|
|
|
/**
|
|
* cdns3_req_ep0_set_configuration - Handling of SET_CONFIG standard USB request
|
|
* @priv_dev: extended gadget object
|
|
* @ctrl_req: pointer to received setup packet
|
|
*
|
|
* Returns 0 if success, USB_GADGET_DELAYED_STATUS on deferred status stage,
|
|
* error code on error
|
|
*/
|
|
static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl_req)
|
|
{
|
|
enum usb_device_state device_state = priv_dev->gadget.state;
|
|
struct cdns3_endpoint *priv_ep;
|
|
u32 config = le16_to_cpu(ctrl_req->wValue);
|
|
int result = 0;
|
|
int i;
|
|
|
|
switch (device_state) {
|
|
case USB_STATE_ADDRESS:
|
|
/* Configure non-control EPs */
|
|
for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
|
|
priv_ep = priv_dev->eps[i];
|
|
if (!priv_ep)
|
|
continue;
|
|
|
|
if (priv_ep->flags & EP_CLAIMED)
|
|
cdns3_ep_config(priv_ep);
|
|
}
|
|
|
|
result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
|
|
|
|
if (result)
|
|
return result;
|
|
|
|
if (config) {
|
|
cdns3_set_hw_configuration(priv_dev);
|
|
} else {
|
|
cdns3_hw_reset_eps_config(priv_dev);
|
|
usb_gadget_set_state(&priv_dev->gadget,
|
|
USB_STATE_ADDRESS);
|
|
}
|
|
break;
|
|
case USB_STATE_CONFIGURED:
|
|
result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
|
|
|
|
if (!config && !result) {
|
|
cdns3_hw_reset_eps_config(priv_dev);
|
|
usb_gadget_set_state(&priv_dev->gadget,
|
|
USB_STATE_ADDRESS);
|
|
}
|
|
break;
|
|
default:
|
|
result = -EINVAL;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* cdns3_req_ep0_set_address - Handling of SET_ADDRESS standard USB request
|
|
* @priv_dev: extended gadget object
|
|
* @ctrl_req: pointer to received setup packet
|
|
*
|
|
* Returns 0 if success, error code on error
|
|
*/
|
|
static int cdns3_req_ep0_set_address(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl_req)
|
|
{
|
|
enum usb_device_state device_state = priv_dev->gadget.state;
|
|
u32 reg;
|
|
u32 addr;
|
|
|
|
addr = le16_to_cpu(ctrl_req->wValue);
|
|
|
|
if (addr > USB_DEVICE_MAX_ADDRESS) {
|
|
dev_err(priv_dev->dev,
|
|
"Device address (%d) cannot be greater than %d\n",
|
|
addr, USB_DEVICE_MAX_ADDRESS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (device_state == USB_STATE_CONFIGURED) {
|
|
dev_err(priv_dev->dev,
|
|
"can't set_address from configured state\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = readl(&priv_dev->regs->usb_cmd);
|
|
|
|
writel(reg | USB_CMD_FADDR(addr) | USB_CMD_SET_ADDR,
|
|
&priv_dev->regs->usb_cmd);
|
|
|
|
usb_gadget_set_state(&priv_dev->gadget,
|
|
(addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_req_ep0_get_status - Handling of GET_STATUS standard USB request
|
|
* @priv_dev: extended gadget object
|
|
* @ctrl_req: pointer to received setup packet
|
|
*
|
|
* Returns 0 if success, error code on error
|
|
*/
|
|
static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl)
|
|
{
|
|
__le16 *response_pkt;
|
|
u16 usb_status = 0;
|
|
u32 recip;
|
|
|
|
recip = ctrl->bRequestType & USB_RECIP_MASK;
|
|
|
|
switch (recip) {
|
|
case USB_RECIP_DEVICE:
|
|
/* self powered */
|
|
if (priv_dev->is_selfpowered)
|
|
usb_status = BIT(USB_DEVICE_SELF_POWERED);
|
|
|
|
if (priv_dev->wake_up_flag)
|
|
usb_status |= BIT(USB_DEVICE_REMOTE_WAKEUP);
|
|
|
|
if (priv_dev->gadget.speed != USB_SPEED_SUPER)
|
|
break;
|
|
|
|
if (priv_dev->u1_allowed)
|
|
usb_status |= BIT(USB_DEV_STAT_U1_ENABLED);
|
|
|
|
if (priv_dev->u2_allowed)
|
|
