mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
412a4c6f1b
Enable TIMER and TEGRA_TIMER for TEGRA_ARMV7_COMMON and TEGRA210. Additionally enable SPL_TIMER if build as SPL part and drop deprecated configs from common header. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
2312 lines
55 KiB
Text
2312 lines
55 KiB
Text
menu "ARM architecture"
|
|
depends on ARM
|
|
|
|
config SYS_ARCH
|
|
default "arm"
|
|
|
|
config ARM64
|
|
bool
|
|
select PHYS_64BIT
|
|
select SYS_CACHE_SHIFT_6
|
|
imply SPL_SEPARATE_BSS
|
|
|
|
config ARM64_CRC32
|
|
bool "Enable support for CRC32 instruction"
|
|
depends on ARM64
|
|
default y
|
|
help
|
|
ARMv8 implements dedicated crc32 instruction for crc32 calculation.
|
|
This is faster than software crc32 calculation. This instruction may
|
|
not be present on all ARMv8.0, but is always present on ARMv8.1 and
|
|
newer.
|
|
|
|
config COUNTER_FREQUENCY
|
|
int "Timer clock frequency"
|
|
depends on ARM64 || CPU_V7A
|
|
default 8000000 if IMX8 || MX7 || MX6UL || MX6ULL
|
|
default 24000000 if ARCH_SUNXI || ARCH_EXYNOS || ROCKCHIP_RK3128 || \
|
|
ROCKCHIP_RK3288 || ROCKCHIP_RK322X || ROCKCHIP_RK3036
|
|
default 25000000 if ARCH_LX2160A || ARCH_LX2162A || ARCH_LS1088A
|
|
default 100000000 if ARCH_ZYNQMP
|
|
default 0
|
|
help
|
|
For platforms with ARMv8-A and ARMv7-A which features a system
|
|
counter, those platforms needs software to program the counter
|
|
frequency. Setup time clock frequency for certain platform.
|
|
0 means no need to configure the system counter frequency.
|
|
For platforms needs the frequency set in U-Boot with a
|
|
pre-defined value, should have the macro defined as a non-zero value.
|
|
|
|
config POSITION_INDEPENDENT
|
|
bool "Generate position-independent pre-relocation code"
|
|
depends on ARM64 || CPU_V7A
|
|
help
|
|
U-Boot expects to be linked to a specific hard-coded address, and to
|
|
be loaded to and run from that address. This option lifts that
|
|
restriction, thus allowing the code to be loaded to and executed from
|
|
almost any 4K aligned address. This logic relies on the relocation
|
|
information that is embedded in the binary to support U-Boot
|
|
relocating itself to the top-of-RAM later during execution.
|
|
|
|
config INIT_SP_RELATIVE
|
|
bool "Specify the early stack pointer relative to the .bss section"
|
|
depends on ARM64
|
|
default n if ARCH_QEMU
|
|
default y if POSITION_INDEPENDENT
|
|
help
|
|
U-Boot typically uses a hard-coded value for the stack pointer
|
|
before relocation. Enable this option to instead calculate the
|
|
initial SP at run-time. This is useful to avoid hard-coding addresses
|
|
into U-Boot, so that it can be loaded and executed at arbitrary
|
|
addresses and thus avoid using arbitrary addresses at runtime.
|
|
|
|
If this option is enabled, the early stack pointer is set to
|
|
&_bss_start with a offset value added. The offset is specified by
|
|
SYS_INIT_SP_BSS_OFFSET.
|
|
|
|
config SYS_INIT_SP_BSS_OFFSET
|
|
int "Early stack offset from the .bss base address"
|
|
depends on ARM64
|
|
depends on INIT_SP_RELATIVE
|
|
default 524288
|
|
help
|
|
This option's value is the offset added to &_bss_start in order to
|
|
calculate the stack pointer. This offset should be large enough so
|
|
that the early malloc region, global data (gd), and early stack usage
|
|
do not overlap any appended DTB.
|
|
|
|
config SPL_SYS_NO_VECTOR_TABLE
|
|
depends on SPL
|
|
bool
|
|
|
|
config LINUX_KERNEL_IMAGE_HEADER
|
|
depends on ARM64
|
|
bool
|
|
help
|
|
Place a Linux kernel image header at the start of the U-Boot binary.
|
|
The format of the header is described in the Linux kernel source at
|
|
Documentation/arm64/booting.txt. This feature is useful since the
|
|
image header reports the amount of memory (BSS and similar) that
|
|
U-Boot needs to use, but which isn't part of the binary.
|
|
|
|
config LNX_KRNL_IMG_TEXT_OFFSET_BASE
|
|
depends on LINUX_KERNEL_IMAGE_HEADER
|
|
hex
|
|
help
|
|
The value subtracted from CONFIG_TEXT_BASE to calculate the
|
|
TEXT_OFFSET value written to the Linux kernel image header.
|
|
|
|
config GICV2
|
|
bool
|
|
|
|
config GICV3
|
|
bool
|
|
|
|
config GIC_V3_ITS
|
|
bool "ARM GICV3 ITS"
|
|
select IRQ
|
|
help
|
|
ARM GICV3 Interrupt translation service (ITS).
