Stefan Brüns 25612f23b5 usb: dwc2: Do not mix data toggle for IN and OUT endpoints, check bounds ... USB protocol allows for 16 IN and 16 OUT endpoints (USB 2.0 Spec, 8.3.2.2 Endpoint Field). A function may have an EP 1 for both IN and OUT, so these two should be kept separate. As EPs are either BULK or INTERRUPT (or ISO), it is fine to have one array per direction for all transfer types (also see e236519b73). USB device address is 7 bits, so a bus may have more than 16 devices. Check the device number, as the DWC2 driver only supports BULK/ISO for the first 16 devices. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>		2016-01-23 16:21:11 +01:00
..
dwc2.c	usb: dwc2: Do not mix data toggle for IN and OUT endpoints, check bounds	2016-01-23 16:21:11 +01:00
dwc2.h	usb: dwc2: Add SPLIT INTERRUPT transaction support	2016-01-23 16:21:11 +01:00
ehci-armada100.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-atmel.c	USB: ehci-atmel: use pcr to enable or disable clock	2014-09-19 00:11:21 +02:00
ehci-exynos.c	usb: host: ehci: samsung: Move hcor initialization after usb phy setup	2015-12-17 21:54:41 +01:00
ehci-faraday.c	dm: usb: Drop the EHCI weak functions	2015-04-18 11:11:24 -06:00
ehci-fsl.c	drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect	2015-06-07 15:46:02 +02:00
ehci-generic.c	usb: add support for generic EHCI devices	2015-12-07 00:14:59 +01:00
ehci-hcd.c	usb: Move determination of TT hub address/port into separate function	2015-12-31 16:16:29 +01:00
ehci-marvell.c	usb: ehci-marvell.c: Add DM support	2015-10-21 02:25:01 +02:00
ehci-mpc512x.c	powerpc/usb:Differentiate USB controller base address	2013-10-24 09:35:09 -07:00
ehci-mx5.c	dm: usb: Drop the EHCI weak functions	2015-04-18 11:11:24 -06:00
ehci-mx6.c	imx: usb: ehci-mx6: wait_for_bit to check reg status	2015-08-19 22:30:20 +02:00
ehci-mxc.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-mxs.c	usb: ehci: mxs: Add board-specific callbacks	2014-09-29 09:02:16 +02:00
ehci-omap.c	usb: ehci-omap: Reset the USB Host OMAP module	2013-12-06 07:02:32 -05:00
ehci-pci.c	dm: usb: Convert echi-pci to use new DM PCI API	2016-01-12 10:19:09 -07:00
ehci-ppc4xx.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-rmobile.c	usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT	2014-11-07 16:32:02 +01:00
ehci-spear.c	usb: spear: Add support for both SPEAr600 EHCI controllers	2015-08-19 22:30:20 +02:00
ehci-sunxi.c	sunxi: usb: Rename the sunxi usb driver DM entry	2015-12-07 00:14:59 +01:00
ehci-tegra.c	dm: Use dev_get_addr() where possible	2015-08-31 07:57:26 -06:00
ehci-uniphier.c	ARM: UniPhier: replace <asm/io.h> with <linux/io.h>	2015-05-31 02:53:56 +09:00
ehci-vct.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-vf.c	usb: host: ehci-vf: Implement board_usb_phy_mode weak function	2016-01-16 07:06:55 +01:00
ehci-zynq.c	ARM: zynq: ehci: Added USB host driver support	2014-05-14 07:43:35 +02:00
ehci.h	usb: ehci: remember init mode	2015-09-07 13:41:05 +02:00
isp116x-hcd.c	include: move various macros to include/linux/kernel.h	2014-11-20 11:28:25 -05:00
isp116x.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
Kconfig	usb: add support of generic OHCI devices	2015-12-17 21:54:41 +01:00
Makefile	usb: add support of generic OHCI devices	2015-12-17 21:54:41 +01:00
ohci-at91.c	USB: ohci-at91: use pcr to enable or disable clock	2014-09-19 00:11:20 +02:00
ohci-da8xx.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
ohci-ep93xx.c	arm: ep9315: Return back Cirrus Logic EDB9315A board support	2014-07-04 23:45:48 +02:00
ohci-generic.c	usb: add support of generic OHCI devices	2015-12-17 21:54:41 +01:00
ohci-hcd.c	ohci: Add missing cache-flush for hcca area	2015-11-03 17:29:33 +01:00
ohci-lpc32xx.c	usb: lpc32xx: add host USB driver	2015-08-18 13:45:57 -04:00
ohci-s3c24xx.c	include: move various macros to include/linux/kernel.h	2014-11-20 11:28:25 -05:00
ohci-s3c24xx.h	dm: Move s3c24xx USB driver to a proper place	2012-10-18 06:54:18 +02:00
ohci-sunxi.c	sunxi: usb-phy: Never power off the usb ports	2015-08-08 16:26:19 +02:00
ohci.h	usb: ohci: enable cache support	2015-08-12 20:47:48 -04:00
r8a66597-hcd.c	Move console definitions into a new console.h file	2015-11-19 20:27:50 -07:00
r8a66597.h	usb: Update some EHCI driver licenses to use SPDX	2015-07-21 17:39:38 -06:00
sl811-hcd.c	usb: add enum usb_init_type parameter to usb_lowlevel_init	2013-10-20 23:45:26 +02:00
sl811.h	drivers/usb: regorganisation	2009-04-06 20:40:46 +02:00
usb-sandbox.c	usb: sandbox: Add support for interrupt operations	2015-11-19 20:27:52 -07:00
usb-uclass.c	dm: usb: Remove inactive children after a bus scan	2015-11-19 20:27:52 -07:00
utmi-armada100.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
xhci-dwc3.c	usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook	2015-12-07 00:15:00 +01:00
xhci-exynos5.c	dm: Use dev_get_addr() where possible	2015-08-31 07:57:26 -06:00
xhci-fsl.c	usb: xhci: fsl: Removing unused function usb_phy_reset	2015-12-07 00:15:00 +01:00
xhci-keystone.c	usb: xhci: keystone: Remove common dwc3 drv functions calls	2015-07-22 08:55:44 +02:00
xhci-mem.c	dm: usb: Support driver model in XHCI	2015-04-18 11:11:28 -06:00
xhci-omap.c	usb: host: xhci-omap: fix build break	2015-12-07 00:14:59 +01:00
xhci-pci.c	usb: pci: Add XHCI driver for PCI	2015-02-05 22:16:42 -07:00
xhci-ring.c	dm: usb: xhci: Use a function to get xhci_ctrl	2015-04-18 11:11:28 -06:00
xhci-uniphier.c	ARM: UniPhier: replace <asm/io.h> with <linux/io.h>	2015-05-31 02:53:56 +09:00
xhci-zynqmp.c	usb: xhci: zynqmp: Removing unused function usb_phy_reset	2015-12-07 00:15:00 +01:00
xhci.c	dm: Rename dev_get_parentdata() to dev_get_parent_priv()	2015-10-23 09:42:28 -06:00
xhci.h	dm: usb: Support driver model in XHCI	2015-04-18 11:11:28 -06:00