usb_status |= BIT(USB_DEV_STAT_U2_ENABLED);
|
|
|
|
break;
|
|
case USB_RECIP_INTERFACE:
|
|
return cdns3_ep0_delegate_req(priv_dev, ctrl);
|
|
case USB_RECIP_ENDPOINT:
|
|
/* check if endpoint is stalled */
|
|
cdns3_select_ep(priv_dev, ctrl->wIndex);
|
|
if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)))
|
|
usb_status = BIT(USB_ENDPOINT_HALT);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
response_pkt = (__le16 *)priv_dev->setup_buf;
|
|
*response_pkt = cpu_to_le16(usb_status);
|
|
|
|
/* Flush setup response */
|
|
flush_dcache_range((unsigned long)priv_dev->setup_buf,
|
|
(unsigned long)priv_dev->setup_buf +
|
|
ROUND(sizeof(struct usb_ctrlrequest),
|
|
CONFIG_SYS_CACHELINE_SIZE));
|
|
|
|
cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
|
|
sizeof(*response_pkt), 1, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl,
|
|
int set)
|
|
{
|
|
enum usb_device_state state;
|
|
enum usb_device_speed speed;
|
|
int ret = 0;
|
|
u16 tmode;
|
|
|
|
state = priv_dev->gadget.state;
|
|
speed = priv_dev->gadget.speed;
|
|
|
|
switch (ctrl->wValue) {
|
|
case USB_DEVICE_REMOTE_WAKEUP:
|
|
priv_dev->wake_up_flag = !!set;
|
|
break;
|
|
case USB_DEVICE_U1_ENABLE:
|
|
if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
|
|
return -EINVAL;
|
|
|
|
priv_dev->u1_allowed = !!set;
|
|
break;
|
|
case USB_DEVICE_U2_ENABLE:
|
|
if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
|
|
return -EINVAL;
|
|
|
|
priv_dev->u2_allowed = !!set;
|
|
break;
|
|
case USB_DEVICE_LTM_ENABLE:
|
|
ret = -EINVAL;
|
|
break;
|
|
case USB_DEVICE_TEST_MODE:
|
|
if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH)
|
|
return -EINVAL;
|
|
|
|
tmode = le16_to_cpu(ctrl->wIndex);
|
|
|
|
if (!set || (tmode & 0xff) != 0)
|
|
return -EINVAL;
|
|
|
|
switch (tmode >> 8) {
|
|
case TEST_J:
|
|
case TEST_K:
|
|
case TEST_SE0_NAK:
|
|
case TEST_PACKET:
|
|
cdns3_ep0_complete_setup(priv_dev, 0, 1);
|
|
/**
|
|
* Little delay to give the controller some time
|
|
* for sending status stage.
|
|
* This time should be less then 3ms.
|
|
*/
|
|
usleep_range(1000, 2000);
|
|
cdns3_set_register_bit(&priv_dev->regs->usb_cmd,
|
|
USB_CMD_STMODE |
|
|
USB_STS_TMODE_SEL(tmode - 1));
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cdns3_ep0_feature_handle_intf(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl,
|
|
int set)
|
|
{
|
|
u32 wValue;
|
|
int ret = 0;
|
|
|
|
wValue = le16_to_cpu(ctrl->wValue);
|
|
|
|
switch (wValue) {
|
|
case USB_INTRF_FUNC_SUSPEND:
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl,
|
|
int set)
|
|
{
|
|
struct cdns3_endpoint *priv_ep;
|
|
int ret = 0;
|
|
u8 index;
|
|
|
|
if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT)
|
|
return -EINVAL;
|
|
|
|
if (!(ctrl->wIndex & ~USB_DIR_IN))
|
|
return 0;
|
|
|
|
index = cdns3_ep_addr_to_index(ctrl->wIndex);
|
|
priv_ep = priv_dev->eps[index];
|
|
|
|
cdns3_select_ep(priv_dev, ctrl->wIndex);
|
|
|
|
if (set)
|
|
__cdns3_gadget_ep_set_halt(priv_ep);
|
|
else if (!(priv_ep->flags & EP_WEDGE))
|
|
ret = __cdns3_gadget_ep_clear_halt(priv_ep);
|
|
|
|
cdns3_select_ep(priv_dev, 0x00);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_req_ep0_handle_feature -
|
|
* Handling of GET/SET_FEATURE standard USB request
|
|
*
|
|
* @priv_dev: extended gadget object
|
|
* @ctrl_req: pointer to received setup packet
|
|
* @set: must be set to 1 for SET_FEATURE request
|
|
*
|
|
* Returns 0 if success, error code on error