|
|
Basic support for programming locality specific peripheral
|
|
interrupts (LPI) configuration tables and enable LPI tables.
|
|
LPI configuration table can be used by u-boot or Linux.
|
|
ARM GICV3 has limitation, once the LPI table is enabled, LPI
|
|
configuration table can not be re-programmed, unless GICV3 reset.
|
|
|
|
config STATIC_RELA
|
|
bool
|
|
default y if ARM64
|
|
|
|
config DMA_ADDR_T_64BIT
|
|
bool
|
|
default y if ARM64
|
|
|
|
config HAS_VBAR
|
|
bool
|
|
|
|
config HAS_THUMB2
|
|
bool
|
|
|
|
config GPIO_EXTRA_HEADER
|
|
bool
|
|
|
|
# Used for compatibility with asm files copied from the kernel
|
|
config ARM_ASM_UNIFIED
|
|
bool
|
|
default y
|
|
|
|
# Used for compatibility with asm files copied from the kernel
|
|
config THUMB2_KERNEL
|
|
bool
|
|
|
|
config SYS_ICACHE_OFF
|
|
bool "Do not enable icache"
|
|
help
|
|
Do not enable instruction cache in U-Boot.
|
|
|
|
config SPL_SYS_ICACHE_OFF
|
|
bool "Do not enable icache in SPL"
|
|
depends on SPL
|
|
default SYS_ICACHE_OFF
|
|
help
|
|
Do not enable instruction cache in SPL.
|
|
|
|
config SYS_DCACHE_OFF
|
|
bool "Do not enable dcache"
|
|
help
|
|
Do not enable data cache in U-Boot.
|
|
|
|
config SPL_SYS_DCACHE_OFF
|
|
bool "Do not enable dcache in SPL"
|
|
depends on SPL
|
|
default SYS_DCACHE_OFF
|
|
help
|
|
Do not enable data cache in SPL.
|
|
|
|
config SYS_ARM_CACHE_CP15
|
|
bool "CP15 based cache enabling support"
|
|
help
|
|
Select this if your processor suports enabling caches by using
|
|
CP15 registers.
|
|
|
|
config SYS_ARM_MMU
|
|
bool "MMU-based Paged Memory Management Support"
|
|
select SYS_ARM_CACHE_CP15
|
|
help
|
|
Select if you want MMU-based virtualised addressing space
|
|
support via paged memory management.
|
|
|
|
config SYS_ARM_MPU
|
|
bool 'Use the ARM v7 PMSA Compliant MPU'
|
|
help
|
|
Some ARM systems without an MMU have instead a Memory Protection
|
|
Unit (MPU) that defines the type and permissions for regions of
|
|
memory.
|
|
If your CPU has an MPU then you should choose 'y' here unless you
|
|
know that you do not want to use the MPU.
|
|
|
|
# If set, the workarounds for these ARM errata are applied early during U-Boot
|
|
# startup. Note that in general these options force the workarounds to be
|
|
# applied; no CPU-type/version detection exists, unlike the similar options in
|
|
# the Linux kernel. Do not set these options unless they apply! Also note that
|
|
# the following can be machine-specific errata. These do have ability to
|
|
# provide rudimentary version and machine-specific checks, but expect no
|
|
# product checks:
|
|
# CONFIG_ARM_ERRATA_430973
|
|
# CONFIG_ARM_ERRATA_454179
|
|
# CONFIG_ARM_ERRATA_621766
|
|
# CONFIG_ARM_ERRATA_798870
|
|
# CONFIG_ARM_ERRATA_801819
|
|
# CONFIG_ARM_CORTEX_A8_CVE_2017_5715
|
|
# CONFIG_ARM_CORTEX_A15_CVE_2017_5715
|
|
|
|
config ARM_ERRATA_430973
|
|
bool
|
|
|
|
config ARM_ERRATA_454179
|
|
bool
|
|
|
|
config ARM_ERRATA_621766
|
|
bool
|
|
|
|
config ARM_ERRATA_716044
|
|
bool
|
|
|
|
config ARM_ERRATA_725233
|
|
bool
|
|
|
|
config ARM_ERRATA_742230
|
|
bool
|
|
|
|
config ARM_ERRATA_743622
|
|
bool
|
|
|
|
config ARM_ERRATA_751472
|
|
bool
|
|
|
|
config ARM_ERRATA_761320
|
|
bool
|
|
|
|
config ARM_ERRATA_773022
|
|
bool
|
|
|
|
config ARM_ERRATA_774769
|
|
bool
|
|
|
|
config ARM_ERRATA_794072
|
|
bool
|
|
|
|
config ARM_ERRATA_798870
|
|
bool
|
|
|
|
config ARM_ERRATA_801819
|
|
bool
|
|
|
|
config ARM_ERRATA_826974
|
|
bool
|
|
|
|
config ARM_ERRATA_828024
|
|
bool
|
|
|
|
config ARM_ERRATA_829520
|
|
bool
|
|
