u-boot/arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

49 lines
1.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2017 Linaro
* Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
*/
#ifndef __HI3798cv200_H__
#define __HI3798cv200_H__
#define REG_BASE_PERI_CTRL 0xF8A20000
#define REG_BASE_CRG 0xF8A22000
/* DEVICES */
#define REG_BASE_MCI 0xF9830000
#define REG_BASE_UART0 0xF8B00000
/* PERI control registers (4KB) */
/* USB2 PHY01 configuration register */
#define PERI_CTRL_USB0 (REG_BASE_PERI_CTRL + 0x120)
/* PERI CRG registers (4KB) */
/* USB2 CTRL0 clock and soft reset */
#define PERI_CRG46 (REG_BASE_CRG + 0xb8)
#define USB2_BUS_CKEN (1<<0)
#define USB2_OHCI48M_CKEN (1<<1)
#define USB2_OHCI12M_CKEN (1<<2)
#define USB2_OTG_UTMI_CKEN (1<<3)
#define USB2_HST_PHY_CKEN (1<<4)
#define USB2_UTMI0_CKEN (1<<5)
#define USB2_BUS_SRST_REQ (1<<12)
#define USB2_UTMI0_SRST_REQ (1<<13)
#define USB2_HST_PHY_SYST_REQ (1<<16)
#define USB2_OTG_PHY_SYST_REQ (1<<17)
#define USB2_CLK48_SEL (1<<20)
/* USB2 PHY clock and soft reset */
#define PERI_CRG47 (REG_BASE_CRG + 0xbc)
#define USB2_PHY01_REF_CKEN (1 << 0)
#define USB2_PHY2_REF_CKEN (1 << 2)
#define USB2_PHY01_SRST_REQ (1 << 4)
#define USB2_PHY2_SRST_REQ (1 << 6)
#define USB2_PHY01_SRST_TREQ0 (1 << 8)
#define USB2_PHY01_SRST_TREQ1 (1 << 9)
#define USB2_PHY2_SRST_TREQ (1 << 10)
#define USB2_PHY01_REFCLK_SEL (1 << 12)
#define USB2_PHY2_REFCLK_SEL (1 << 14)
#endif