mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 01:50:25 +00:00
31d8267224
Change all code that conditionally operates on high bat registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS instead of the myriad ways this is done now. Define the option for every config for which high bats are supported (and enabled by early boot, on parts where they're not always enabled) Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
355 lines
9.6 KiB
C
355 lines
9.6 KiB
C
/*
|
|
* (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
|
|
* wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc., 59
|
|
* Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
|
#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
|
|
#define CONFIG_V38B 1 /* ...on V38B board */
|
|
#define CFG_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */
|
|
|
|
#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
|
|
#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
|
|
|
|
#undef CONFIG_HW_WATCHDOG /* don't use watchdog */
|
|
|
|
#define CONFIG_NETCONSOLE 1
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* do board-specific init */
|
|
|
|
#define CFG_XLB_PIPELINING 1 /* gives better performance */
|
|
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*
|
|
* DDR
|
|
*/
|
|
#define SDRAM_DDR 1 /* is DDR */
|
|
/* Settings for XLB = 132 MHz */
|
|
#define SDRAM_MODE 0x018D0000
|
|
#define SDRAM_EMODE 0x40090000
|
|
#define SDRAM_CONTROL 0x704f0f00
|
|
#define SDRAM_CONFIG1 0x73722930
|
|
#define SDRAM_CONFIG2 0x47770000
|
|
#define SDRAM_TAPDELAY 0x10000000
|
|
|
|
/*
|
|
* PCI - no suport
|
|
*/
|
|
#undef CONFIG_PCI
|
|
|
|
/*
|
|
* Partitions
|
|
*/
|
|
#define CONFIG_MAC_PARTITION 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/*
|
|
* USB
|
|
*/
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_USB_CLOCK 0x0001BBBB
|
|
#define CONFIG_USB_CONFIG 0x00001000
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_DIAG
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_SDRAM
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_CMD_FAT
|
|
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
/*
|
|
* Boot low with 16 MB Flash
|
|
*/
|
|
#define CFG_LOWBOOT 1
|
|
#define CFG_LOWBOOT16 1
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootcmd=run net_nfs\0" \
|
|
"bootdelay=3\0" \
|
|
"baudrate=115200\0" \
|
|
"preboot=echo;echo Type \"run flash_nfs\" to mount root " \
|
|
"filesystem over NFS; echo\0" \
|
|
"netdev=eth0\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \
|
|
"addip=setenv bootargs $(bootargs) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
|
|
"$(netmask):$(hostname):$(netdev):off panic=1\0" \
|
|
"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
|
|
"flash_self=run ramargs addip;bootm $(kernel_addr) " \
|
|
"$(ramdisk_addr)\0" \
|
|
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$(serverip):$(rootpath) wdt=off\0" \
|
|
"hostname=v38b\0" \
|
|
"ethact=FEC ETHERNET\0" \
|
|
"rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \
|
|
"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \
|
|
"cp.b 200000 ff000000 $(filesize);" \
|
|
"prot on ff000000 ff03ffff\0" \
|
|
"load=tftp 200000 $(u-boot)\0" \
|
|
"netmask=255.255.0.0\0" \
|
|
"ipaddr=192.168.160.18\0" \
|
|
"serverip=192.168.1.1\0" \
|
|
"ethaddr=00:e0:ee:00:05:2e\0" \
|
|
"bootfile=/tftpboot/v38b/uImage\0" \
|
|
"u-boot=/tftpboot/v38b/u-boot.bin\0" \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run net_nfs"
|
|
|
|
#if defined(CONFIG_MPC5200)
|
|
/*
|
|
* IPB Bus clocking configuration.
|
|
*/
|
|
#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
#endif
|
|
|
|
/*
|
|
* I2C configuration
|
|
*/
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
|
|
#define CFG_I2C_SPEED 100000 /* 100 kHz */
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
|
|
/*
|
|
* EEPROM configuration
|
|
*/
|
|
#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70
|
|
|
|
/*
|
|
* RTC configuration
|
|
*/
|
|
#define CFG_I2C_RTC_ADDR 0x51
|
|
|
|
/*
|
|
* Flash configuration - use CFI driver
|
|
*/
|
|
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
|
|
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
|
#define CFG_FLASH_CFI_AMD_RESET 1
|
|
#define CFG_FLASH_BASE 0xFF000000
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
|
|
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
|
|
#define CFG_FLASH_SIZE 0x01000000 /* 16 MiB */
|
|
#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
|
|
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000)
|
|
#define CFG_ENV_SIZE 0x10000
|
|
#define CFG_ENV_SECT_SIZE 0x10000
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CFG_MBAR 0xF0000000
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_DEFAULT_MBAR 0x80000000
|
|
|
|
/* Use SRAM until RAM will be available */
|
|
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
|
|
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
# define CFG_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */
|
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Linux initial memory map */
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_PHY_ADDR 0x00
|
|
#define CONFIG_MII 1
|
|
|
|
/*
|
|
* GPIO configuration
|
|
*/
|
|
#define CFG_GPS_PORT_CONFIG 0x90001404
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CFG_HID0_FINAL HID0_ICE
|
|
|
|
#define CFG_BOOTCS_START CFG_FLASH_BASE
|
|
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
|
|
#define CFG_BOOTCS_CFG 0x00047801
|
|
#define CFG_CS0_START CFG_FLASH_BASE
|
|
#define CFG_CS0_SIZE CFG_FLASH_SIZE
|
|
|
|
#define CFG_CS_BURST 0x00000000
|
|
#define CFG_CS_DEADCYCLE 0x33333333
|
|
|
|
#define CFG_RESET_ADDRESS 0xff000000
|
|
|
|
/*
|
|
* IDE/ATA (supports IDE harddisk)
|
|
*/
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
|
|
#define CONFIG_IDE_RESET /* reset for ide supported */
|
|
#define CONFIG_IDE_PREINIT
|
|
|
|
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
|
|
|
|
#define CFG_ATA_IDE0_OFFSET 0x0000
|
|
|
|
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
|
|
|
|
#define CFG_ATA_DATA_OFFSET (0x0060) /* data I/O offset */
|
|
|
|
#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* normal register accesses offset */
|
|
|
|
#define CFG_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */
|
|
|
|
#define CFG_ATA_STRIDE 4 /* Interval between registers */
|
|
|
|
/*
|
|
* Status LED
|
|
*/
|
|
#define CONFIG_STATUS_LED /* Status LED enabled */
|
|
#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
|
|
|
|
#define CFG_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */
|
|
#ifndef __ASSEMBLY__
|
|
typedef unsigned int led_id_t;
|
|
|
|
#define __led_toggle(_msk) \
|
|
do { \
|
|
*((volatile long *) (CFG_LED_BASE)) ^= (_msk); \
|
|
} while(0)
|
|
|
|
#define __led_set(_msk, _st) \
|
|
do { \
|
|
if ((_st)) \
|
|
*((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \
|
|
else \
|
|
*((volatile long *) (CFG_LED_BASE)) |= (_msk); \
|
|
} while(0)
|
|
|
|
#define __led_init(_msk, st) \
|
|
do { \
|
|
*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
|
|
} while(0)
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
#endif /* __CONFIG_H */
|