u-boot/board/xes/common/fsl_8xxx_pci.c
Kumar Gala 6525d51fa5 powerpc/85xx & 86xx: Rework ft_fsl_pci_setup to not require aliases
Previously we used an alias the pci node to determine which node to
fixup or delete.  Now we use the new fdt_node_offset_by_compat_reg to
find the node to update.

Additionally, we replace the code in each board with a single macro call
that makes assumes uniform naming and reduces duplication in this area.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-20 04:40:06 -05:00

403 lines
10 KiB
C

/*
* Copyright 2008 Extreme Engineering Solutions, Inc.
* Copyright 2007-2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
#include <asm/fsl_pci.h>
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
int first_free_busno = 0;
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
#endif
#ifdef CONFIG_PCIE1
static struct pci_controller pcie1_hose;
#endif
#ifdef CONFIG_PCIE2
static struct pci_controller pcie2_hose;
#endif
#ifdef CONFIG_PCIE3
static struct pci_controller pcie3_hose;
#endif
#ifdef CONFIG_MPC8572
/* Correlate host/agent POR bits to usable info. Table 4-14 */
struct host_agent_cfg_t {
uchar pcie_root[3];
uchar rio_host;
} host_agent_cfg[8] = {
{{0, 0, 0}, 0},
{{0, 1, 1}, 1},
{{1, 0, 1}, 0},
{{1, 1, 0}, 1},
{{0, 0, 1}, 0},
{{0, 1, 0}, 1},
{{1, 0, 0}, 0},
{{1, 1, 1}, 1}
};
/* Correlate port width POR bits to usable info. Table 4-15 */
struct io_port_cfg_t {
uchar pcie_width[3];
uchar rio_width;
} io_port_cfg[16] = {
{{0, 0, 0}, 0},
{{0, 0, 0}, 0},
{{4, 0, 0}, 0},
{{4, 4, 0}, 0},
{{0, 0, 0}, 0},
{{0, 0, 0}, 0},
{{0, 0, 0}, 4},
{{4, 2, 2}, 0},
{{0, 0, 0}, 0},
{{0, 0, 0}, 0},
{{0, 0, 0}, 0},
{{4, 0, 0}, 4},
{{4, 0, 0}, 4},
{{0, 0, 0}, 4},
{{0, 0, 0}, 4},
{{8, 0, 0}, 0},
};
#elif defined CONFIG_MPC8548
/* Correlate host/agent POR bits to usable info. Table 4-12 */
struct host_agent_cfg_t {
uchar pci_host[2];
uchar pcie_root[1];
uchar rio_host;
} host_agent_cfg[8] = {
{{1, 1}, {0}, 0},
{{1, 1}, {1}, 0},
{{1, 1}, {0}, 1},
{{0, 0}, {0}, 0}, /* reserved */
{{0, 1}, {1}, 0},
{{1, 1}, {1}, 0},
{{0, 1}, {1}, 1},
{{1, 1}, {1}, 1}
};
/* Correlate port width POR bits to usable info. Table 4-13 */
struct io_port_cfg_t {
uchar pcie_width[1];
uchar rio_width;
} io_port_cfg[8] = {
{{0}, 0},
{{0}, 0},
{{0}, 0},
{{4}, 4},
{{4}, 4},
{{0}, 4},
{{0}, 4},
{{8}, 0},
};
#elif defined CONFIG_MPC86xx
/* Correlate host/agent POR bits to usable info. Table 4-17 */
struct host_agent_cfg_t {
uchar pcie_root[2];
uchar rio_host;
} host_agent_cfg[8] = {
{{0, 0}, 0},
{{1, 0}, 1},
{{0, 1}, 0},
{{1, 1}, 1}
};
/* Correlate port width POR bits to usable info. Table 4-16 */
struct io_port_cfg_t {
uchar pcie_width[2];
uchar rio_width;
} io_port_cfg[16] = {
{{0, 0}, 0},
{{0, 0}, 0},
{{8, 0}, 0},
{{8, 8}, 0},
{{0, 0}, 0},
{{8, 0}, 4},
{{8, 0}, 4},
{{8, 0}, 4},
{{0, 0}, 0},
{{0, 0}, 4},
{{0, 0}, 4},
{{0, 0}, 4},
{{0, 0}, 0},
{{0, 0}, 0},
{{0, 8}, 0},
{{8, 8}, 0},
};
#endif
/*
* 85xx and 86xx share naming conventions, but different layout.
