u-boot/drivers/net/phy/broadcom.c
Jiandong Zheng 1b564cecc3 net: phy: broadcom: Add BCM Cygnus PHY
Add Ethernet PHY for BCM Cygnus SoC

Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: Steve Rae <srae@broadcom.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-08-11 13:49:17 -05:00

303 lines
7.3 KiB
C

/*
* Broadcom PHY drivers
*
* SPDX-License-Identifier: GPL-2.0+
*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
* author Andy Fleming
*/
#include <config.h>
#include <common.h>
#include <phy.h>
/* Broadcom BCM54xx -- taken from linux sungem_phy */
#define MIIM_BCM54xx_AUXCNTL 0x18
#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) (((val & 0x7) << 12)|(val & 0x7))
#define MIIM_BCM54xx_AUXSTATUS 0x19
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
#define MIIM_BCM54XX_SHD 0x1c
#define MIIM_BCM54XX_SHD_WRITE 0x8000
#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
(MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
MIIM_BCM54XX_SHD_DATA(data))
#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
/* Broadcom BCM5461S */
static int bcm5461_config(struct phy_device *phydev)
{
genphy_config_aneg(phydev);
phy_reset(phydev);
return 0;
}
static int bcm54xx_parse_status(struct phy_device *phydev)
{
unsigned int mii_reg;
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXSTATUS);
switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
case 1:
phydev->duplex = DUPLEX_HALF;
phydev->speed = SPEED_10;
break;
case 2:
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_10;
break;
case 3:
phydev->duplex = DUPLEX_HALF;
phydev->speed = SPEED_100;
break;
case 5:
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_100;
break;
case 6:
phydev->duplex = DUPLEX_HALF;
phydev->speed = SPEED_1000;
break;
case 7:
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_1000;
break;
default:
printf("Auto-neg error, defaulting to 10BT/HD\n");
phydev->duplex = DUPLEX_HALF;
phydev->speed = SPEED_10;
break;
}
return 0;
}
static int bcm54xx_startup(struct phy_device *phydev)
{
/* Read the Status (2x to make sure link is right) */
genphy_update_link(phydev);
bcm54xx_parse_status(phydev);
return 0;
}
/* Broadcom BCM5482S */
/*
* "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
* circumstances. eg a gigabit TSEC connected to a gigabit switch with
* a 4-wire ethernet cable. Both ends advertise gigabit, but can't
* link. "Ethernet@Wirespeed" reduces advertised speed until link
* can be achieved.
*/
static u32 bcm5482_read_wirespeed(struct phy_device *phydev, u32 reg)
{
return (phy_read(phydev, MDIO_DEVAD_NONE, reg) & 0x8FFF) | 0x8010;
}
static int bcm5482_config(struct phy_device *phydev)
{
unsigned int reg;
/* reset the PHY */
reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
reg |= BMCR_RESET;
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg);
/* Setup read from auxilary control shadow register 7 */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL,
MIIM_BCM54xx_AUXCNTL_ENCODE(7));
/* Read Misc Control register and or in Ethernet@Wirespeed */
reg = bcm5482_read_wirespeed(phydev, MIIM_BCM54xx_AUXCNTL);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg);
/* Initial config/enable of secondary SerDes interface */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf));
/* Write intial value to secondary SerDes Contol */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
MIIM_BCM54XX_EXP_SEL_SSD | 0);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA,
BMCR_ANRESTART);
/* Enable copper/fiber auto-detect */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201));
genphy_config_aneg(phydev);
return 0;
}
static int bcm_cygnus_startup(struct phy_device *phydev)
{
/* Read the Status (2x to make sure link is right) */
genphy_update_link(phydev);
genphy_parse_link(phydev);
return 0;
}
static int bcm_cygnus_config(struct phy_device *phydev)
{
genphy_config_aneg(phydev);
phy_reset(phydev);
return 0;
}
/*
* Find out if PHY is in copper or serdes mode by looking at Expansion Reg
* 0x42 - "Operating Mode Status Register"
*/
static int bcm5482_is_serdes(struct phy_device *phydev)
{
u16 val;
int serdes = 0;
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
MIIM_BCM54XX_EXP_SEL_ER | 0x42);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
switch (val & 0x1f) {
case 0x0d: /* RGMII-to-100Base-FX */
case 0x0e: /* RGMII-to-SGMII */
case 0x0f: /* RGMII-to-SerDes */
case 0x12: /* SGMII-to-SerDes */
case 0x13: /* SGMII-to-100Base-FX */
case 0x16: /* SerDes-to-Serdes */
serdes = 1;
break;
case 0x6: /* RGMII-to-Copper */
case 0x14: /* SGMII-to-Copper */
case 0x17: /* SerDes-to-Copper */
break;
default:
printf("ERROR, invalid PHY mode (0x%x\n)", val);
break;
}
return serdes;
}
/*
* Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
* Mode Status Register"
*/
static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev)
{
u16 val;
int i = 0;
/* Wait 1s for link - Clause 37 autonegotiation happens very fast */
while (1) {
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
MIIM_BCM54XX_EXP_SEL_ER | 0x42);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
if (val & 0x8000)
break;
if (i++ > 1000) {
phydev->link = 0;
return 1;
}
udelay(1000); /* 1 ms */
}
phydev->link = 1;
switch ((val >> 13) & 0x3) {
case (0x00):
phydev->speed = 10;
break;
case (0x01):
phydev->speed = 100;
break;
case (0x02):
phydev->speed = 1000;
break;
}
phydev->duplex = (val & 0x1000) == 0x1000;
return 0;
}
/*
* Figure out if BCM5482 is in serdes or copper mode and determine link
* configuration accordingly
*/
static int bcm5482_startup(struct phy_device *phydev)
{
if (bcm5482_is_serdes(phydev)) {
bcm5482_parse_serdes_sr(phydev);
phydev->port = PORT_FIBRE;
} else {
/* Wait for auto-negotiation to complete or fail */
genphy_update_link(phydev);
/* Parse BCM54xx copper aux status register */
bcm54xx_parse_status(phydev);
}
return 0;
}
static struct phy_driver BCM5461S_driver = {
.name = "Broadcom BCM5461S",
.uid = 0x2060c0,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &bcm5461_config,
.startup = &bcm54xx_startup,
.shutdown = &genphy_shutdown,
};
static struct phy_driver BCM5464S_driver = {
.name = "Broadcom BCM5464S",
.uid = 0x2060b0,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &bcm5461_config,
.startup = &bcm54xx_startup,
.shutdown = &genphy_shutdown,
};
static struct phy_driver BCM5482S_driver = {
.name = "Broadcom BCM5482S",
.uid = 0x143bcb0,
.mask = 0xffffff0,
.features = PHY_GBIT_FEATURES,
.config = &bcm5482_config,
.startup = &bcm5482_startup,
.shutdown = &genphy_shutdown,
};
static struct phy_driver BCM_CYGNUS_driver = {
.name = "Broadcom CYGNUS GPHY",
.uid = 0xae025200,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &bcm_cygnus_config,
.startup = &bcm_cygnus_startup,
.shutdown = &genphy_shutdown,
};
int phy_broadcom_init(void)
{
phy_register(&BCM5482S_driver);
phy_register(&BCM5464S_driver);
phy_register(&BCM5461S_driver);
phy_register(&BCM_CYGNUS_driver);
return 0;
}