u-boot/drivers/mtd/spi/sf_probe.c
Marek Vasut bf64035a15 mtd: spi: Fix page size for S25FL032P,S25FL064P
The commit 6af8dc3ebc broke support for
S25FL032P and S25FL064P by carelessly removing the code handling special
page size for these two SPI NOR flashes and unifying the code under the
assumption that Extended JEDEC ID of 0x4d00 always implies 512b page size.

Add special case handling for these two SPI NOR flashes.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-03-17 21:54:57 +05:30

391 lines
9.6 KiB
C

/*
* SPI flash probing
*
* Copyright (C) 2008 Atmel Corporation
* Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <malloc.h>
#include <spi.h>
#include <spi_flash.h>
#include <asm/io.h>
#include "sf_internal.h"
DECLARE_GLOBAL_DATA_PTR;
/* Read commands array */
static u8 spi_read_cmds_array[] = {
CMD_READ_ARRAY_SLOW,
CMD_READ_DUAL_OUTPUT_FAST,
CMD_READ_DUAL_IO_FAST,
CMD_READ_QUAD_OUTPUT_FAST,
CMD_READ_QUAD_IO_FAST,
};
#ifdef CONFIG_SPI_FLASH_MACRONIX
static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
{
u8 qeb_status;
int ret;
ret = spi_flash_cmd_read_status(flash, &qeb_status);
if (ret < 0)
return ret;
if (qeb_status & STATUS_QEB_MXIC) {
debug("SF: mxic: QEB is already set\n");
} else {
ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
if (ret < 0)
return ret;
}
return ret;
}
#endif
#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
{
u8 qeb_status;
int ret;
ret = spi_flash_cmd_read_config(flash, &qeb_status);
if (ret < 0)
return ret;
if (qeb_status & STATUS_QEB_WINSPAN) {
debug("SF: winspan: QEB is already set\n");
} else {
ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
if (ret < 0)
return ret;
}
return ret;
}
#endif
static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
{
switch (idcode0) {
#ifdef CONFIG_SPI_FLASH_MACRONIX
case SPI_FLASH_CFI_MFR_MACRONIX:
return spi_flash_set_qeb_mxic(flash);
#endif
#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
case SPI_FLASH_CFI_MFR_SPANSION:
case SPI_FLASH_CFI_MFR_WINBOND:
return spi_flash_set_qeb_winspan(flash);
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO
case SPI_FLASH_CFI_MFR_STMICRO:
debug("SF: QEB is volatile for %02x flash\n", idcode0);
return 0;
#endif
default:
printf("SF: Need set QEB func for %02x flash\n", idcode0);
return -1;
}
}
static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
u8 *idcode)
{
const struct spi_flash_params *params;
struct spi_flash *flash;
u8 cmd;
u16 jedec = idcode[1] << 8 | idcode[2];
u16 ext_jedec = idcode[3] << 8 | idcode[4];
params = spi_flash_params_table;
for (; params->name != NULL; params++) {
if ((params->jedec >> 16) == idcode[0]) {
if ((params->jedec & 0xFFFF) == jedec) {
if (params->ext_jedec == 0)
break;
else if (params->ext_jedec == ext_jedec)
break;
}
}
}
if (!params->name) {
printf("SF: Unsupported flash IDs: ");
printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
idcode[0], jedec, ext_jedec);
return NULL;
}
flash = calloc(1, sizeof(*flash));
if (!flash) {
debug("SF: Failed to allocate spi_flash\n");
return NULL;
}
/* Assign spi data */
flash->spi = spi;
flash->name = params->name;
flash->memory_map = spi->memory_map;
flash->dual_flash = flash->spi->option;
/* Assign spi_flash ops */
flash->write = spi_flash_cmd_write_ops;
#ifdef CONFIG_SPI_FLASH_SST
if (params->flags & SST_WP)
flash->write = sst_write_wp;
#endif
flash->erase = spi_flash_cmd_erase_ops;
flash->read = spi_flash_cmd_read_ops;
/* Compute the flash size */
flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
/*
* The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
* 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
* the 0x4d00 Extended JEDEC code have 512b pages. All of the others
* have 256b pages.
*/
if (ext_jedec == 0x4d00) {
if ((jedec == 0x0215) || (jedec == 0x216))
flash->page_size = 256;
else
flash->page_size = 512;
} else {
flash->page_size = 256;
}
flash->page_size <<= flash->shift;
flash->sector_size = params->sector_size << flash->shift;
flash->size = flash->sector_size * params->nr_sectors << flash->shift;
#ifdef CONFIG_SF_DUAL_FLASH
if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
flash->size <<= 1;
#endif
/* Compute erase sector and command */
if (params->flags & SECT_4K) {
flash->erase_cmd = CMD_ERASE_4K;
flash->erase_size = 4096 << flash->shift;
} else if (params->flags & SECT_32K) {
flash->erase_cmd = CMD_ERASE_32K;
flash->erase_size = 32768 << flash->shift;
} else {
flash->erase_cmd = CMD_ERASE_64K;
flash->erase_size = flash->sector_size;
}
/* Look for the fastest read cmd */
cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
if (cmd) {
cmd = spi_read_cmds_array[cmd - 1];
flash->read_cmd = cmd;
} else {
/* Go for default supported read cmd */
flash->read_cmd = CMD_READ_ARRAY_FAST;