|
|
*/
|
|
static int cdns3_req_ep0_handle_feature(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl,
|
|
int set)
|
|
{
|
|
int ret = 0;
|
|
u32 recip;
|
|
|
|
recip = ctrl->bRequestType & USB_RECIP_MASK;
|
|
|
|
switch (recip) {
|
|
case USB_RECIP_DEVICE:
|
|
ret = cdns3_ep0_feature_handle_device(priv_dev, ctrl, set);
|
|
break;
|
|
case USB_RECIP_INTERFACE:
|
|
ret = cdns3_ep0_feature_handle_intf(priv_dev, ctrl, set);
|
|
break;
|
|
case USB_RECIP_ENDPOINT:
|
|
ret = cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_req_ep0_set_sel - Handling of SET_SEL standard USB request
|
|
* @priv_dev: extended gadget object
|
|
* @ctrl_req: pointer to received setup packet
|
|
*
|
|
* Returns 0 if success, error code on error
|
|
*/
|
|
static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl_req)
|
|
{
|
|
if (priv_dev->gadget.state < USB_STATE_ADDRESS)
|
|
return -EINVAL;
|
|
|
|
if (ctrl_req->wLength != 6) {
|
|
dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n",
|
|
ctrl_req->wLength);
|
|
return -EINVAL;
|
|
}
|
|
|
|
cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, 6, 1, 0);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_req_ep0_set_isoch_delay -
|
|
* Handling of GET_ISOCH_DELAY standard USB request
|
|
* @priv_dev: extended gadget object
|
|
* @ctrl_req: pointer to received setup packet
|
|
*
|
|
* Returns 0 if success, error code on error
|
|
*/
|
|
static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl_req)
|
|
{
|
|
if (ctrl_req->wIndex || ctrl_req->wLength)
|
|
return -EINVAL;
|
|
|
|
priv_dev->isoch_delay = ctrl_req->wValue;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep0_standard_request - Handling standard USB requests
|
|
* @priv_dev: extended gadget object
|
|
* @ctrl_req: pointer to received setup packet
|
|
*
|
|
* Returns 0 if success, error code on error
|
|
*/
|
|
static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev,
|
|
struct usb_ctrlrequest *ctrl_req)
|
|
{
|
|
int ret;
|
|
|
|
switch (ctrl_req->bRequest) {
|
|
case USB_REQ_SET_ADDRESS:
|
|
ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req);
|
|
break;
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
ret = cdns3_req_ep0_set_configuration(priv_dev, ctrl_req);
|
|
break;
|
|
case USB_REQ_GET_STATUS:
|
|
ret = cdns3_req_ep0_get_status(priv_dev, ctrl_req);
|
|
break;
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0);
|
|
break;
|
|
case USB_REQ_SET_FEATURE:
|
|
ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 1);
|
|
break;
|
|
case USB_REQ_SET_SEL:
|
|
ret = cdns3_req_ep0_set_sel(priv_dev, ctrl_req);
|
|
break;
|
|
case USB_REQ_SET_ISOCH_DELAY:
|
|
ret = cdns3_req_ep0_set_isoch_delay(priv_dev, ctrl_req);
|
|
break;
|
|
default:
|
|
ret = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __pending_setup_status_handler(struct cdns3_device *priv_dev)
|
|
{
|
|
struct usb_request *request = priv_dev->pending_status_request;
|
|
|
|
if (priv_dev->status_completion_no_call && request &&
|
|
request->complete) {
|
|
request->complete(&priv_dev->eps[0]->endpoint, request);
|
|
priv_dev->status_completion_no_call = 0;
|
|
}
|
|
}
|
|
|
|
void cdns3_pending_setup_status_handler(struct work_struct *work)
|
|
{
|
|
struct cdns3_device *priv_dev = container_of(work, struct cdns3_device,
|
|
pending_status_wq);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
__pending_setup_status_handler(priv_dev);
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep0_setup_phase - Handling setup USB requests
