u-boot/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
Klaus Goger a13110a99f rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3399.

It provides the following feature set:
 * up to 4GB DDR3
 * on-module SPI-NOR flash
 * on-module eMMC (with 8-bit interace)
 * SD card (on a baseboad) via edge connector
 * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY
 * HDMI/eDP/MIPI displays
 * 2x MIPI-CSI
 * USB
   - 1x USB 3.0 dual-role (direct connection)
   - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub)
 * on-module STM32 Cortex-M0 companion controller, implementing:
   - low-power RTC functionality (ISL1208 emulation)
   - fan controller (AMC6821 emulation)
   - USB<->CAN bridge controller

Note that we use a multi-payload FIT image for booting and have
Cortex-M0 payload in a separate subimage: we thus rely on the FIT
image loader to put it into the SRAM region that ATF expects it in.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Fixed build warning on puma-rk3399:
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-15 10:13:17 -06:00

57 lines
1.2 KiB
Text

/*
* Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
*
* Minimal dts for a SPL FIT image payload.
*
* SPDX-License-Identifier: GPL-2.0+ X11
*/
/dts-v1/;
/ {
description = "FIT image with U-Boot proper, ATF bl31, M0 Firmware, DTB";
#address-cells = <1>;
images {
uboot@1 {
description = "U-Boot (64-bit)";
data = /incbin/("../../../u-boot-nodtb.bin");
type = "standalone";
arch = "arm64";
compression = "none";
load = <0x00200000>;
};
atf@1 {
description = "ARM Trusted Firmware";
data = /incbin/("../../../bl31.bin");
type = "firmware";
arch = "arm64";
compression = "none";
load = <0x00001000>;
entry = <0x00001000>;
};
pmu@1 {
description = "Cortex-M0 firmware";
data = /incbin/("../../../rk3399m0.bin");
type = "pmu-firmware";
compression = "none";
load = <0xff8c0000>;
};
fdt@1 {
description = "RK3399-Q7 (Puma) flat device-tree";
data = /incbin/("../../../u-boot.dtb");
type = "flat_dt";
compression = "none";
};
};
configurations {
default = "conf@1";
conf@1 {
description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
firmware = "uboot@1";
loadables = "atf@1";
fdt = "fdt@1";
};
};
};