|
|
config ARM_ERRATA_833069
|
|
bool
|
|
|
|
config ARM_ERRATA_833471
|
|
bool
|
|
|
|
config ARM_ERRATA_845369
|
|
bool
|
|
|
|
config ARM_ERRATA_852421
|
|
bool
|
|
|
|
config ARM_ERRATA_852423
|
|
bool
|
|
|
|
config ARM_ERRATA_855873
|
|
bool
|
|
|
|
config ARM_CORTEX_A8_CVE_2017_5715
|
|
bool
|
|
|
|
config ARM_CORTEX_A15_CVE_2017_5715
|
|
bool
|
|
|
|
config CPU_ARM720T
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
imply SYS_ARM_MMU
|
|
|
|
config CPU_ARM920T
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
imply SYS_ARM_MMU
|
|
|
|
config CPU_ARM926EJS
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
imply SYS_ARM_MMU
|
|
imply SPL_SEPARATE_BSS
|
|
|
|
config CPU_ARM946ES
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
imply SYS_ARM_MMU
|
|
|
|
config CPU_ARM1136
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
imply SYS_ARM_MMU
|
|
imply SPL_SEPARATE_BSS
|
|
|
|
config CPU_ARM1176
|
|
bool
|
|
select HAS_VBAR
|
|
select SYS_CACHE_SHIFT_5
|
|
imply SYS_ARM_MMU
|
|
|
|
config CPU_V7A
|
|
bool
|
|
select HAS_THUMB2
|
|
select HAS_VBAR
|
|
select SYS_CACHE_SHIFT_6
|
|
imply SYS_ARM_MMU
|
|
|
|
config CPU_V7M
|
|
bool
|
|
select HAS_THUMB2
|
|
select SYS_ARM_MPU
|
|
select SYS_CACHE_SHIFT_5
|
|
select SYS_THUMB_BUILD
|
|
select THUMB2_KERNEL
|
|
|
|
config CPU_V7R
|
|
bool
|
|
select HAS_THUMB2
|
|
select SYS_ARM_CACHE_CP15
|
|
select SYS_ARM_MPU
|
|
select SYS_CACHE_SHIFT_6
|
|
|
|
config SYS_CPU
|
|
default "arm720t" if CPU_ARM720T
|
|
default "arm920t" if CPU_ARM920T
|
|
default "arm926ejs" if CPU_ARM926EJS
|
|
default "arm946es" if CPU_ARM946ES
|
|
default "arm1136" if CPU_ARM1136
|
|
default "arm1176" if CPU_ARM1176
|
|
default "armv7" if CPU_V7A
|
|
default "armv7" if CPU_V7R
|
|
default "armv7m" if CPU_V7M
|
|
default "armv8" if ARM64
|
|
|
|
config SYS_ARM_ARCH
|
|
int
|
|
default 4 if CPU_ARM720T
|
|
default 4 if CPU_ARM920T
|
|
default 5 if CPU_ARM926EJS
|
|
default 5 if CPU_ARM946ES
|
|
default 6 if CPU_ARM1136
|
|
default 6 if CPU_ARM1176
|
|
default 7 if CPU_V7A
|
|
default 7 if CPU_V7M
|
|
default 7 if CPU_V7R
|
|
default 8 if ARM64
|
|
|
|
choice
|
|
prompt "Select the ARM data write cache policy"
|
|
default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || RZA1
|
|
default SYS_ARM_CACHE_WRITEBACK
|
|
|
|
config SYS_ARM_CACHE_WRITEBACK
|
|
bool "Write-back (WB)"
|
|
help
|
|
A write updates the cache only and marks the cache line as dirty.
|
|
External memory is updated only when the line is evicted or explicitly
|
|
cleaned.
|
|
|
|
config SYS_ARM_CACHE_WRITETHROUGH
|
|
bool "Write-through (WT)"
|
|
help
|
|
A write updates both the cache and the external memory system.
|
|
This does not mark the cache line as dirty.
|
|
|
|
config SYS_ARM_CACHE_WRITEALLOC
|
|
bool "Write allocation (WA)"
|
|
help
|
|
A cache line is allocated on a write miss. This means that executing a
|
|
store instruction on the processor might cause a burst read to occur.
|
|
There is a linefill to obtain the data for the cache line, before the
|
|
write is performed.
|
|
endchoice
|
|
|
|
config ARCH_VERY_EARLY_INIT
|
|
bool
|
|
|
|
config SPL_ARCH_VERY_EARLY_INIT
|
|
bool
|
|
|
|
config ARCH_CPU_INIT
|
|
bool "Enable ARCH_CPU_INIT"
|
|
help
|
|
Some architectures require a call to arch_cpu_init().
|
|
Say Y here to enable it
|
|
|
|
config SYS_ARCH_TIMER
|
|
bool "ARM Generic Timer support"
|
|
depends on CPU_V7A || ARM64
|
|
default y if ARM64
|
|
help
|
|
The ARM Generic Timer (aka arch-timer) provides an architected
|
|
interface to a timer source on an SoC.