|
|
* @priv_dev: extended gadget object
|
|
*/
|
|
static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev)
|
|
{
|
|
struct usb_ctrlrequest *ctrl = priv_dev->setup_buf;
|
|
struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
|
|
int result;
|
|
|
|
/* Invalidate Setup Packet received */
|
|
invalidate_dcache_range(priv_dev->setup_dma,
|
|
priv_dev->setup_dma + ARCH_DMA_MINALIGN);
|
|
|
|
priv_dev->ep0_data_dir = ctrl->bRequestType & USB_DIR_IN;
|
|
|
|
trace_cdns3_ctrl_req(ctrl);
|
|
|
|
if (!list_empty(&priv_ep->pending_req_list)) {
|
|
struct usb_request *request;
|
|
|
|
request = cdns3_next_request(&priv_ep->pending_req_list);
|
|
priv_ep->dir = priv_dev->ep0_data_dir;
|
|
cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
|
|
-ECONNRESET);
|
|
}
|
|
|
|
if (le16_to_cpu(ctrl->wLength))
|
|
priv_dev->ep0_stage = CDNS3_DATA_STAGE;
|
|
else
|
|
priv_dev->ep0_stage = CDNS3_STATUS_STAGE;
|
|
|
|
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
|
|
result = cdns3_ep0_standard_request(priv_dev, ctrl);
|
|
else
|
|
result = cdns3_ep0_delegate_req(priv_dev, ctrl);
|
|
|
|
if (result == USB_GADGET_DELAYED_STATUS)
|
|
return;
|
|
|
|
if (result < 0)
|
|
cdns3_ep0_complete_setup(priv_dev, 1, 1);
|
|
else if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE)
|
|
cdns3_ep0_complete_setup(priv_dev, 0, 1);
|
|
}
|
|
|
|
static void cdns3_transfer_completed(struct cdns3_device *priv_dev)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
|
|
|
|
if (!list_empty(&priv_ep->pending_req_list)) {
|
|
struct usb_request *request;
|
|
|
|
trace_cdns3_complete_trb(priv_ep, priv_ep->trb_pool);
|
|
request = cdns3_next_request(&priv_ep->pending_req_list);
|
|
|
|
/* Invalidate TRB before accessing it */
|
|
invalidate_dcache_range((unsigned long)priv_ep->trb_pool,
|
|
(unsigned long)priv_ep->trb_pool +
|
|
ROUND(sizeof(struct cdns3_trb),
|
|
CONFIG_SYS_CACHELINE_SIZE));
|
|
|
|
request->actual =
|
|
TRB_LEN(le32_to_cpu(priv_ep->trb_pool->length));
|
|
|
|
priv_ep->dir = priv_dev->ep0_data_dir;
|
|
cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), 0);
|
|
}
|
|
|
|
cdns3_ep0_complete_setup(priv_dev, 0, 0);
|
|
}
|
|
|
|
/**
|
|
* cdns3_check_new_setup - Check if controller receive new SETUP packet.
|
|
* @priv_dev: extended gadget object
|
|
*
|
|
* The SETUP packet can be kept in on-chip memory or in system memory.
|
|
*/
|
|
static bool cdns3_check_new_setup(struct cdns3_device *priv_dev)
|
|
{
|
|
u32 ep_sts_reg;
|
|
|
|
cdns3_select_ep(priv_dev, 0 | USB_DIR_OUT);
|
|
ep_sts_reg = readl(&priv_dev->regs->ep_sts);
|
|
|
|
return !!(ep_sts_reg & (EP_STS_SETUP | EP_STS_STPWAIT));
|
|
}
|
|
|
|
/**
|
|
* cdns3_check_ep0_interrupt_proceed - Processes interrupt related to endpoint 0
|
|
* @priv_dev: extended gadget object
|
|
* @dir: USB_DIR_IN for IN direction, USB_DIR_OUT for OUT direction
|
|
*/
|
|
void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
|
|
{
|
|
u32 ep_sts_reg;
|
|
|
|
cdns3_select_ep(priv_dev, dir);
|
|
|
|
ep_sts_reg = readl(&priv_dev->regs->ep_sts);
|
|
writel(ep_sts_reg, &priv_dev->regs->ep_sts);
|
|
|
|
trace_cdns3_ep0_irq(priv_dev, ep_sts_reg);
|
|
|
|
__pending_setup_status_handler(priv_dev);
|
|
|
|
if (ep_sts_reg & EP_STS_SETUP)
|
|
priv_dev->wait_for_setup = 1;
|
|
|
|
if (priv_dev->wait_for_setup && ep_sts_reg & EP_STS_IOC) {
|
|
priv_dev->wait_for_setup = 0;
|
|
