u-boot/drivers/mtd/nand/nand_ecc.c
Scott Wood 5b8e6bb517 nand: remove dead code and suspend/resume
Get rid of the several "#if 0" sections that were keeping around Linux
code that isn't relevant to U-Boot.  Besides cluttering the code, these
sections make tracking upstream changes harder, rather than easier.
It's easy to discard obviously irrelevant diff hunks that patch rejects,
but it's not as easy to notice hunks that apply cleanly to the #if 0
section, but *are* relevant to U-Boot and require modification elsewhere.

Also remove suspend/resume, as this is not applicable to U-Boot.  Removal
saves 232 bytes on powerpc.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-10-11 15:10:35 -05:00

202 lines
6.7 KiB
C

/*
* This file contains an ECC algorithm from Toshiba that detects and
* corrects 1 bit errors in a 256 byte block of data.
*
* drivers/mtd/nand/nand_ecc.c
*
* Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
* Toshiba America Electronics Components, Inc.
*
* Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
*
* This file is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 or (at your option) any
* later version.
*
* This file is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this file; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* As a special exception, if other files instantiate templates or use
* macros or inline functions from these files, or you compile these
* files and link them with other works to produce a work based on these
* files, these files do not by themselves cause the resulting work to be
* covered by the GNU General Public License. However the source code for
* these files must still be made available in accordance with section (3)
* of the GNU General Public License.
*
* This exception does not invalidate any other reasons why a work based on
* this file might be covered by the GNU General Public License.
*/
#include <common.h>
#include <asm/errno.h>
#include <linux/mtd/mtd.h>
/* The PPC4xx NDFC uses Smart Media (SMC) bytes order */
#ifdef CONFIG_NAND_NDFC
#define CONFIG_MTD_NAND_ECC_SMC
#endif
/*
* NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(),
* only nand_correct_data() is needed
*/
#ifndef CONFIG_NAND_SPL
/*
* Pre-calculated 256-way 1 byte column parity
*/
static const u_char nand_ecc_precalc_table[] = {
0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
};
/**
* nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block
* @mtd: MTD block structure
* @dat: raw data
* @ecc_code: buffer for ECC
*/
int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
int i;
/* Initialize variables */
reg1 = reg2 = reg3 = 0;
/* Build up column parity */
for(i = 0; i < 256; i++) {
/* Get CP0 - CP5 from table */
idx = nand_ecc_precalc_table[*dat++];
reg1 ^= (idx & 0x3f);
/* All bit XOR = 1 ? */
if (idx & 0x40) {
reg3 ^= (uint8_t) i;
reg2 ^= ~((uint8_t) i);
}
}
/* Create non-inverted ECC code from line parity */
tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */
tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */
tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
/* Calculate final ECC code */
#ifdef CONFIG_MTD_NAND_ECC_SMC
ecc_code[0] = ~tmp2;
ecc_code[1] = ~tmp1;
#else
ecc_code[0] = ~tmp1;
ecc_code[1] = ~tmp2;
#endif
ecc_code[2] = ((~reg1) << 2) | 0x03;
return 0;
}
#endif /* CONFIG_NAND_SPL */
static inline int countbits(uint32_t byte)
{
int res = 0;
for (;byte; byte >>= 1)
res += byte & 0x01;
return res;
}
/**
* nand_correct_data - [NAND Interface] Detect and correct bit error(s)
* @mtd: MTD block structure
* @dat: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
*
* Detect and correct a 1 bit error for 256 byte block
*/
int nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
uint8_t s0, s1, s2;
#ifdef CONFIG_MTD_NAND_ECC_SMC
s0 = calc_ecc[0] ^ read_ecc[0];
s1 = calc_ecc[1] ^ read_ecc[1];
s2 = calc_ecc[2] ^ read_ecc[2];
#else
s1 = calc_ecc[0] ^ read_ecc[0];
s0 = calc_ecc[1] ^ read_ecc[1];
s2 = calc_ecc[2] ^ read_ecc[2];
#endif
if ((s0 | s1 | s2) == 0)
return 0;
/* Check for a single bit error */
if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
uint32_t byteoffs, bitnum;
byteoffs = (s1 << 0) & 0x80;
byteoffs |= (s1 << 1) & 0x40;
byteoffs |= (s1 << 2) & 0x20;
byteoffs |= (s1 << 3) & 0x10;
byteoffs |= (s0 >> 4) & 0x08;
byteoffs |= (s0 >> 3) & 0x04;
byteoffs |= (s0 >> 2) & 0x02;
byteoffs |= (s0 >> 1) & 0x01;
bitnum = (s2 >> 5) & 0x04;
bitnum |= (s2 >> 4) & 0x02;
bitnum |= (s2 >> 3) & 0x01;
dat[byteoffs] ^= (1 << bitnum);
return 1;
}
if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
return 1;
return -EBADMSG;
}