mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
ade4ea4d71
This patch refer to linux kernel commit: d8b763e1e79f net/macb: add TX multiqueue support for gem by: Cyrille Pitchen 1. macb driver will check the register to find how many queues support for this chip. 2. Then as we only use queue0 for tx, so we will set up all other queues use a dummy descriptor, which USED bit is set. So those queues are not used. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
787 lines
19 KiB
C
787 lines
19 KiB
C
/*
|
|
* Copyright (C) 2005-2006 Atmel Corporation
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
|
|
/*
|
|
* The u-boot networking stack is a little weird. It seems like the
|
|
* networking core allocates receive buffers up front without any
|
|
* regard to the hardware that's supposed to actually receive those
|
|
* packets.
|
|
*
|
|
* The MACB receives packets into 128-byte receive buffers, so the
|
|
* buffers allocated by the core isn't very practical to use. We'll
|
|
* allocate our own, but we need one such buffer in case a packet
|
|
* wraps around the DMA ring so that we have to copy it.
|
|
*
|
|
* Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
|
|
* configuration header. This way, the core allocates one RX buffer
|
|
* and one TX buffer, each of which can hold a ethernet packet of
|
|
* maximum size.
|
|
*
|
|
* For some reason, the networking core unconditionally specifies a
|
|
* 32-byte packet "alignment" (which really should be called
|
|
* "padding"). MACB shouldn't need that, but we'll refrain from any
|
|
* core modifications here...
|
|
*/
|
|
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
|
|
#include <linux/mii.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma-mapping.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm-generic/errno.h>
|
|
|
|
#include "macb.h"
|
|
|
|
#define MACB_RX_BUFFER_SIZE 4096
|
|
#define MACB_RX_RING_SIZE (MACB_RX_BUFFER_SIZE / 128)
|
|
#define MACB_TX_RING_SIZE 16
|
|
#define MACB_TX_TIMEOUT 1000
|
|
#define MACB_AUTONEG_TIMEOUT 5000000
|
|
|
|
struct macb_dma_desc {
|
|
u32 addr;
|
|
u32 ctrl;
|
|
};
|
|
|
|
#define DMA_DESC_BYTES(n) (n * sizeof(struct macb_dma_desc))
|
|
#define MACB_TX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_TX_RING_SIZE))
|
|
#define MACB_RX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_RX_RING_SIZE))
|
|
#define MACB_TX_DUMMY_DMA_DESC_SIZE (DMA_DESC_BYTES(1))
|
|
|
|
#define RXADDR_USED 0x00000001
|
|
#define RXADDR_WRAP 0x00000002
|
|
|
|
#define RXBUF_FRMLEN_MASK 0x00000fff
|
|
#define RXBUF_FRAME_START 0x00004000
|
|
#define RXBUF_FRAME_END 0x00008000
|
|
#define RXBUF_TYPEID_MATCH 0x00400000
|
|
#define RXBUF_ADDR4_MATCH 0x00800000
|
|
#define RXBUF_ADDR3_MATCH 0x01000000
|
|
#define RXBUF_ADDR2_MATCH 0x02000000
|
|
#define RXBUF_ADDR1_MATCH 0x04000000
|
|
#define RXBUF_BROADCAST 0x80000000
|
|
|
|
#define TXBUF_FRMLEN_MASK 0x000007ff
|
|
#define TXBUF_FRAME_END 0x00008000
|
|
#define TXBUF_NOCRC 0x00010000
|
|
#define TXBUF_EXHAUSTED 0x08000000
|
|
