u-boot/arch/arm
Wenyou Yang 25e88d406e ARM: dts: at91: Add dts files for at91sam9x5ek
The device tree source files of at91sam9x5ek board are copied from
the Linux v4.10, do the changes below.
 - Add the reg property for the pinctrl node.
 - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's
   slibling nodes, instead of the child nodes.
 - Add the "u-boot,dm-pre-reloc" property to determine which nodes
   are used by the board_init_f stage.
 - Change the compatible of the spi flash to "spi-flash".
 - Add the spi0 aliases.
 - Fix the compilation warnings.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 12:14:15 -06:00
..
cpu Add ARM errata workaround 852421 and 852423 for Cortex-A17 2017-05-08 11:57:36 -04:00
dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
imx-common Convert CONFIG_CMD_DEKBLOB to Kconfig 2017-04-30 13:41:00 -04:00
include Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2017-05-08 15:44:44 -04:00
lib spl: make image arg or fdt blob address reconfigurable 2017-05-08 11:38:40 -04:00
mach-aspeed aspeed: Refactor SCU to use consistent mask & shift 2017-05-08 11:57:35 -04:00
mach-at91 board: sama5d4ek: fix DD2 configuration 2017-05-09 12:14:15 -06:00
mach-bcm283x ARM: bcm283x: Implement EFI RTS reset_system 2016-11-28 20:15:19 -05:00
mach-davinci Remove various unused interrupt related code 2017-04-06 20:42:18 -04:00
mach-exynos ARM: Migrate errata to Kconfig 2017-03-09 19:52:50 -05:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone ARM: keystone2: Add support for getting external clock dynamically 2017-05-08 12:34:29 -04:00
mach-kirkwood Convert CONFIG_CMD_DIAG to Kconfig 2017-04-30 13:41:01 -04:00
mach-meson board_f: Drop setup_dram_config() wrapper 2017-04-05 16:36:51 -04:00
mach-mvebu arm64: mvebu: incorrect check of fdt address cells 2017-05-05 16:45:56 -04:00
mach-omap2 igep003x: Add support for IGEP SMARC AM335x 2017-05-08 11:57:27 -04:00
mach-orion5x board_f: Drop setup_dram_config() wrapper 2017-04-05 16:36:51 -04:00
mach-rmobile armv8: aarch64: Fix the warning about x1-x3 nonzero issue 2017-01-18 09:29:33 -08:00
mach-rockchip rockchip: Print a message when returning to the bootrom 2017-04-18 10:29:26 -04:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon drivers/sysreset: group sysreset drivers 2016-08-12 09:22:17 -04:00
mach-socfpga arm: socfpga: add cyclone5 based de10-nano board 2017-04-25 12:46:44 +02:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 stm32f7: enable instruction & data cache 2017-04-08 09:26:51 -04:00
mach-sunxi sunxi: add clock configuration of R40 sata 2017-05-02 09:21:09 +02:00
mach-tegra power: Rename CONFIG_AS3722_POWER to CONFIG_PMIC_AS3722 2017-04-30 10:29:47 -04:00
mach-uniphier ARM: uniphier: show STM (SCP) status on boot and pinmon command 2017-04-20 23:49:56 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq zynq: Move zynq to clock framework 2017-02-17 10:22:46 +01:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig 2017-04-27 16:49:08 -04:00
Kconfig Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2017-05-08 15:44:44 -04:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig 2017-04-27 16:49:08 -04:00