cdns3_allow_enable_l1(priv_dev, 0);
|
|
cdns3_ep0_setup_phase(priv_dev);
|
|
} else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
|
|
priv_dev->ep0_data_dir = dir;
|
|
cdns3_transfer_completed(priv_dev);
|
|
}
|
|
|
|
if (ep_sts_reg & EP_STS_DESCMIS) {
|
|
if (dir == 0 && !priv_dev->setup_pending)
|
|
cdns3_prepare_setup_packet(priv_dev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep0_enable
|
|
* Function shouldn't be called by gadget driver,
|
|
* endpoint 0 is allways active
|
|
*/
|
|
static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep0_disable
|
|
* Function shouldn't be called by gadget driver,
|
|
* endpoint 0 is allways active
|
|
*/
|
|
static int cdns3_gadget_ep0_disable(struct usb_ep *ep)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep0_set_halt
|
|
* @ep: pointer to endpoint zero object
|
|
* @value: 1 for set stall, 0 for clear stall
|
|
*
|
|
* Returns 0
|
|
*/
|
|
static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
|
|
{
|
|
/* TODO */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep0_queue Transfer data on endpoint zero
|
|
* @ep: pointer to endpoint zero object
|
|
* @request: pointer to request object
|
|
* @gfp_flags: gfp flags
|
|
*
|
|
* Returns 0 on success, error code elsewhere
|
|
*/
|
|
static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
|
|
struct usb_request *request,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
unsigned long flags;
|
|
int erdy_sent = 0;
|
|
int ret = 0;
|
|
u8 zlp = 0;
|
|
|
|
trace_cdns3_ep0_queue(priv_dev, request);
|
|
|
|
/* cancel the request if controller receive new SETUP packet. */
|
|
if (cdns3_check_new_setup(priv_dev))
|
|
return -ECONNRESET;
|
|
|
|
/* send STATUS stage. Should be called only for SET_CONFIGURATION */
|
|
if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) {
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
cdns3_select_ep(priv_dev, 0x00);
|
|
|
|
erdy_sent = !priv_dev->hw_configured_flag;
|
|
cdns3_set_hw_configuration(priv_dev);
|
|
|
|
if (!erdy_sent)
|
|
cdns3_ep0_complete_setup(priv_dev, 0, 1);
|
|
|
|
cdns3_allow_enable_l1(priv_dev, 1);
|
|
|
|
request->actual = 0;
|
|
priv_dev->status_completion_no_call = true;
|
|
priv_dev->pending_status_request = request;
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
|
|
/*
|
|
* Since there is no completion interrupt for status stage,
|
|
* it needs to call ->completion in software after
|
|
* ep0_queue is back.
|
|
*/
|
|
#ifndef __UBOOT__
|
|
queue_work(system_freezable_wq, &priv_dev->pending_status_wq);
|
|
#else
|
|
__pending_setup_status_handler(priv_dev);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
if (!list_empty(&priv_ep->pending_req_list)) {
|
|
dev_err(priv_dev->dev,
|
|
"can't handle multiple requests for ep0\n");
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
ret = usb_gadget_map_request(&priv_dev->gadget, request,
|
|
priv_dev->ep0_data_dir);
|
|
if (ret) {
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
dev_err(priv_dev->dev, "failed to map request\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
request->status = -EINPROGRESS;
|
|
list_add_tail(&request->list, &priv_ep->pending_req_list);
|
|
|
|
if (request->zero && request->length &&
|
|
(request->length % ep->maxpacket == 0))
|
|
zlp = 1;
|
|
|
|
cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1, zlp);
|
|
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep_set_wedge Set wedge on selected endpoint