|
|
It is mandatory for ARMv8 implementation and widely available
|
|
on ARMv7 systems.
|
|
|
|
config ARM_SMCCC
|
|
bool "Support for ARM SMC Calling Convention (SMCCC)"
|
|
depends on CPU_V7A || ARM64
|
|
select ARM_PSCI_FW
|
|
help
|
|
Say Y here if you want to enable ARM SMC Calling Convention.
|
|
This should be enabled if U-Boot needs to communicate with system
|
|
firmware (for example, PSCI) according to SMCCC.
|
|
|
|
config SYS_THUMB_BUILD
|
|
bool "Build U-Boot using the Thumb instruction set"
|
|
depends on !ARM64
|
|
help
|
|
Use this flag to build U-Boot using the Thumb instruction set for
|
|
ARM architectures. Thumb instruction set provides better code
|
|
density. For ARM architectures that support Thumb2 this flag will
|
|
result in Thumb2 code generated by GCC.
|
|
|
|
config SPL_SYS_THUMB_BUILD
|
|
bool "Build SPL using the Thumb instruction set"
|
|
default y if SYS_THUMB_BUILD
|
|
depends on !ARM64 && SPL
|
|
help
|
|
Use this flag to build SPL using the Thumb instruction set for
|
|
ARM architectures. Thumb instruction set provides better code
|
|
density. For ARM architectures that support Thumb2 this flag will
|
|
result in Thumb2 code generated by GCC.
|
|
|
|
config TPL_SYS_THUMB_BUILD
|
|
bool "Build TPL using the Thumb instruction set"
|
|
default y if SYS_THUMB_BUILD
|
|
depends on TPL && !ARM64
|
|
help
|
|
Use this flag to build TPL using the Thumb instruction set for
|
|
ARM architectures. Thumb instruction set provides better code
|
|
density. For ARM architectures that support Thumb2 this flag will
|
|
result in Thumb2 code generated by GCC.
|
|
|
|
config SYS_L2_PL310
|
|
bool "ARM PL310 L2 cache controller"
|
|
help
|
|
Enable support for ARM PL310 L2 cache controller in U-Boot
|
|
|
|
config SPL_SYS_L2_PL310
|
|
bool "ARM PL310 L2 cache controller in SPL"
|
|
help
|
|
Enable support for ARM PL310 L2 cache controller in SPL
|
|
|
|
config SYS_L2CACHE_OFF
|
|
bool "L2cache off"
|
|
help
|
|
If SoC does not support L2CACHE or one does not want to enable
|
|
L2CACHE, choose this option.
|
|
|
|
config ENABLE_ARM_SOC_BOOT0_HOOK
|
|
bool "prepare BOOT0 header"
|
|
help
|
|
If the SoC's BOOT0 requires a header area filled with (magic)
|
|
values, then choose this option, and create a file included as
|
|
<asm/arch/boot0.h> which contains the required assembler code.
|
|
|
|
config USE_ARCH_MEMCPY
|
|
bool "Use an assembly optimized implementation of memcpy"
|
|
default y if !ARM64
|
|
depends on !ARM64 || (ARM64 && (GCC_VERSION >= 90400))
|
|
help
|
|
Enable the generation of an optimized version of memcpy.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config SPL_USE_ARCH_MEMCPY
|
|
bool "Use an assembly optimized implementation of memcpy for SPL"
|
|
default y if USE_ARCH_MEMCPY
|
|
depends on SPL
|
|
help
|
|
Enable the generation of an optimized version of memcpy.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config TPL_USE_ARCH_MEMCPY
|
|
bool "Use an assembly optimized implementation of memcpy for TPL"
|
|
default y if USE_ARCH_MEMCPY
|
|
depends on TPL
|
|
help
|
|
Enable the generation of an optimized version of memcpy.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config USE_ARCH_MEMMOVE
|
|
bool "Use an assembly optimized implementation of memmove" if !ARM64
|
|
default USE_ARCH_MEMCPY if ARM64
|
|
depends on ARM64
|
|
help
|
|
Enable the generation of an optimized version of memmove.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config SPL_USE_ARCH_MEMMOVE
|
|
bool "Use an assembly optimized implementation of memmove for SPL" if !ARM64
|
|
default SPL_USE_ARCH_MEMCPY if ARM64
|
|
depends on SPL && ARM64
|
|
help
|
|
Enable the generation of an optimized version of memmove.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config TPL_USE_ARCH_MEMMOVE
|
|
bool "Use an assembly optimized implementation of memmove for TPL" if !ARM64
|
|
default TPL_USE_ARCH_MEMCPY if ARM64
|
|
depends on TPL && ARM64
|
|
help
|
|
Enable the generation of an optimized version of memmove.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config USE_ARCH_MEMSET
|
|
bool "Use an assembly optimized implementation of memset"
|
|
default y if !ARM64
|
|
depends on !ARM64 || (ARM64 && (GCC_VERSION >= 90400))
|
|
help
|
|
Enable the generation of an optimized version of memset.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config SPL_USE_ARCH_MEMSET
|
|
bool "Use an assembly optimized implementation of memset for SPL"
|
|
default y if USE_ARCH_MEMSET
|
|
depends on SPL
|
|
help
|
|
Enable the generation of an optimized version of memset.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config TPL_USE_ARCH_MEMSET
|
|
bool "Use an assembly optimized implementation of memset for TPL"
|
|
default y if USE_ARCH_MEMSET
|
|
depends on TPL
|
|
help
|
|
Enable the generation of an optimized version of memset.