}
/* Not require to look for fastest only two write cmds yet */
if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP)
flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
else
/* Go for default supported write cmd */
flash->write_cmd = CMD_PAGE_PROGRAM;
/* Set the quad enable bit - only for quad commands */
if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
(flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
(flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
if (spi_flash_set_qeb(flash, idcode[0])) {
debug("SF: Fail to set QEB for %02x\n", idcode[0]);
return NULL;
}
}
/* Read dummy_byte: dummy byte is determined based on the
* dummy cycles of a particular command.
* Fast commands - dummy_byte = dummy_cycles/8
* I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
* For I/O commands except cmd[0] everything goes on no.of lines
* based on particular command but incase of fast commands except
* data all go on single line irrespective of command.
*/
switch (flash->read_cmd) {
case CMD_READ_QUAD_IO_FAST:
flash->dummy_byte = 2;
break;
case CMD_READ_ARRAY_SLOW:
flash->dummy_byte = 0;
break;
default:
flash->dummy_byte = 1;
}
/* Poll cmd selection */
flash->poll_cmd = CMD_READ_STATUS;
#ifdef CONFIG_SPI_FLASH_STMICRO
if (params->flags & E_FSR)
flash->poll_cmd = CMD_FLAG_STATUS;
#endif
/* Configure the BAR - discover bank cmds and read current bank */
#ifdef CONFIG_SPI_FLASH_BAR
u8 curr_bank = 0;
if (flash->size > SPI_FLASH_16MB_BOUN) {
flash->bank_read_cmd = (idcode[0] == 0x01) ?
CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
flash->bank_write_cmd = (idcode[0] == 0x01) ?
CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
&curr_bank, 1)) {
debug("SF: fail to read bank addr register\n");
return NULL;
}
flash->bank_curr = curr_bank;
} else {
flash->bank_curr = curr_bank;
}
#endif
/* Flash powers up read-only, so clear BP# bits */
#if defined(CONFIG_SPI_FLASH_ATMEL) || \
defined(CONFIG_SPI_FLASH_MACRONIX) || \
defined(CONFIG_SPI_FLASH_SST)
spi_flash_cmd_write_status(flash, 0);
#endif
return flash;
}
#ifdef CONFIG_OF_CONTROL
int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
{
fdt_addr_t addr;
fdt_size_t size;
int node;
/* If there is no node, do nothing */
node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
if (node < 0)
return 0;
addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
if (addr == FDT_ADDR_T_NONE) {
debug("%s: Cannot decode address\n", __func__);
return 0;
}
if (flash->size != size) {
debug("%s: Memory map must cover entire device\n", __func__);
return -1;
}
flash->memory_map = map_sysmem(addr, size);
return 0;
}
#endif /* CONFIG_OF_CONTROL */
static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
{
struct spi_flash *flash = NULL;
u8 idcode[5];
int ret;
/* Setup spi_slave */
if (!spi) {
printf("SF: Failed to set up slave\n");
return NULL;
}
/* Claim spi bus */
ret = spi_claim_bus(spi);
if (ret) {
debug("SF: Failed to claim SPI bus: %d\n", ret);
goto err_claim_bus;
}
/* Read the ID codes */
ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
if (ret) {
printf("SF: Failed to get idcodes\n");
goto err_read_id;
}
#ifdef DEBUG
printf("SF: Got idcodes\n");
print_buffer(0, idcode, 1, sizeof(idcode), 0);
#endif
/* Validate params from spi_flash_params table */
flash = spi_flash_validate_params(spi, idcode);
if (!flash)
goto err_read_id;
#ifdef CONFIG_OF_CONTROL
if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
debug("SF: FDT decode error\n");
goto err_read_id;
}
#endif
#ifndef CONFIG_SPL_BUILD
printf("SF: Detected %s with page size ", flash->name);
print_size(flash->page_size, ", erase size ");
print_size(flash->erase_size, ", total ");
print_size(flash->size, "");
if (flash->memory_map)
printf(", mapped at %p", flash->memory_map);
puts("\n");
#endif
#ifndef CONFIG_SPI_FLASH_BAR
if (((flash->dual_flash == SF_SINGLE_FLASH) &&
(flash->size > SPI_FLASH_16MB_BOUN)) ||
((flash->dual_flash > SF_SINGLE_FLASH) &&
(flash->size > SPI_FLASH_16MB_BOUN << 1))) {
puts("SF: Warning - Only lower 16MiB accessible,");
puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
}
#endif
/* Release spi bus */
spi_release_bus(spi);
return flash;
err_read_id:
spi_release_bus(spi);
err_claim_bus:
spi_free_slave(spi);
return NULL;
}
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
{
struct spi_slave *spi;
spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
return spi_flash_probe_slave(spi);
}
#ifdef CONFIG_OF_SPI_FLASH
struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
int spi_node)
{
struct spi_slave *spi;
spi = spi_setup_slave_fdt(blob, slave_node, spi_node);
return spi_flash_probe_slave(spi);
}
#endif
void spi_flash_free(struct spi_flash *flash)
{
spi_free_slave(flash->spi);
free(flash);
}