#define TXBUF_UNDERRUN 0x10000000
|
|
#define TXBUF_MAXRETRY 0x20000000
|
|
#define TXBUF_WRAP 0x40000000
|
|
#define TXBUF_USED 0x80000000
|
|
|
|
struct macb_device {
|
|
void *regs;
|
|
|
|
unsigned int rx_tail;
|
|
unsigned int tx_head;
|
|
unsigned int tx_tail;
|
|
|
|
void *rx_buffer;
|
|
void *tx_buffer;
|
|
struct macb_dma_desc *rx_ring;
|
|
struct macb_dma_desc *tx_ring;
|
|
|
|
unsigned long rx_buffer_dma;
|
|
unsigned long rx_ring_dma;
|
|
unsigned long tx_ring_dma;
|
|
|
|
struct macb_dma_desc *dummy_desc;
|
|
unsigned long dummy_desc_dma;
|
|
|
|
const struct device *dev;
|
|
struct eth_device netdev;
|
|
unsigned short phy_addr;
|
|
struct mii_dev *bus;
|
|
};
|
|
#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
|
|
|
|
static int macb_is_gem(struct macb_device *macb)
|
|
{
|
|
return MACB_BFEXT(IDNUM, macb_readl(macb, MID)) == 0x2;
|
|
}
|
|
|
|
static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
|
|
{
|
|
unsigned long netctl;
|
|
unsigned long netstat;
|
|
unsigned long frame;
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl |= MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
frame = (MACB_BF(SOF, 1)
|
|
| MACB_BF(RW, 1)
|
|
| MACB_BF(PHYA, macb->phy_addr)
|
|
| MACB_BF(REGA, reg)
|
|
| MACB_BF(CODE, 2)
|
|
| MACB_BF(DATA, value));
|
|
macb_writel(macb, MAN, frame);
|
|
|
|
do {
|
|
netstat = macb_readl(macb, NSR);
|
|
} while (!(netstat & MACB_BIT(IDLE)));
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl &= ~MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
}
|
|
|
|
static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
|
|
{
|
|
unsigned long netctl;
|
|
unsigned long netstat;
|
|
unsigned long frame;
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl |= MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
frame = (MACB_BF(SOF, 1)
|
|
| MACB_BF(RW, 2)
|
|
| MACB_BF(PHYA, macb->phy_addr)
|
|
| MACB_BF(REGA, reg)
|
|
| MACB_BF(CODE, 2));
|
|
macb_writel(macb, MAN, frame);
|
|
|
|
do {
|
|
netstat = macb_readl(macb, NSR);
|
|
} while (!(netstat & MACB_BIT(IDLE)));
|
|
|
|
frame = macb_readl(macb, MAN);
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl &= ~MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
return MACB_BFEXT(DATA, frame);
|
|
}
|
|
|
|
void __weak arch_get_mdio_control(const char *name)
|
|
{
|
|
return;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
|
|
|
|
int macb_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
|
|
{
|
|
struct eth_device *dev = eth_get_dev_by_name(devname);
|
|
struct macb_device *macb = to_macb(dev);
|
|
|
|
if (macb->phy_addr != phy_adr)
|
|
return -1;
|
|
|
|
arch_get_mdio_control(devname);
|
|
*value = macb_mdio_read(macb, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int macb_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
|
|
{
|
|
struct eth_device *dev = eth_get_dev_by_name(devname);
|
|
struct macb_device *macb = to_macb(dev);
|
|
|
|
if (macb->phy_addr != phy_adr)
|
|
return -1;
|
|
|
|
arch_get_mdio_control(devname);
|
|
