u-boot/arch/arm/mach-imx/cache.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

106 lines
2.9 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <asm/armv7.h>
#include <asm/pl310.h>
#include <asm/io.h>
#include <asm/mach-imx/sys_proto.h>
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
enum dcache_option option = DCACHE_WRITETHROUGH;
#else
enum dcache_option option = DCACHE_WRITEBACK;
#endif
/* Avoid random hang when download by usb */
invalidate_dcache_all();
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
/* Enable caching on OCRAM and ROM */
mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
ROMCP_ARB_END_ADDR,
option);
mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
IRAM_SIZE,
option);
}
#endif
#ifndef CONFIG_SYS_L2CACHE_OFF
#ifdef CONFIG_SYS_L2_PL310
#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002
void v7_outer_cache_enable(void)
{
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
unsigned int val;
/*
* Must disable the L2 before changing the latency parameters
* and auxiliary control register.
*/
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
/*
* Set bit 22 in the auxiliary control register. If this bit
* is cleared, PL310 treats Normal Shared Non-cacheable
* accesses as Cacheable no-allocate.
*/
setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
if (is_mx6sl() || is_mx6sll()) {
val = readl(&iomux->gpr[11]);
if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
/* L2 cache configured as OCRAM, reset it */
val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
writel(val, &iomux->gpr[11]);
}
}
writel(0x132, &pl310->pl310_tag_latency_ctrl);
writel(0x132, &pl310->pl310_data_latency_ctrl);
val = readl(&pl310->pl310_prefetch_ctrl);
/* Turn on the L2 I/D prefetch */
val |= 0x30000000;
/*
* The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
* The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
* But according to ARM PL310 errata: 752271
* ID: 752271: Double linefill feature can cause data corruption
* Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
* Workaround: The only workaround to this erratum is to disable the
* double linefill feature. This is the default behavior.
*/
#ifndef CONFIG_MX6Q
val |= 0x40800000;
#endif
writel(val, &pl310->pl310_prefetch_ctrl);
val = readl(&pl310->pl310_power_ctrl);
val |= L2X0_DYNAMIC_CLK_GATING_EN;
val |= L2X0_STNDBY_MODE_EN;
writel(val, &pl310->pl310_power_ctrl);
setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
void v7_outer_cache_disable(void)
{
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
#endif /* !CONFIG_SYS_L2_PL310 */
#endif /* !CONFIG_SYS_L2CACHE_OFF */