|
|
Such an implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config ARM64_SUPPORT_AARCH32
|
|
bool "ARM64 system support AArch32 execution state"
|
|
depends on ARM64
|
|
default y if !TARGET_THUNDERX_88XX
|
|
help
|
|
This ARM64 system supports AArch32 execution state.
|
|
|
|
config IPROC
|
|
bool
|
|
|
|
config S5P
|
|
def_bool y if ARCH_EXYNOS || ARCH_S5PC1XX
|
|
|
|
choice
|
|
prompt "Target select"
|
|
default TARGET_HIKEY
|
|
|
|
config ARCH_AT91
|
|
bool "Atmel AT91"
|
|
select GPIO_EXTRA_HEADER
|
|
select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
|
|
select SPL_SEPARATE_BSS if SPL
|
|
|
|
config ARCH_DAVINCI
|
|
bool "TI DaVinci"
|
|
select CPU_ARM926EJS
|
|
select GPIO_EXTRA_HEADER
|
|
select SPL_DM_SPI if SPL
|
|
imply CMD_SAVES
|
|
help
|
|
Support for TI's DaVinci platform.
|
|
|
|
config ARCH_KIRKWOOD
|
|
bool "Marvell Kirkwood"
|
|
select ARCH_MISC_INIT
|
|
select BOARD_EARLY_INIT_F
|
|
select CPU_ARM926EJS
|
|
select GPIO_EXTRA_HEADER
|
|
select TIMER
|
|
|
|
config ARCH_MVEBU
|
|
bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_SPI_FLASH
|
|
select GPIO_EXTRA_HEADER
|
|
select SPL_DM_SPI if SPL
|
|
select SPL_DM_SPI_FLASH if SPL
|
|
select SPL_TIMER if SPL
|
|
select TIMER if !ARM64
|
|
select OF_CONTROL
|
|
select OF_SEPARATE
|
|
select SPI
|
|
imply CMD_DM
|
|
|
|
config ARCH_ORION5X
|
|
bool "Marvell Orion"
|
|
select CPU_ARM926EJS
|
|
select GPIO_EXTRA_HEADER
|
|
select SPL_SEPARATE_BSS if SPL
|
|
select TIMER
|
|
|
|
config TARGET_STV0991
|
|
bool "Support stv0991"
|
|
select CPU_V7A
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_SPI_FLASH
|
|
select GPIO_EXTRA_HEADER
|
|
select PL01X_SERIAL
|
|
select SPI
|
|
select SPI_FLASH
|
|
imply CMD_DM
|
|
|
|
config ARCH_BCM283X
|
|
bool "Broadcom BCM283X family"
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
select SERIAL_SEARCH_ALL
|
|
imply CMD_DM
|
|
imply FAT_WRITE
|
|
|
|
config ARCH_BCMSTB
|
|
bool "Broadcom BCM7XXX family"
|
|
select CPU_V7A
|
|
select DM
|
|
select GPIO_EXTRA_HEADER
|
|
select OF_CONTROL
|
|
imply CMD_DM
|
|
imply OF_HAS_PRIOR_STAGE
|
|
help
|
|
This enables support for Broadcom ARM-based set-top box
|
|
chipsets, including the 7445 family of chips.
|
|
|
|
config ARCH_BCMBCA
|
|
bool "Broadcom broadband chip family"
|
|
select DM
|
|
select OF_CONTROL
|
|
imply CMD_DM
|
|
|
|
config TARGET_VEXPRESS_CA9X4
|
|
bool "Support vexpress_ca9x4"
|
|
select CPU_V7A
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_BCMCYGNUS
|
|
bool "Support bcmcygnus"
|
|
select CPU_V7A
|
|
select GPIO_EXTRA_HEADER
|
|
select IPROC
|
|
imply BCM_SF2_ETH
|
|
imply BCM_SF2_ETH_GMAC
|
|
imply CMD_HASH
|
|
imply CRC32_VERIFY
|
|
imply FAT_WRITE
|
|
imply HASH_VERIFY
|
|
imply NETDEVICES
|
|
|
|
config TARGET_BCMNS2
|
|
bool "Support Broadcom Northstar2"
|
|
select ARM64
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
|
|
ARMv8 Cortex-A57 processors targeting a broad range of networking
|
|
applications.
|
|
|
|
config TARGET_BCMNS3
|
|
bool "Support Broadcom NS3"
|
|
select ARM64
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Support for Broadcom Northstar 3 SoCs. NS3 is a octo-core 64-bit
|
|
ARMv8 Cortex-A72 processors targeting a broad range of networking
|
|
applications.