macb_mdio_write(macb, reg, value);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define RX 1
|
|
#define TX 0
|
|
static inline void macb_invalidate_ring_desc(struct macb_device *macb, bool rx)
|
|
{
|
|
if (rx)
|
|
invalidate_dcache_range(macb->rx_ring_dma, macb->rx_ring_dma +
|
|
MACB_RX_DMA_DESC_SIZE);
|
|
else
|
|
invalidate_dcache_range(macb->tx_ring_dma, macb->tx_ring_dma +
|
|
MACB_TX_DMA_DESC_SIZE);
|
|
}
|
|
|
|
static inline void macb_flush_ring_desc(struct macb_device *macb, bool rx)
|
|
{
|
|
if (rx)
|
|
flush_dcache_range(macb->rx_ring_dma, macb->rx_ring_dma +
|
|
MACB_RX_DMA_DESC_SIZE);
|
|
else
|
|
flush_dcache_range(macb->tx_ring_dma, macb->tx_ring_dma +
|
|
MACB_TX_DMA_DESC_SIZE);
|
|
}
|
|
|
|
static inline void macb_flush_rx_buffer(struct macb_device *macb)
|
|
{
|
|
flush_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
|
|
MACB_RX_BUFFER_SIZE);
|
|
}
|
|
|
|
static inline void macb_invalidate_rx_buffer(struct macb_device *macb)
|
|
{
|
|
invalidate_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
|
|
MACB_RX_BUFFER_SIZE);
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
|
|
static int macb_send(struct eth_device *netdev, void *packet, int length)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
unsigned long paddr, ctrl;
|
|
unsigned int tx_head = macb->tx_head;
|
|
int i;
|
|
|
|
paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
|
|
|
|
ctrl = length & TXBUF_FRMLEN_MASK;
|
|
ctrl |= TXBUF_FRAME_END;
|
|
if (tx_head == (MACB_TX_RING_SIZE - 1)) {
|
|
ctrl |= TXBUF_WRAP;
|
|
macb->tx_head = 0;
|
|
} else {
|
|
macb->tx_head++;
|
|
}
|
|
|
|
macb->tx_ring[tx_head].ctrl = ctrl;
|
|
macb->tx_ring[tx_head].addr = paddr;
|
|
barrier();
|
|
macb_flush_ring_desc(macb, TX);
|
|
/* Do we need check paddr and length is dcache line aligned? */
|
|
flush_dcache_range(paddr, paddr + length);
|
|
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
|
|
|
|
/*
|
|
* I guess this is necessary because the networking core may
|
|
* re-use the transmit buffer as soon as we return...
|
|
*/
|
|
for (i = 0; i <= MACB_TX_TIMEOUT; i++) {
|
|
barrier();
|
|
macb_invalidate_ring_desc(macb, TX);
|
|
ctrl = macb->tx_ring[tx_head].ctrl;
|
|
if (ctrl & TXBUF_USED)
|
|
break;
|
|
udelay(1);
|
|
}
|
|
|
|
dma_unmap_single(packet, length, paddr);
|
|
|
|
if (i <= MACB_TX_TIMEOUT) {
|
|
if (ctrl & TXBUF_UNDERRUN)
|
|
printf("%s: TX underrun\n", netdev->name);
|
|
if (ctrl & TXBUF_EXHAUSTED)
|
|
printf("%s: TX buffers exhausted in mid frame\n",
|
|
netdev->name);
|
|
} else {
|
|
printf("%s: TX timeout\n", netdev->name);
|
|
}
|
|
|
|
/* No one cares anyway */
|
|
return 0;
|
|
}
|
|
|
|
static void reclaim_rx_buffers(struct macb_device *macb,
|
|
unsigned int new_tail)
|
|
{
|
|
unsigned int i;
|
|
|
|
i = macb->rx_tail;
|
|
|
|
macb_invalidate_ring_desc(macb, RX);
|
|
while (i > new_tail) {
|
|
macb->rx_ring[i].addr &= ~RXADDR_USED;
|
|
i++;
|
|
if (i > MACB_RX_RING_SIZE)
|
|
i = 0;
|
|
}
|
|
|
|
while (i < new_tail) {
|
|
macb->rx_ring[i].addr &= ~RXADDR_USED;
|
|
i++;
|
|
}
|
|
|
|
barrier();
|
|
