mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
8613c8d897
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
511 lines
11 KiB
C
511 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* TI DaVinci (TMS320DM644x) I2C driver.
|
|
*
|
|
* (C) Copyright 2012-2014
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
* (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
* --------------------------------------------------------
|
|
*
|
|
* NOTE: This driver should be converted to driver model before June 2017.
|
|
* Please see doc/driver-model/i2c-howto.rst for instructions.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/i2c_defs.h>
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
#include "davinci_i2c.h"
|
|
|
|
#ifdef CONFIG_DM_I2C
|
|
/* Information about i2c controller */
|
|
struct i2c_bus {
|
|
int id;
|
|
uint speed;
|
|
struct i2c_regs *regs;
|
|
};
|
|
#endif
|
|
|
|
#define CHECK_NACK() \
|
|
do {\
|
|
if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\
|
|
REG(&(i2c_base->i2c_con)) = 0;\
|
|
return 1;\
|
|
} \
|
|
} while (0)
|
|
|
|
static int _wait_for_bus(struct i2c_regs *i2c_base)
|
|
{
|
|
int stat, timeout;
|
|
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
|
|
for (timeout = 0; timeout < 10; timeout++) {
|
|
stat = REG(&(i2c_base->i2c_stat));
|
|
if (!((stat) & I2C_STAT_BB)) {
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
return 0;
|
|
}
|
|
|
|
REG(&(i2c_base->i2c_stat)) = stat;
|
|
udelay(50000);
|
|
}
|
|
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
return 1;
|
|
}
|
|
|
|
static int _poll_i2c_irq(struct i2c_regs *i2c_base, int mask)
|
|
{
|
|
int stat, timeout;
|
|
|
|
for (timeout = 0; timeout < 10; timeout++) {
|
|
udelay(1000);
|
|
stat = REG(&(i2c_base->i2c_stat));
|
|
if (stat & mask)
|
|
return stat;
|
|
}
|
|
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
return stat | I2C_TIMEOUT;
|
|
}
|
|
|
|
static void _flush_rx(struct i2c_regs *i2c_base)
|
|
{
|
|
while (1) {
|
|
if (!(REG(&(i2c_base->i2c_stat)) & I2C_STAT_RRDY))
|
|
break;
|
|
|
|
REG(&(i2c_base->i2c_drr));
|
|
REG(&(i2c_base->i2c_stat)) = I2C_STAT_RRDY;
|
|
udelay(1000);
|
|
}
|
|
}
|
|
|
|
static uint _davinci_i2c_setspeed(struct i2c_regs *i2c_base,
|
|
uint speed)
|
|
{
|
|
uint32_t div, psc;
|
|
|
|
psc = 2;
|
|
/* SCLL + SCLH */
|
|
div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10;
|
|
REG(&(i2c_base->i2c_psc)) = psc; /* 27MHz / (2 + 1) = 9MHz */
|
|
REG(&(i2c_base->i2c_scll)) = (div * 50) / 100; /* 50% Duty */
|
|
REG(&(i2c_base->i2c_sclh)) = div - REG(&(i2c_base->i2c_scll));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void _davinci_i2c_init(struct i2c_regs *i2c_base,
|
|
uint speed, int slaveadd)
|
|
{
|
|
if (REG(&(i2c_base->i2c_con)) & I2C_CON_EN) {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
udelay(50000);
|
|
}
|
|
|
|
_davinci_i2c_setspeed(i2c_base, speed);
|
|
|
|
REG(&(i2c_base->i2c_oa)) = slaveadd;
|
|
REG(&(i2c_base->i2c_cnt)) = 0;
|
|
|
|
/* Interrupts must be enabled or I2C module won't work */
|
|
REG(&(i2c_base->i2c_ie)) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |
|
|
I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE;
|
|
|
|
/* Now enable I2C controller (get it out of reset) */
|
|
REG(&(i2c_base->i2c_con)) = I2C_CON_EN;
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
static int _davinci_i2c_read(struct i2c_regs *i2c_base, uint8_t chip,
|
|
uint32_t addr, int alen, uint8_t *buf, int len)
|
|
{
|
|
uint32_t tmp;
|
|
int i;
|
|
|
|
if ((alen < 0) || (alen > 2)) {
|
|
printf("%s(): bogus address length %x\n", __func__, alen);
|
|
return 1;
|
|
}
|
|
|
|
if (_wait_for_bus(i2c_base))
|
|
return 1;
|
|
|
|
if (alen != 0) {
|
|
/* Start address phase */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX;
|
|
REG(&(i2c_base->i2c_cnt)) = alen;
|
|
REG(&(i2c_base->i2c_sa)) = chip;
|
|
REG(&(i2c_base->i2c_con)) = tmp;
|
|
|
|
tmp = _poll_i2c_irq(i2c_base, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
switch (alen) {
|
|
case 2:
|
|
/* Send address MSByte */
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(&(i2c_base->i2c_dxr)) = (addr >> 8) & 0xff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
|
|
tmp = _poll_i2c_irq(i2c_base,