* Correlate names to CPU-specific values to share common
* PCI code.
*/
#if defined(CONFIG_MPC85xx)
#define MPC8xxx_DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE
#define MPC8xxx_DEVDISR_PCIE2 MPC85xx_DEVDISR_PCIE2
#define MPC8xxx_DEVDISR_PCIE3 MPC85xx_DEVDISR_PCIE3
#define MPC8xxx_PORDEVSR_IO_SEL MPC85xx_PORDEVSR_IO_SEL
#define MPC8xxx_PORDEVSR_IO_SEL_SHIFT MPC85xx_PORDEVSR_IO_SEL_SHIFT
#define MPC8xxx_PORBMSR_HA MPC85xx_PORBMSR_HA
#define MPC8xxx_PORBMSR_HA_SHIFT MPC85xx_PORBMSR_HA_SHIFT
#elif defined(CONFIG_MPC86xx)
#define MPC8xxx_DEVDISR_PCIE1 MPC86xx_DEVDISR_PCIEX1
#define MPC8xxx_DEVDISR_PCIE2 MPC86xx_DEVDISR_PCIEX2
#define MPC8xxx_DEVDISR_PCIE3 0 /* 8641 doesn't have PCIe3 */
#define MPC8xxx_PORDEVSR_IO_SEL MPC8641_PORDEVSR_IO_SEL
#define MPC8xxx_PORDEVSR_IO_SEL_SHIFT MPC8641_PORDEVSR_IO_SEL_SHIFT
#define MPC8xxx_PORBMSR_HA MPC8641_PORBMSR_HA
#define MPC8xxx_PORBMSR_HA_SHIFT MPC8641_PORBMSR_HA_SHIFT
#endif
void pci_init_board(void)
{
struct pci_controller *hose;
volatile ccsr_fsl_pci_t *pci;
int width;
int host;
#if defined(CONFIG_MPC85xx)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#elif defined(CONFIG_MPC86xx)
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
#endif
uint devdisr = in_be32(&gur->devdisr);
uint io_sel = (in_be32(&gur->pordevsr) & MPC8xxx_PORDEVSR_IO_SEL) >>
MPC8xxx_PORDEVSR_IO_SEL_SHIFT;
uint host_agent = (in_be32(&gur->porbmsr) & MPC8xxx_PORBMSR_HA) >>
MPC8xxx_PORBMSR_HA_SHIFT;
struct pci_region *r;
#ifdef CONFIG_PCI1
uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD;
uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32;
uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB;
uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1;
uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
width = 0; /* Silence compiler warning... */
io_sel &= 0xf; /* Silence compiler warning... */
pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
hose = &pci1_hose;
host = host_agent_cfg[host_agent].pci_host[0];
r = hose->regions;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n",
pci_32 ? 32 : 64,
pcix ? "PCIX" : "PCI",
pci_spd_norm ? ">=" : "<=",
pcix ? freq * 2 : freq,
host ? "host" : "agent",
pci_arb ? "arbiter" : "external-arbiter");
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCI1_MEM_BASE,
CONFIG_SYS_PCI1_MEM_PHYS,
CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCI1_IO_BASE,
CONFIG_SYS_PCI1_IO_PHYS,
CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno = first_free_busno;
fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
/* Unlock inbound PCI configuration cycles */
if (!host)
fsl_pci_config_unlock(hose);
first_free_busno = hose->last_busno + 1;
printf(" PCI1 on bus %02x - %02x\n",
hose->first_busno, hose->last_busno);
} else {
printf(" PCI1: disabled\n");
}
#elif defined CONFIG_MPC8548
/* PCI1 not present on MPC8572 */
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
#endif
#ifdef CONFIG_PCIE1
pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
hose = &pcie1_hose;
host = host_agent_cfg[host_agent].pcie_root[0];
width = io_port_cfg[io_sel].pcie_width[0];
r = hose->regions;
if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
printf("\n PCIE1 connected as %s (x%d)",