macb_flush_ring_desc(macb, RX);
|
|
macb->rx_tail = new_tail;
|
|
}
|
|
|
|
static int macb_recv(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
unsigned int rx_tail = macb->rx_tail;
|
|
void *buffer;
|
|
int length;
|
|
int wrapped = 0;
|
|
u32 status;
|
|
|
|
for (;;) {
|
|
macb_invalidate_ring_desc(macb, RX);
|
|
|
|
if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED))
|
|
return -1;
|
|
|
|
status = macb->rx_ring[rx_tail].ctrl;
|
|
if (status & RXBUF_FRAME_START) {
|
|
if (rx_tail != macb->rx_tail)
|
|
reclaim_rx_buffers(macb, rx_tail);
|
|
wrapped = 0;
|
|
}
|
|
|
|
if (status & RXBUF_FRAME_END) {
|
|
buffer = macb->rx_buffer + 128 * macb->rx_tail;
|
|
length = status & RXBUF_FRMLEN_MASK;
|
|
|
|
macb_invalidate_rx_buffer(macb);
|
|
if (wrapped) {
|
|
unsigned int headlen, taillen;
|
|
|
|
headlen = 128 * (MACB_RX_RING_SIZE
|
|
- macb->rx_tail);
|
|
taillen = length - headlen;
|
|
memcpy((void *)net_rx_packets[0],
|
|
buffer, headlen);
|
|
memcpy((void *)net_rx_packets[0] + headlen,
|
|
macb->rx_buffer, taillen);
|
|
buffer = (void *)net_rx_packets[0];
|
|
}
|
|
|
|
net_process_received_packet(buffer, length);
|
|
if (++rx_tail >= MACB_RX_RING_SIZE)
|
|
rx_tail = 0;
|
|
reclaim_rx_buffers(macb, rx_tail);
|
|
} else {
|
|
if (++rx_tail >= MACB_RX_RING_SIZE) {
|
|
wrapped = 1;
|
|
rx_tail = 0;
|
|
}
|
|
}
|
|
barrier();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void macb_phy_reset(struct macb_device *macb)
|
|
{
|
|
struct eth_device *netdev = &macb->netdev;
|
|
int i;
|
|
u16 status, adv;
|
|
|
|
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
|
|
macb_mdio_write(macb, MII_ADVERTISE, adv);
|
|
printf("%s: Starting autonegotiation...\n", netdev->name);
|
|
macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
|
|
| BMCR_ANRESTART));
|
|
|
|
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
printf("%s: Autonegotiation complete\n", netdev->name);
|
|
else
|
|
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
|
|
netdev->name, status);
|
|
}
|
|
|
|
#ifdef CONFIG_MACB_SEARCH_PHY
|
|
static int macb_phy_find(struct macb_device *macb)
|
|
{
|
|
int i;
|
|
u16 phy_id;
|
|
|
|
/* Search for PHY... */
|
|
for (i = 0; i < 32; i++) {
|
|
macb->phy_addr = i;
|
|
phy_id = macb_mdio_read(macb, MII_PHYSID1);
|
|
if (phy_id != 0xffff) {
|
|
printf("%s: PHY present at %d\n", macb->netdev.name, i);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* PHY isn't up to snuff */
|
|
printf("%s: PHY not found\n", macb->netdev.name);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_MACB_SEARCH_PHY */
|
|
|
|
|
|
static int macb_phy_init(struct macb_device *macb)
|
|
{
|
|
struct eth_device *netdev = &macb->netdev;
|
|
#ifdef CONFIG_PHYLIB
|
|
struct phy_device *phydev;
|
|
#endif
|
|
u32 ncfgr;
|
|
u16 phy_id, status, adv, lpa;
|
|
int media, speed, duplex;
|
|
int i;
|
|
|
|
arch_get_mdio_control(netdev->name);
|
|
#ifdef CONFIG_MACB_SEARCH_PHY
|
|
/* Auto-detect phy_addr */
|
|
if (!macb_phy_find(macb))
|
|
return 0;
|
|
#endif /* CONFIG_MACB_SEARCH_PHY */
|
|