|
|
|
|
config ARCH_EXYNOS
|
|
bool "Samsung EXYNOS"
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_I2C
|
|
select DM_KEYBOARD
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_SPI_FLASH
|
|
select SPI
|
|
select GPIO_EXTRA_HEADER
|
|
imply SYS_THUMB_BUILD
|
|
imply CMD_DM
|
|
imply FAT_WRITE
|
|
|
|
config ARCH_S5PC1XX
|
|
bool "Samsung S5PC1XX"
|
|
select CPU_V7A
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_I2C
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
imply CMD_DM
|
|
|
|
config ARCH_HIGHBANK
|
|
bool "Calxeda Highbank"
|
|
select CPU_V7A
|
|
select PL01X_SERIAL
|
|
select DM
|
|
select DM_SERIAL
|
|
select OF_CONTROL
|
|
select CLK
|
|
select CLK_CCF
|
|
select AHCI
|
|
select PHYS_64BIT
|
|
select TIMER
|
|
select SP804_TIMER
|
|
imply OF_HAS_PRIOR_STAGE
|
|
|
|
config ARCH_INTEGRATOR
|
|
bool "ARM Ltd. Integrator family"
|
|
select DM
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select PL01X_SERIAL
|
|
imply CMD_DM
|
|
|
|
config ARCH_IPQ40XX
|
|
bool "Qualcomm IPQ40xx SoCs"
|
|
select CPU_V7A
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_SERIAL
|
|
select DM_RESET
|
|
select GPIO_EXTRA_HEADER
|
|
select MSM_SMEM
|
|
select PINCTRL
|
|
select CLK
|
|
select SMEM
|
|
select OF_CONTROL
|
|
imply CMD_DM
|
|
|
|
config ARCH_KEYSTONE
|
|
bool "TI Keystone"
|
|
select CMD_POWEROFF
|
|
select CPU_V7A
|
|
select DDR_SPD
|
|
select SUPPORT_SPL
|
|
select SYS_ARCH_TIMER
|
|
select SYS_THUMB_BUILD
|
|
imply CMD_MTDPARTS
|
|
imply CMD_SAVES
|
|
imply FIT
|
|
|
|
config ARCH_K3
|
|
bool "Texas Instruments' K3 Architecture"
|
|
select SPL
|
|
select SUPPORT_SPL
|
|
select FIT
|
|
|
|
config ARCH_OMAP2PLUS
|
|
bool "TI OMAP2+"
|
|
select CPU_V7A
|
|
select GPIO_EXTRA_HEADER
|
|
select SPL_BOARD_INIT if SPL
|
|
select SPL_STACK_R if SPL
|
|
select SUPPORT_SPL
|
|
imply TI_SYSC if DM && OF_CONTROL
|
|
imply FIT
|
|
imply SPL_SEPARATE_BSS
|
|
|
|
config ARCH_MESON
|
|
bool "Amlogic Meson"
|
|
select GPIO_EXTRA_HEADER
|
|
imply DISTRO_DEFAULTS
|
|
imply DM_RNG
|
|
help
|
|
Support for the Meson SoC family developed by Amlogic Inc.,
|
|
targeted at media players and tablet computers. We currently
|
|
support the S905 (GXBaby) 64-bit SoC.
|
|
|
|
config ARCH_MEDIATEK
|
|
bool "MediaTek SoCs"
|
|
select DM
|
|
select GPIO_EXTRA_HEADER
|
|
select OF_CONTROL
|
|
select SPL_DM if SPL
|
|
select SPL_LIBCOMMON_SUPPORT if SPL
|
|
select SPL_LIBGENERIC_SUPPORT if SPL
|
|
select SPL_OF_CONTROL if SPL
|
|
select SUPPORT_SPL
|
|
help
|
|
Support for the MediaTek SoCs family developed by MediaTek Inc.
|
|
Please refer to doc/README.mediatek for more information.
