u-boot/arch/powerpc/include/asm/fsl_secure_boot.h
Simon Glass 73223f0e1b Kconfig: Move CONFIG_FIT and related options to Kconfig
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:07 -04:00

123 lines
3.3 KiB
C

/*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __FSL_SECURE_BOOT_H
#define __FSL_SECURE_BOOT_H
#include <asm/config_mpc85xx.h>
#ifdef CONFIG_SECURE_BOOT
#ifndef CONFIG_FIT_SIGNATURE
#define CONFIG_CHAIN_OF_TRUST
#endif
#if defined(CONFIG_FSL_CORENET)
#define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000
#elif defined(CONFIG_BSC9132QDS)
#define CONFIG_SYS_PBI_FLASH_BASE 0xc8000000
#elif defined(CONFIG_C29XPCIE)
#define CONFIG_SYS_PBI_FLASH_BASE 0xcc000000
#else
#define CONFIG_SYS_PBI_FLASH_BASE 0xce000000
#endif
#define CONFIG_SYS_PBI_FLASH_WINDOW 0xcff80000
#if defined(CONFIG_B4860QDS) || \
defined(CONFIG_T4240QDS) || \
defined(CONFIG_T2080QDS) || \
defined(CONFIG_T2080RDB) || \
defined(CONFIG_T1040QDS) || \
defined(CONFIG_T104xD4QDS) || \
defined(CONFIG_T104xRDB) || \
defined(CONFIG_T104xD4RDB) || \
defined(CONFIG_PPC_T1023) || \
defined(CONFIG_PPC_T1024)
#define CONFIG_SYS_CPC_REINIT_F
#define CONFIG_KEY_REVOCATION
#undef CONFIG_SYS_INIT_L3_ADDR
#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000
#endif
#if defined(CONFIG_RAMBOOT_PBL)
#undef CONFIG_SYS_INIT_L3_ADDR
#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000
#endif
#if defined(CONFIG_C29XPCIE)
#define CONFIG_KEY_REVOCATION
#endif
#if defined(CONFIG_PPC_P3041) || \
defined(CONFIG_PPC_P4080) || \
defined(CONFIG_PPC_P5020) || \
defined(CONFIG_PPC_P5040) || \
defined(CONFIG_PPC_P2041)
#define CONFIG_FSL_TRUST_ARCH_v1
#endif
#if defined(CONFIG_FSL_CORENET) && !defined(CONFIG_SYS_RAMBOOT)
/* The key used for verification of next level images
* is picked up from an Extension Table which has
* been verified by the ISBC (Internal Secure boot Code)
* in boot ROM of the SoC.
* The feature is only applicable in case of NOR boot and is
* not applicable in case of RAMBOOT (NAND, SD, SPI).
*/
#define CONFIG_FSL_ISBC_KEY_EXT
#endif
#endif /* #ifdef CONFIG_SECURE_BOOT */
#ifdef CONFIG_CHAIN_OF_TRUST
#define CONFIG_CMD_ESBC_VALIDATE
#define CONFIG_CMD_BLOB
#define CONFIG_FSL_SEC_MON
#define CONFIG_SHA_PROG_HW_ACCEL
#define CONFIG_RSA_FREESCALE_EXP
#ifndef CONFIG_FSL_CAAM
#define CONFIG_FSL_CAAM
#endif
/* fsl_setenv_chain_of_trust() must be called from
* board_late_init()
*/
#ifndef CONFIG_BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#endif
/* If Boot Script is not on NOR and is required to be copied on RAM */
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
#define CONFIG_BS_HDR_ADDR_RAM 0x00010000
#define CONFIG_BS_HDR_ADDR_FLASH 0x00800000
#define CONFIG_BS_HDR_SIZE 0x00002000
#define CONFIG_BS_ADDR_RAM 0x00012000
#define CONFIG_BS_ADDR_FLASH 0x00802000
#define CONFIG_BS_SIZE 0x00001000
#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
#else
/* The bootscript header address is different for B4860 because the NOR
* mapping is different on B4 due to reduced NOR size.
*/
#if defined(CONFIG_B4860QDS)
#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xecc00000
#elif defined(CONFIG_FSL_CORENET)
#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xe8e00000
#elif defined(CONFIG_BSC9132QDS)
#define CONFIG_BOOTSCRIPT_HDR_ADDR 0x88020000
#elif defined(CONFIG_C29XPCIE)
#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xec020000
#else
#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xee020000
#endif
#endif /* #ifdef CONFIG_BOOTSCRIPT_COPY_RAM */
#include <config_fsl_chain_trust.h>
#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
#endif