u-boot/board/ait/cam_enc_4xx/cam_enc_4xx.c
Heiko Schocher 4dd834906d arm, davinci: add cam_enc_4xx support
- DM368 SOC
- booting with spl not with UBL from TI
- before loading u-boot from NAND into RAM, test
  the RAM with the post memory test. If error
  is found, switch all LEDs on and halt system.
- SPI Flash
  Dataflash Typ: M25PE80
- Ethernet DM9161BI
- MMC
- USB

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-03 22:56:25 +01:00

446 lines
10 KiB
C

/*
* Copyright (C) 2009 Texas Instruments Incorporated
*
* Copyright (C) 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <common.h>
#include <linux/mtd/nand.h>
#include <nand.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/nand_defs.h>
#include <asm/arch/davinci_misc.h>
#ifdef CONFIG_DAVINCI_MMC
#include <mmc.h>
#include <asm/arch/sdmmc_defs.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SPL_BUILD
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
}
static struct davinci_timer *timer =
(struct davinci_timer *)DAVINCI_TIMER3_BASE;
static unsigned long get_timer_val(void)
{
unsigned long now = readl(&timer->tim34);
return now;
}
static void stop_timer(void)
{
writel(0x0, &timer->tcr);
return;
}
int checkboard(void)
{
printf("Board: AIT CAM ENC 4XX\n");
return 0;
}
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
#ifdef CONFIG_DRIVER_TI_EMAC
int board_eth_init(bd_t *bis)
{
davinci_emac_initialize();
return 0;
}
#endif
#ifdef CONFIG_NAND_DAVINCI
static int
davinci_std_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
{
struct nand_chip *this = mtd->priv;
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *oob = chip->oob_poi;
chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
chip->read_buf(mtd, oob, mtd->oobsize);
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, page & this->pagemask);
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
int stat;
chip->ecc.hwctl(mtd, NAND_ECC_READ);
chip->read_buf(mtd, p, eccsize);
chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
if (chip->ecc.prepad)
oob += chip->ecc.prepad;
stat = chip->ecc.correct(mtd, p, oob, NULL);
if (stat == -1)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
oob += eccbytes;
if (chip->ecc.postpad)
oob += chip->ecc.postpad;
}
/* Calculate remaining oob bytes */
i = mtd->oobsize - (oob - chip->oob_poi);
if (i)
chip->read_buf(mtd, oob, i);
return 0;
}
static void davinci_std_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf)
{
unsigned char davinci_ecc_buf[NAND_MAX_OOBSIZE];
struct nand_chip *this = mtd->priv;
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
int offset = 0;
const uint8_t *p = buf;
uint8_t *oob = chip->oob_poi;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
chip->write_buf(mtd, p, eccsize);
/* Calculate ECC without prepad */
chip->ecc.calculate(mtd, p, oob + chip->ecc.prepad);
if (chip->ecc.prepad) {
offset = (chip->ecc.steps - eccsteps) * chunk;
memcpy(&davinci_ecc_buf[offset], oob, chip->ecc.prepad);
oob += chip->ecc.prepad;
}
offset = ((chip->ecc.steps - eccsteps) * chunk) +
chip->ecc.prepad;
memcpy(&davinci_ecc_buf[offset], oob, eccbytes);
oob += eccbytes;
if (chip->ecc.postpad) {
offset = ((chip->ecc.steps - eccsteps) * chunk) +
chip->ecc.prepad + eccbytes;
memcpy(&davinci_ecc_buf[offset], oob,
chip->ecc.postpad);
oob += chip->ecc.postpad;
}
}
/*
* Write the sparebytes into the page once
* all eccsteps have been covered
*/
for (i = 0; i < mtd->oobsize; i++)
writeb(davinci_ecc_buf[i], this->IO_ADDR_W);
/* Calculate remaining oob bytes */
i = mtd->oobsize - (oob - chip->oob_poi);
if (i)
chip->write_buf(mtd, oob, i);
}
static int davinci_std_write_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, int page)
{
int pos, status = 0;
const uint8_t *bufpoi = chip->oob_poi;
pos = mtd->writesize;
chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
chip->write_buf(mtd, bufpoi, mtd->oobsize);
chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
status = chip->waitfunc(mtd, chip);
return status & NAND_STATUS_FAIL ? -1 : 0;
}
static int davinci_std_read_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, int page, int sndcmd)
{
struct nand_chip *this = mtd->priv;
uint8_t *buf = chip->oob_poi;
uint8_t *bufpoi = buf;
chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
chip->read_buf(mtd, bufpoi, mtd->oobsize);
return 1;
}
static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
{
struct nand_chip *this = mtd->priv;
unsigned long wbase = (unsigned long) this->IO_ADDR_W;
unsigned long rbase = (unsigned long) this->IO_ADDR_R;