|
|
|
|
config ARCH_LPC32XX
|
|
bool "NXP LPC32xx platform"
|
|
select CPU_ARM926EJS
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select SPL_DM if SPL
|
|
select SUPPORT_SPL
|
|
imply CMD_DM
|
|
|
|
config ARCH_IMX8
|
|
bool "NXP i.MX8 platform"
|
|
select ARM64
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_4
|
|
select SYS_FSL_SEC_LE
|
|
select DM
|
|
select DM_EVENT
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
select OF_CONTROL
|
|
select ENABLE_ARM_SOC_BOOT0_HOOK
|
|
|
|
config ARCH_IMX8M
|
|
bool "NXP i.MX8M platform"
|
|
select ARM64
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_4
|
|
select SYS_FSL_SEC_LE
|
|
select SYS_I2C_MXC
|
|
select DM
|
|
select DM_EVENT if CLK
|
|
select SUPPORT_SPL
|
|
imply CMD_DM
|
|
|
|
config ARCH_IMX8ULP
|
|
bool "NXP i.MX8ULP platform"
|
|
select ARM64
|
|
select DM
|
|
select DM_EVENT
|
|
select MACH_IMX
|
|
select OF_CONTROL
|
|
select SUPPORT_SPL
|
|
select GPIO_EXTRA_HEADER
|
|
select MISC
|
|
select IMX_SENTINEL
|
|
imply CMD_DM
|
|
|
|
config ARCH_IMX9
|
|
bool "NXP i.MX9 platform"
|
|
select ARM64
|
|
select DM
|
|
select DM_EVENT
|
|
select MACH_IMX
|
|
select SUPPORT_SPL
|
|
select GPIO_EXTRA_HEADER
|
|
select MISC
|
|
select IMX_SENTINEL
|
|
imply CMD_DM
|
|
|
|
config ARCH_IMXRT
|
|
bool "NXP i.MXRT platform"
|
|
select CPU_V7M
|
|
select DM
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
select SUPPORT_SPL
|
|
imply CMD_DM
|
|
|
|
config ARCH_MX23
|
|
bool "NXP i.MX23 family"
|
|
select CPU_ARM926EJS
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
select PL011_SERIAL
|
|
select SUPPORT_SPL
|
|
|
|
config ARCH_MX28
|
|
bool "NXP i.MX28 family"
|
|
select CPU_ARM926EJS
|
|
select GPIO_EXTRA_HEADER
|
|
select PL011_SERIAL
|
|
select MACH_IMX
|
|
select SUPPORT_SPL
|
|
|
|
config ARCH_MX31
|
|
bool "NXP i.MX31 family"
|
|
select CPU_ARM1136
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
|
|
config ARCH_MX7ULP
|
|
bool "NXP MX7ULP"
|
|
select BOARD_POSTCLK_INIT
|
|
select CPU_V7A
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_4
|
|
select SYS_FSL_SEC_LE
|
|
select ROM_UNIFIED_SECTIONS
|
|
imply MXC_GPIO
|
|
imply SYS_THUMB_BUILD
|
|
|
|
config ARCH_MX7
|
|
bool "Freescale MX7"
|
|
select ARCH_MISC_INIT
|
|
select CPU_V7A
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
select MXC_GPT_HCLK
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_4
|
|
select SYS_FSL_SEC_LE
|
|
imply BOARD_EARLY_INIT_F
|
|
imply MXC_GPIO
|
|
imply SYS_THUMB_BUILD
|
|
|
|
config ARCH_MX6
|
|
bool "Freescale MX6"
|
|
select BOARD_POSTCLK_INIT
|
|
select CPU_V7A
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
select MXC_GPT_HCLK
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_4
|
|
select SYS_FSL_SEC_LE
|
|
select SYS_L2_PL310 if !SYS_L2CACHE_OFF
|
|
imply MXC_GPIO
|
|
imply SYS_THUMB_BUILD
|
|
imply SPL_SEPARATE_BSS
|
|
|
|
config ARCH_MX5
|
|
bool "Freescale MX5"
|
|
select BOARD_EARLY_INIT_F
|
|
select CPU_V7A
|
|
select GPIO_EXTRA_HEADER
|
|
select MACH_IMX
|
|
imply MXC_GPIO
|
|
|
|
config ARCH_NEXELL
|
|
bool "Nexell S5P4418/S5P6818 SoC"
|
|
select ENABLE_ARM_SOC_BOOT0_HOOK
|
|
select DM
|
|
select GPIO_EXTRA_HEADER
|
|
|
|
config ARCH_NPCM
|
|
bool "Support Nuvoton SoCs"
|
|
select DM
|
|
select OF_CONTROL
|
|
imply CMD_DM
|
|
|
|
config ARCH_APPLE
|
|
bool "Apple SoCs"
|
|
select ARM64
|
|
select CLK
|
|
select CMD_PCI
|
|
select CMD_USB
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_KEYBOARD
|
|
select DM_MAILBOX
|
|
select DM_RESET
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_USB
|
|
select VIDEO
|
|
select IOMMU
|
|
select LINUX_KERNEL_IMAGE_HEADER
|
|
select OF_BOARD_SETUP
|
|
select OF_CONTROL
|
|
select PCI
|
|
select PINCTRL
|
|
select POSITION_INDEPENDENT
|
|
select POWER_DOMAIN
|
|
select REGMAP
|
|
select SPI
|
|
select SYSCON
|
|
select SYSRESET
|
|
select SYSRESET_WATCHDOG
|
|