|
|
I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
/* No break, fall through */
|
|
case 1:
|
|
/* Send address LSByte */
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(&(i2c_base->i2c_dxr)) = addr & 0xff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
|
|
tmp = _poll_i2c_irq(i2c_base, I2C_STAT_XRDY |
|
|
I2C_STAT_NACK | I2C_STAT_ARDY);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_ARDY)) {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Address phase is over, now read 'len' bytes and stop */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP;
|
|
REG(&(i2c_base->i2c_cnt)) = len & 0xffff;
|
|
REG(&(i2c_base->i2c_sa)) = chip;
|
|
REG(&(i2c_base->i2c_con)) = tmp;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
tmp = _poll_i2c_irq(i2c_base, I2C_STAT_RRDY | I2C_STAT_NACK |
|
|
I2C_STAT_ROVR);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_RRDY) {
|
|
buf[i] = REG(&(i2c_base->i2c_drr));
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
tmp = _poll_i2c_irq(i2c_base, I2C_STAT_SCD | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_SCD)) {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
|
|
_flush_rx(i2c_base);
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
REG(&(i2c_base->i2c_cnt)) = 0;
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _davinci_i2c_write(struct i2c_regs *i2c_base, uint8_t chip,
|
|
uint32_t addr, int alen, uint8_t *buf, int len)
|
|
{
|
|
uint32_t tmp;
|
|
int i;
|
|
|
|
if ((alen < 0) || (alen > 2)) {
|
|
printf("%s(): bogus address length %x\n", __func__, alen);
|
|
return 1;
|
|
}
|
|
if (len < 0) {
|
|
printf("%s(): bogus length %x\n", __func__, len);
|
|
return 1;
|
|
}
|
|
|
|
if (_wait_for_bus(i2c_base))
|
|
return 1;
|
|
|
|
/* Start address phase */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
|
|
I2C_CON_TRX | I2C_CON_STP;
|
|
REG(&(i2c_base->i2c_cnt)) = (alen == 0) ?
|
|
len & 0xffff : (len & 0xffff) + alen;
|
|
REG(&(i2c_base->i2c_sa)) = chip;
|
|
REG(&(i2c_base->i2c_con)) = tmp;
|
|
|
|
switch (alen) {
|
|
case 2:
|
|
/* Send address MSByte */
|
|
tmp = _poll_i2c_irq(i2c_base, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(&(i2c_base->i2c_dxr)) = (addr >> 8) & 0xff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
/* No break, fall through */
|
|
case 1:
|
|
/* Send address LSByte */
|
|
tmp = _poll_i2c_irq(i2c_base, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(&(i2c_base->i2c_dxr)) = addr & 0xff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
tmp = _poll_i2c_irq(i2c_base, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY)
|
|
REG(&(i2c_base->i2c_dxr)) = buf[i];
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
tmp = _poll_i2c_irq(i2c_base, I2C_STAT_SCD | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_SCD)) {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
|
|
_flush_rx(i2c_base);
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
REG(&(i2c_base->i2c_cnt)) = 0;
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _davinci_i2c_probe_chip(struct i2c_regs *i2c_base, uint8_t chip)
|
|
{
|
|
int rc = 1;
|
|
|
|
if (chip == REG(&(i2c_base->i2c_oa)))
|
|
return rc;
|
|
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
if (_wait_for_bus(i2c_base))
|
|
return 1;
|
|
|
|
/* try to read one byte from current (or only) address */
|
|
REG(&(i2c_base->i2c_cnt)) = 1;
|
|
REG(&(i2c_base->i2c_sa)) = chip;
|
|
REG(&(i2c_base->i2c_con)) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
|
|
I2C_CON_STP);
|
|
udelay(50000);
|
|
|
|
if (!(REG(&(i2c_base->i2c_stat)) & I2C_STAT_NACK)) {
|
|
rc = 0;
|
|
_flush_rx(i2c_base);
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
REG(&(i2c_base->i2c_con)) |= I2C_CON_STP;
|
|
udelay(20000);
|
|
if (_wait_for_bus(i2c_base))
|
|
return 1;
|
|
}
|
|
|
|
_flush_rx(i2c_base);
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
REG(&(i2c_base->i2c_cnt)) = 0;
|
|
return rc;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_I2C
|
|
static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap)
|
|
{
|
|
switch (adap->hwadapnr) {
|
|
#if CONFIG_SYS_I2C_BUS_MAX >= 3
|
|
case 2:
|
|
return (struct i2c_regs *)I2C2_BASE;
|
|
#endif
|
|
#if CONFIG_SYS_I2C_BUS_MAX >= 2
|
|