if (chip == 1) {
__set_bit(14, &wbase);
__set_bit(14, &rbase);
} else {
__clear_bit(14, &wbase);
__clear_bit(14, &rbase);
}
this->IO_ADDR_W = (void *)wbase;
this->IO_ADDR_R = (void *)rbase;
}
int board_nand_init(struct nand_chip *nand)
{
davinci_nand_init(nand);
nand->select_chip = nand_dm365evm_select_chip;
return 0;
}
struct nand_ecc_ctrl org_ecc;
static int notsaved = 1;
static int nand_switch_hw_func(int mode)
{
struct nand_chip *nand;
struct mtd_info *mtd;
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!nand_info[nand_curr_device].name) {
printf("Error: Can't switch hw functions," \
" no devices available\n");
return -1;
}
mtd = &nand_info[nand_curr_device];
nand = mtd->priv;
if (mode == 0) {
printf("switching to uboot hw functions.\n");
memcpy(&nand->ecc, &org_ecc, sizeof(struct nand_ecc_ctrl));
} else {
/* RBL */
printf("switching to RBL hw functions.\n");
if (notsaved == 1) {
memcpy(&org_ecc, &nand->ecc,
sizeof(struct nand_ecc_ctrl));
notsaved = 0;
}
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.prepad = 6;
nand->ecc.read_page = davinci_std_read_page_syndrome;
nand->ecc.write_page = davinci_std_write_page_syndrome;
nand->ecc.read_oob = davinci_std_read_oob_syndrome;
nand->ecc.write_oob = davinci_std_write_oob_syndrome;
}
return mode;
}
static int hwmode;
static int do_switch_ecc(cmd_tbl_t *cmdtp, int flag, int argc,
char *const argv[])
{
if (argc != 2)
goto usage;
if (strncmp(argv[1], "rbl", 2) == 0)
hwmode = nand_switch_hw_func(1);
else if (strncmp(argv[1], "uboot", 2) == 0)
hwmode = nand_switch_hw_func(0);
else
goto usage;
return 0;
usage:
printf("Usage: nandrbl %s\n", cmdtp->usage);
return 1;
}
U_BOOT_CMD(
nandrbl, 2, 1, do_switch_ecc,
"switch between rbl/uboot NAND ECC calculation algorithm",
"[rbl/uboot] - Switch between rbl/uboot NAND ECC algorithm"
);
#endif /* #ifdef CONFIG_NAND_DAVINCI */
#ifdef CONFIG_DAVINCI_MMC
static struct davinci_mmc mmc_sd0 = {
.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
.input_clk = 121500000,
.host_caps = MMC_MODE_4BIT,
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
.version = MMC_CTLR_VERSION_2,
};
int board_mmc_init(bd_t *bis)
{
int err;
/* Add slot-0 to mmc subsystem */
err = davinci_mmc_init(bis, &mmc_sd0);
return err;
}
#endif
int board_late_init(void)
{
struct davinci_gpio *gpio = davinci_gpio_bank45;
/* 24MHz InputClock / 15 prediv -> 1.6 MHz timer running */
while (get_timer_val() < 0x186a00)
;
/* 1 sec reached -> stop timer, clear all LED */
stop_timer();
clrbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
return 0;
}
void reset_phy(void)
{
char *name = "GENERIC @ 0x00";
/* reset the phy */
miiphy_reset(name, 0x0);
}
#else /* #ifndef CONFIG_SPL_BUILD */
static void cam_enc_4xx_set_all_led(void)
{
struct davinci_gpio *gpio = davinci_gpio_bank45;
setbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
}
/*
* TIMER 0 is used for tick
*/
static struct davinci_timer *timer =
(struct davinci_timer *)DAVINCI_TIMER3_BASE;
#define TIMER_LOAD_VAL 0xffffffff
#define TIM_CLK_DIV 16
static int cam_enc_4xx_timer_init(void)
{
/* We are using timer34 in unchained 32-bit mode, full speed */
writel(0x0, &timer->tcr);
writel(0x0, &timer->tgcr);
writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr);
writel(0x0, &timer->tim34);
writel(TIMER_LOAD_VAL, &timer->prd34);
writel(2 << 22, &timer->tcr);
return 0;
}
void board_gpio_init(void)
{
struct davinci_gpio *gpio;
cam_enc_4xx_set_all_led();
cam_enc_4xx_timer_init();
gpio = davinci_gpio_bank01;
clrbits_le32(&gpio->dir, ~0xfdfffffe);
/* clear LED D14 = GPIO25 */
clrbits_le32(&gpio->out_data, 0x02000000);
gpio = davinci_gpio_bank23;
clrbits_le32(&gpio->dir, ~0x5ff0afef);
/* set GPIO61 to 1 -> intern UART0 as Console */
setbits_le32(&gpio->out_data, 0x20000000);
/*
* PHY out of reset GIO 50 = 1
* NAND WP off GIO 51 = 1
*/
setbits_le32(&gpio->out_data, 0x000c0004);
gpio = davinci_gpio_bank45;
clrbits_le32(&gpio->dir, ~(0xdb2fffff) | CONFIG_CAM_ENC_LED_MASK);
/*
* clear LED:
* D17 = GPIO86
* D11 = GPIO87
* GPIO88
* GPIO89
* D13 = GPIO90
* GPIO91
*/
clrbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
gpio = davinci_gpio_bank67;
clrbits_le32(&gpio->dir, ~0x000007ff);
}
/*
* functions for the post memory test.
*/
int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
{
*vstart = CONFIG_SYS_SDRAM_BASE;
*size = PHYS_SDRAM_1_SIZE;
*phys_offset = 0;
return 0;
}
void arch_memory_failure_handle(void)
{
cam_enc_4xx_set_all_led();
puts("mem failure\n");
while (1)
;
}
#endif