|
|
/* Check if the PHY is up to snuff... */
|
|
phy_id = macb_mdio_read(macb, MII_PHYSID1);
|
|
if (phy_id == 0xffff) {
|
|
printf("%s: No PHY present\n", netdev->name);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
/* need to consider other phy interface mode */
|
|
phydev = phy_connect(macb->bus, macb->phy_addr, netdev,
|
|
PHY_INTERFACE_MODE_RGMII);
|
|
if (!phydev) {
|
|
printf("phy_connect failed\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy_config(phydev);
|
|
#endif
|
|
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
/* Try to re-negotiate if we don't have link already. */
|
|
macb_phy_reset(macb);
|
|
|
|
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (status & BMSR_LSTATUS)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
printf("%s: link down (status: 0x%04x)\n",
|
|
netdev->name, status);
|
|
return 0;
|
|
}
|
|
|
|
/* First check for GMAC */
|
|
if (macb_is_gem(macb)) {
|
|
lpa = macb_mdio_read(macb, MII_STAT1000);
|
|
|
|
if (lpa & (LPA_1000FULL | LPA_1000HALF)) {
|
|
duplex = ((lpa & LPA_1000FULL) ? 1 : 0);
|
|
|
|
printf("%s: link up, 1000Mbps %s-duplex (lpa: 0x%04x)\n",
|
|
netdev->name,
|
|
duplex ? "full" : "half",
|
|
lpa);
|
|
|
|
ncfgr = macb_readl(macb, NCFGR);
|
|
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
|
|
ncfgr |= GEM_BIT(GBE);
|
|
|
|
if (duplex)
|
|
ncfgr |= MACB_BIT(FD);
|
|
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* fall back for EMAC checking */
|
|
adv = macb_mdio_read(macb, MII_ADVERTISE);
|
|
lpa = macb_mdio_read(macb, MII_LPA);
|
|
media = mii_nway_result(lpa & adv);
|
|
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
|
|
? 1 : 0);
|
|
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
|
|
printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
|
|
netdev->name,
|
|
speed ? "100" : "10",
|
|
duplex ? "full" : "half",
|
|
lpa);
|
|
|
|
ncfgr = macb_readl(macb, NCFGR);
|
|
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD) | GEM_BIT(GBE));
|
|
if (speed)
|
|
ncfgr |= MACB_BIT(SPD);
|
|
if (duplex)
|
|
ncfgr |= MACB_BIT(FD);
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int gmac_init_multi_queues(struct macb_device *macb)
|
|
{
|
|
int i, num_queues = 1;
|
|
u32 queue_mask;
|
|
|
|
/* bit 0 is never set but queue 0 always exists */
|
|
queue_mask = gem_readl(macb, DCFG6) & 0xff;
|
|
queue_mask |= 0x1;
|
|
|
|
for (i = 1; i < MACB_MAX_QUEUES; i++)
|
|
if (queue_mask & (1 << i))
|
|
num_queues++;
|
|
|
|
macb->dummy_desc->ctrl = TXBUF_USED;
|
|
macb->dummy_desc->addr = 0;
|
|
flush_dcache_range(macb->dummy_desc_dma, macb->dummy_desc_dma +
|
|
MACB_TX_DUMMY_DMA_DESC_SIZE);
|
|
|
|
for (i = 1; i < num_queues; i++)
|
|
gem_writel_queue_TBQP(macb, macb->dummy_desc_dma, i - 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int macb_init(struct eth_device *netdev, bd_t *bd)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
unsigned long paddr;
|
|
int i;
|
|
|
|
/*
|
|
* macb_halt should have been called at some point before now,
|
|
* so we'll assume the controller is idle.