case 1:
|
|
return (struct i2c_regs *)I2C1_BASE;
|
|
#endif
|
|
case 0:
|
|
return (struct i2c_regs *)I2C_BASE;
|
|
|
|
default:
|
|
printf("wrong hwadapnr: %d\n", adap->hwadapnr);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static uint davinci_i2c_setspeed(struct i2c_adapter *adap, uint speed)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
uint ret;
|
|
|
|
adap->speed = speed;
|
|
ret = _davinci_i2c_setspeed(i2c_base, speed);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void davinci_i2c_init(struct i2c_adapter *adap, int speed,
|
|
int slaveadd)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
|
|
adap->speed = speed;
|
|
_davinci_i2c_init(i2c_base, speed, slaveadd);
|
|
|
|
return;
|
|
}
|
|
|
|
static int davinci_i2c_read(struct i2c_adapter *adap, uint8_t chip,
|
|
uint32_t addr, int alen, uint8_t *buf, int len)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
return _davinci_i2c_read(i2c_base, chip, addr, alen, buf, len);
|
|
}
|
|
|
|
static int davinci_i2c_write(struct i2c_adapter *adap, uint8_t chip,
|
|
uint32_t addr, int alen, uint8_t *buf, int len)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
|
|
return _davinci_i2c_write(i2c_base, chip, addr, alen, buf, len);
|
|
}
|
|
|
|
static int davinci_i2c_probe_chip(struct i2c_adapter *adap, uint8_t chip)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
|
|
return _davinci_i2c_probe_chip(i2c_base, chip);
|
|
}
|
|
|
|
U_BOOT_I2C_ADAP_COMPLETE(davinci_0, davinci_i2c_init, davinci_i2c_probe_chip,
|
|
davinci_i2c_read, davinci_i2c_write,
|
|
davinci_i2c_setspeed,
|
|
CONFIG_SYS_DAVINCI_I2C_SPEED,
|
|
CONFIG_SYS_DAVINCI_I2C_SLAVE,
|
|
0)
|
|
|
|
#if CONFIG_SYS_I2C_BUS_MAX >= 2
|
|
U_BOOT_I2C_ADAP_COMPLETE(davinci_1, davinci_i2c_init, davinci_i2c_probe_chip,
|
|
davinci_i2c_read, davinci_i2c_write,
|
|
davinci_i2c_setspeed,
|
|
CONFIG_SYS_DAVINCI_I2C_SPEED1,
|
|
CONFIG_SYS_DAVINCI_I2C_SLAVE1,
|
|
1)
|
|
#endif
|
|
|
|
#if CONFIG_SYS_I2C_BUS_MAX >= 3
|
|
U_BOOT_I2C_ADAP_COMPLETE(davinci_2, davinci_i2c_init, davinci_i2c_probe_chip,
|
|
davinci_i2c_read, davinci_i2c_write,
|
|
davinci_i2c_setspeed,
|
|
CONFIG_SYS_DAVINCI_I2C_SPEED2,
|
|
CONFIG_SYS_DAVINCI_I2C_SLAVE2,
|
|
2)
|
|
#endif
|
|
|
|
#else /* CONFIG_DM_I2C */
|
|
|
|
static int davinci_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
|
|
int nmsgs)
|
|
{
|
|
struct i2c_bus *i2c_bus = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
debug("i2c_xfer: %d messages\n", nmsgs);
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
|
|
if (msg->flags & I2C_M_RD) {
|
|
ret = _davinci_i2c_read(i2c_bus->regs, msg->addr,
|
|
0, 0, msg->buf, msg->len);
|
|
} else {
|
|
ret = _davinci_i2c_write(i2c_bus->regs, msg->addr,
|
|
0, 0, msg->buf, msg->len);
|
|
}
|
|
if (ret) {
|
|
debug("i2c_write: error sending\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int davinci_i2c_set_speed(struct udevice *dev, uint speed)
|
|
{
|
|
struct i2c_bus *i2c_bus = dev_get_priv(dev);
|
|
|
|
i2c_bus->speed = speed;
|
|
return _davinci_i2c_setspeed(i2c_bus->regs, speed);
|
|
}
|
|
|
|
static int davinci_i2c_probe(struct udevice *dev)
|
|
{
|
|
struct i2c_bus *i2c_bus = dev_get_priv(dev);
|
|
|
|
i2c_bus->id = dev->seq;
|
|
i2c_bus->regs = dev_read_addr_ptr(dev);
|
|
|
|
i2c_bus->speed = 100000;
|
|
_davinci_i2c_init(i2c_bus->regs, i2c_bus->speed, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_i2c_probe_chip(struct udevice *bus, uint chip_addr,
|
|
uint chip_flags)
|
|
{
|
|
struct i2c_bus *i2c_bus = dev_get_priv(bus);
|
|
|
|
return _davinci_i2c_probe_chip(i2c_bus->regs, chip_addr);
|
|
}
|
|
|
|
static const struct dm_i2c_ops davinci_i2c_ops = {
|
|
.xfer = davinci_i2c_xfer,
|
|
.probe_chip = davinci_i2c_probe_chip,
|
|
.set_bus_speed = davinci_i2c_set_speed,
|
|
};
|
|
|
|
static const struct udevice_id davinci_i2c_ids[] = {
|
|
{ .compatible = "ti,davinci-i2c"},
|
|
{ .compatible = "ti,keystone-i2c"},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_davinci) = {
|
|
.name = "i2c_davinci",
|
|
.id = UCLASS_I2C,
|
|
.of_match = davinci_i2c_ids,
|
|
.probe = davinci_i2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct i2c_bus),
|
|
.ops = &davinci_i2c_ops,
|
|
};
|
|
|
|
#endif /* CONFIG_DM_I2C */
|