|
|
* @ep: endpoint object
|
|
*
|
|
* Returns 0
|
|
*/
|
|
int cdns3_gadget_ep_set_wedge(struct usb_ep *ep)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
|
|
|
|
dev_dbg(priv_ep->cdns3_dev->dev, "Wedge for %s\n", ep->name);
|
|
cdns3_gadget_ep_set_halt(ep, 1);
|
|
priv_ep->flags |= EP_WEDGE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct usb_ep_ops cdns3_gadget_ep0_ops = {
|
|
.enable = cdns3_gadget_ep0_enable,
|
|
.disable = cdns3_gadget_ep0_disable,
|
|
.alloc_request = cdns3_gadget_ep_alloc_request,
|
|
.free_request = cdns3_gadget_ep_free_request,
|
|
.queue = cdns3_gadget_ep0_queue,
|
|
.dequeue = cdns3_gadget_ep_dequeue,
|
|
.set_halt = cdns3_gadget_ep0_set_halt,
|
|
.set_wedge = cdns3_gadget_ep_set_wedge,
|
|
};
|
|
|
|
/**
|
|
* cdns3_ep0_config - Configures default endpoint
|
|
* @priv_dev: extended gadget object
|
|
*
|
|
* Functions sets parameters: maximal packet size and enables interrupts
|
|
*/
|
|
void cdns3_ep0_config(struct cdns3_device *priv_dev)
|
|
{
|
|
struct cdns3_usb_regs __iomem *regs;
|
|
struct cdns3_endpoint *priv_ep;
|
|
u32 max_packet_size = 64;
|
|
|
|
regs = priv_dev->regs;
|
|
|
|
if (priv_dev->gadget.speed == USB_SPEED_SUPER)
|
|
max_packet_size = 512;
|
|
|
|
priv_ep = priv_dev->eps[0];
|
|
|
|
if (!list_empty(&priv_ep->pending_req_list)) {
|
|
struct usb_request *request;
|
|
|
|
request = cdns3_next_request(&priv_ep->pending_req_list);
|
|
list_del_init(&request->list);
|
|
}
|
|
|
|
priv_dev->u1_allowed = 0;
|
|
priv_dev->u2_allowed = 0;
|
|
|
|
priv_dev->gadget.ep0->maxpacket = max_packet_size;
|
|
cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
|
|
|
|
/* init ep out */
|
|
cdns3_select_ep(priv_dev, USB_DIR_OUT);
|
|
|
|
if (priv_dev->dev_ver >= DEV_VER_V3) {
|
|
cdns3_set_register_bit(&priv_dev->regs->dtrans,
|
|
BIT(0) | BIT(16));
|
|
cdns3_set_register_bit(&priv_dev->regs->tdl_from_trb,
|
|
BIT(0) | BIT(16));
|
|
}
|
|
|
|
writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size),
|
|
®s->ep_cfg);
|
|
|
|
writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN,
|
|
®s->ep_sts_en);
|
|
|
|
/* init ep in */
|
|
cdns3_select_ep(priv_dev, USB_DIR_IN);
|
|
|
|
writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size),
|
|
®s->ep_cfg);
|
|
|
|
writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, ®s->ep_sts_en);
|
|
|
|
cdns3_set_register_bit(®s->usb_conf, USB_CONF_U1DS | USB_CONF_U2DS);
|
|
}
|
|
|
|
/**
|
|
* cdns3_init_ep0 Initializes software endpoint 0 of gadget
|
|
* @priv_dev: extended gadget object
|
|
* @ep_priv: extended endpoint object
|
|
*
|
|
* Returns 0 on success else error code.
|
|
*/
|
|
int cdns3_init_ep0(struct cdns3_device *priv_dev,
|
|
struct cdns3_endpoint *priv_ep)
|
|
{
|
|
sprintf(priv_ep->name, "ep0");
|
|
|
|
/* fill linux fields */
|
|
priv_ep->endpoint.ops = &cdns3_gadget_ep0_ops;
|
|
priv_ep->endpoint.maxburst = 1;
|
|
usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
|
|
CDNS3_EP0_MAX_PACKET_LIMIT);
|
|
#ifndef __UBOOT__
|
|
priv_ep->endpoint.address = 0;
|
|
#endif
|
|
priv_ep->endpoint.caps.type_control = 1;
|
|
priv_ep->endpoint.caps.dir_in = 1;
|
|
priv_ep->endpoint.caps.dir_out = 1;
|
|
priv_ep->endpoint.name = priv_ep->name;
|
|
priv_ep->endpoint.desc = &cdns3_gadget_ep0_desc;
|
|
priv_dev->gadget.ep0 = &priv_ep->endpoint;
|
|
priv_ep->type = USB_ENDPOINT_XFER_CONTROL;
|
|
|
|
return cdns3_allocate_trb_pool(priv_ep);
|
|
}
|