|
|
*/
|
|
|
|
/* initialize DMA descriptors */
|
|
paddr = macb->rx_buffer_dma;
|
|
for (i = 0; i < MACB_RX_RING_SIZE; i++) {
|
|
if (i == (MACB_RX_RING_SIZE - 1))
|
|
paddr |= RXADDR_WRAP;
|
|
macb->rx_ring[i].addr = paddr;
|
|
macb->rx_ring[i].ctrl = 0;
|
|
paddr += 128;
|
|
}
|
|
macb_flush_ring_desc(macb, RX);
|
|
macb_flush_rx_buffer(macb);
|
|
|
|
for (i = 0; i < MACB_TX_RING_SIZE; i++) {
|
|
macb->tx_ring[i].addr = 0;
|
|
if (i == (MACB_TX_RING_SIZE - 1))
|
|
macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
|
|
else
|
|
macb->tx_ring[i].ctrl = TXBUF_USED;
|
|
}
|
|
macb_flush_ring_desc(macb, TX);
|
|
|
|
macb->rx_tail = 0;
|
|
macb->tx_head = 0;
|
|
macb->tx_tail = 0;
|
|
|
|
macb_writel(macb, RBQP, macb->rx_ring_dma);
|
|
macb_writel(macb, TBQP, macb->tx_ring_dma);
|
|
|
|
if (macb_is_gem(macb)) {
|
|
/* Check the multi queue and initialize the queue for tx */
|
|
gmac_init_multi_queues(macb);
|
|
|
|
/*
|
|
* When the GMAC IP with GE feature, this bit is used to
|
|
* select interface between RGMII and GMII.
|
|
* When the GMAC IP without GE feature, this bit is used
|
|
* to select interface between RMII and MII.
|
|
*/
|
|
#if defined(CONFIG_RGMII) || defined(CONFIG_RMII)
|
|
gem_writel(macb, UR, GEM_BIT(RGMII));
|
|
#else
|
|
gem_writel(macb, UR, 0);
|
|
#endif
|
|
} else {
|
|
/* choose RMII or MII mode. This depends on the board */
|
|
#ifdef CONFIG_RMII
|
|
#ifdef CONFIG_AT91FAMILY
|
|
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
|
|
#else
|
|
macb_writel(macb, USRIO, 0);
|
|
#endif
|
|
#else
|
|
#ifdef CONFIG_AT91FAMILY
|
|
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
|
|
#else
|
|
macb_writel(macb, USRIO, MACB_BIT(MII));
|
|
#endif
|
|
#endif /* CONFIG_RMII */
|
|
}
|
|
|
|
if (!macb_phy_init(macb))
|
|
return -1;
|
|
|
|
/* Enable TX and RX */
|
|
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void macb_halt(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
u32 ncr, tsr;
|
|
|
|
/* Halt the controller and wait for any ongoing transmission to end. */
|
|
ncr = macb_readl(macb, NCR);
|
|
ncr |= MACB_BIT(THALT);
|
|
macb_writel(macb, NCR, ncr);
|
|
|
|
do {
|
|
tsr = macb_readl(macb, TSR);
|
|
} while (tsr & MACB_BIT(TGO));
|
|
|
|
/* Disable TX and RX, and clear statistics */
|
|
macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
|
|
}
|
|
|
|
static int macb_write_hwaddr(struct eth_device *dev)
|
|
{
|
|
struct macb_device *macb = to_macb(dev);
|
|
u32 hwaddr_bottom;
|
|
u16 hwaddr_top;
|
|
|
|
/* set hardware address */
|
|
hwaddr_bottom = dev->enetaddr[0] | dev->enetaddr[1] << 8 |
|
|
dev->enetaddr[2] << 16 | dev->enetaddr[3] << 24;
|
|
macb_writel(macb, SA1B, hwaddr_bottom);
|
|
hwaddr_top = dev->enetaddr[4] | dev->enetaddr[5] << 8;
|
|
macb_writel(macb, SA1T, hwaddr_top);
|
|
return 0;
|
|
}
|
|
|
|
static u32 macb_mdc_clk_div(int id, struct macb_device *macb)
|
|
{
|
|
u32 config;
|
|
unsigned long macb_hz = get_macb_pclk_rate(id);
|
|
|
|
if (macb_hz < 20000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV8);
|
|
else if (macb_hz < 40000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV16);
|
|
else if (macb_hz < 80000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV32);
|
|
else
|
|
config = MACB_BF(CLK, MACB_CLK_DIV64);
|
|
|
|
return config;
|
|
}
|
|
|
|
static u32 gem_mdc_clk_div(int id, struct macb_device *macb)
|
|
{
|
|
u32 config;
|
|
unsigned long macb_hz = get_macb_pclk_rate(id);
|
|
|
|
if (macb_hz < 20000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV8);
|
|
else if (macb_hz < 40000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV16);
|
|
else if (macb_hz < 80000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV32);
|
|
else if (macb_hz < 120000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV48);
|
|
else if (macb_hz < 160000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV64);
|
|
else
|
|
config = GEM_BF(CLK, GEM_CLK_DIV96);
|
|
|
|
return config;
|
|
}
|
|
|
|
/*
|
|
* Get the DMA bus width field of the network configuration register that we
|
|
* should program. We find the width from decoding the design configuration
|
|
* register to find the maximum supported data bus width.