host ? "Root Complex" : "Endpoint", width);
if (in_be32(&pci->pme_msg_det)) {
out_be32(&pci->pme_msg_det, 0xffffffff);
debug(" with errors. Clearing. Now 0x%08x",
in_be32(&pci->pme_msg_det));
}
printf("\n");
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCIE1_MEM_BASE,
CONFIG_SYS_PCIE1_MEM_PHYS,
CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCIE1_IO_BASE,
CONFIG_SYS_PCIE1_IO_PHYS,
CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno = first_free_busno;
fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
/* Unlock inbound PCI configuration cycles */
if (!host)
fsl_pci_config_unlock(hose);
first_free_busno = hose->last_busno + 1;
printf(" PCIE1 on bus %02x - %02x\n",
hose->first_busno, hose->last_busno);
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1);
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCIE2
pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
hose = &pcie2_hose;
host = host_agent_cfg[host_agent].pcie_root[1];
width = io_port_cfg[io_sel].pcie_width[1];
r = hose->regions;
if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
printf("\n PCIE2 connected as %s (x%d)",
host ? "Root Complex" : "Endpoint", width);
if (in_be32(&pci->pme_msg_det)) {
out_be32(&pci->pme_msg_det, 0xffffffff);
debug(" with errors. Clearing. Now 0x%08x",
in_be32(&pci->pme_msg_det));
}
printf("\n");
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCIE2_MEM_BASE,
CONFIG_SYS_PCIE2_MEM_PHYS,
CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCIE2_IO_BASE,
CONFIG_SYS_PCIE2_IO_PHYS,
CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno = first_free_busno;
fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
/* Unlock inbound PCI configuration cycles */
if (!host)
fsl_pci_config_unlock(hose);
first_free_busno = hose->last_busno + 1;
printf(" PCIE2 on bus %02x - %02x\n",
hose->first_busno, hose->last_busno);
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2);
#endif /* CONFIG_PCIE2 */
#ifdef CONFIG_PCIE3
pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
hose = &pcie3_hose;
host = host_agent_cfg[host_agent].pcie_root[2];
width = io_port_cfg[io_sel].pcie_width[2];
r = hose->regions;
if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
printf("\n PCIE3 connected as %s (x%d)",
host ? "Root Complex" : "Endpoint", width);
if (in_be32(&pci->pme_msg_det)) {
out_be32(&pci->pme_msg_det, 0xffffffff);
debug(" with errors. Clearing. Now 0x%08x",
in_be32(&pci->pme_msg_det));
}
printf("\n");
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCIE3_MEM_BASE,
CONFIG_SYS_PCIE3_MEM_PHYS,
CONFIG_SYS_PCIE3_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCIE3_IO_BASE,
CONFIG_SYS_PCIE3_IO_PHYS,
CONFIG_SYS_PCIE3_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno = first_free_busno;
fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
/* Unlock inbound PCI configuration cycles */
if (!host)
fsl_pci_config_unlock(hose);
first_free_busno = hose->last_busno + 1;
printf(" PCIE3 on bus %02x - %02x\n",
hose->first_busno, hose->last_busno);
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3);
#endif /* CONFIG_PCIE3 */
}
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_pci_setup(void *blob, bd_t *bd)
{
FT_FSL_PCI_SETUP;
}
#endif /* CONFIG_OF_BOARD_SETUP */