|
|
*/
|
|
static u32 macb_dbw(struct macb_device *macb)
|
|
{
|
|
switch (GEM_BFEXT(DBWDEF, gem_readl(macb, DCFG1))) {
|
|
case 4:
|
|
return GEM_BF(DBW, GEM_DBW128);
|
|
case 2:
|
|
return GEM_BF(DBW, GEM_DBW64);
|
|
case 1:
|
|
default:
|
|
return GEM_BF(DBW, GEM_DBW32);
|
|
}
|
|
}
|
|
|
|
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
|
|
{
|
|
struct macb_device *macb;
|
|
struct eth_device *netdev;
|
|
u32 ncfgr;
|
|
|
|
macb = malloc(sizeof(struct macb_device));
|
|
if (!macb) {
|
|
printf("Error: Failed to allocate memory for MACB%d\n", id);
|
|
return -1;
|
|
}
|
|
memset(macb, 0, sizeof(struct macb_device));
|
|
|
|
netdev = &macb->netdev;
|
|
|
|
macb->rx_buffer = dma_alloc_coherent(MACB_RX_BUFFER_SIZE,
|
|
&macb->rx_buffer_dma);
|
|
macb->rx_ring = dma_alloc_coherent(MACB_RX_DMA_DESC_SIZE,
|
|
&macb->rx_ring_dma);
|
|
macb->tx_ring = dma_alloc_coherent(MACB_TX_DMA_DESC_SIZE,
|
|
&macb->tx_ring_dma);
|
|
macb->dummy_desc = dma_alloc_coherent(MACB_TX_DUMMY_DMA_DESC_SIZE,
|
|
&macb->dummy_desc_dma);
|
|
|
|
/* TODO: we need check the rx/tx_ring_dma is dcache line aligned */
|
|
|
|
macb->regs = regs;
|
|
macb->phy_addr = phy_addr;
|
|
|
|
if (macb_is_gem(macb))
|
|
sprintf(netdev->name, "gmac%d", id);
|
|
else
|
|
sprintf(netdev->name, "macb%d", id);
|
|
|
|
netdev->init = macb_init;
|
|
netdev->halt = macb_halt;
|
|
netdev->send = macb_send;
|
|
netdev->recv = macb_recv;
|
|
netdev->write_hwaddr = macb_write_hwaddr;
|
|
|
|
/*
|
|
* Do some basic initialization so that we at least can talk
|
|
* to the PHY
|
|
*/
|
|
if (macb_is_gem(macb)) {
|
|
ncfgr = gem_mdc_clk_div(id, macb);
|
|
ncfgr |= macb_dbw(macb);
|
|
} else {
|
|
ncfgr = macb_mdc_clk_div(id, macb);
|
|
}
|
|
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
|
|
eth_register(netdev);
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
|
|
miiphy_register(netdev->name, macb_miiphy_read, macb_miiphy_write);
|
|
macb->bus = miiphy_get_dev_by_name(netdev->name);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#endif
|