select SYSRESET_WATCHDOG_AUTO
|
|
select USB
|
|
imply CMD_DM
|
|
imply CMD_GPT
|
|
imply DISTRO_DEFAULTS
|
|
imply OF_HAS_PRIOR_STAGE
|
|
|
|
config ARCH_OWL
|
|
bool "Actions Semi OWL SoCs"
|
|
select DM
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select OWL_SERIAL
|
|
select CLK
|
|
select CLK_OWL
|
|
select OF_CONTROL
|
|
select SYS_RELOC_GD_ENV_ADDR
|
|
imply CMD_DM
|
|
|
|
config ARCH_QEMU
|
|
bool "QEMU Virtual Platform"
|
|
select DM
|
|
select DM_SERIAL
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
imply CMD_DM
|
|
imply DM_RNG
|
|
imply DM_RTC
|
|
imply RTC_PL031
|
|
imply OF_HAS_PRIOR_STAGE
|
|
|
|
config ARCH_RMOBILE
|
|
bool "Renesas ARM SoCs"
|
|
select DM
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
imply BOARD_EARLY_INIT_F
|
|
imply CMD_DM
|
|
imply FAT_WRITE
|
|
imply SYS_THUMB_BUILD
|
|
imply ARCH_MISC_INIT if DISPLAY_CPUINFO
|
|
|
|
config ARCH_SNAPDRAGON
|
|
bool "Qualcomm Snapdragon SoCs"
|
|
select ARM64
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select MSM_SMEM
|
|
select OF_CONTROL
|
|
select OF_SEPARATE
|
|
select SMEM
|
|
select SPMI
|
|
imply CMD_DM
|
|
|
|
config ARCH_SOCFPGA
|
|
bool "Altera SOCFPGA family"
|
|
select ARCH_EARLY_INIT_R
|
|
select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
|
|
select ARM64 if TARGET_SOCFPGA_SOC64
|
|
select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
|
|
select DM
|
|
select DM_SERIAL
|
|
select GICV2
|
|
select GPIO_EXTRA_HEADER
|
|
select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
|
|
select OF_CONTROL
|
|
select SPL_DM_RESET if DM_RESET
|
|
select SPL_DM_SERIAL
|
|
select SPL_LIBCOMMON_SUPPORT
|
|
select SPL_LIBGENERIC_SUPPORT
|
|
select SPL_OF_CONTROL
|
|
select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64
|
|
select SPL_SERIAL
|
|
select SPL_SYSRESET
|
|
select SPL_WATCHDOG
|
|
select SUPPORT_SPL
|
|
select SYS_NS16550
|
|
select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
|
|
select SYSRESET
|
|
select SYSRESET_SOCFPGA if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
|
|
select SYSRESET_SOCFPGA_SOC64 if TARGET_SOCFPGA_SOC64
|
|
imply CMD_DM
|
|
imply CMD_MTDPARTS
|
|
imply CRC32_VERIFY
|
|
imply DM_SPI
|
|
imply DM_SPI_FLASH
|
|
imply FAT_WRITE
|
|
imply SPL
|
|
imply SPL_DM
|
|
imply SPL_DM_SPI
|
|
imply SPL_DM_SPI_FLASH
|
|
imply SPL_LIBDISK_SUPPORT
|
|
imply SPL_MMC
|
|
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
|
|
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
|
|
imply SPL_SPI_FLASH_SUPPORT
|
|
imply SPL_SPI
|
|
imply L2X0_CACHE
|
|
|
|
config ARCH_SUNXI
|
|
bool "Support sunxi (Allwinner) SoCs"
|
|
select BINMAN
|
|
select CMD_GPIO
|
|
select CMD_MMC if MMC
|
|
select CMD_USB if DISTRO_DEFAULTS && USB_HOST
|
|
select CLK
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_I2C if I2C
|
|
select DM_SPI if SPI
|
|
select DM_SPI_FLASH if SPI
|
|
select DM_KEYBOARD
|
|
select DM_MMC if MMC
|
|
select DM_SCSI if SCSI
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select OF_BOARD_SETUP
|
|
select OF_CONTROL
|
|
select OF_SEPARATE
|
|
select PINCTRL
|
|
select SPECIFY_CONSOLE_INDEX
|
|
select SPL_SEPARATE_BSS if SPL
|
|
select SPL_STACK_R if SPL
|
|
select SPL_SYS_MALLOC_SIMPLE if SPL
|
|
select SPL_SYS_THUMB_BUILD if !ARM64
|
|
select SUNXI_GPIO
|
|
select SYS_NS16550
|
|
select SYS_THUMB_BUILD if !ARM64
|
|
select USB if DISTRO_DEFAULTS
|
|
select USB_KEYBOARD if DISTRO_DEFAULTS && USB_HOST
|
|
select USB_STORAGE if DISTRO_DEFAULTS && USB_HOST
|
|
select SPL_USE_TINY_PRINTF
|
|
select USE_PREBOOT
|
|
select SYS_RELOC_GD_ENV_ADDR
|
|
imply BOARD_LATE_INIT
|
|
imply CMD_DM
|
|
imply CMD_GPT
|
|
imply CMD_UBI if MTD_RAW_NAND
|
|
imply DISTRO_DEFAULTS
|
|
imply FAT_WRITE
|
|
imply FIT
|
|
imply OF_LIBFDT_OVERLAY
|
|
imply PRE_CONSOLE_BUFFER
|
|
imply SPL_GPIO
|
|
imply SPL_LIBCOMMON_SUPPORT
|
|
imply SPL_LIBGENERIC_SUPPORT
|
|
imply SPL_MMC if MMC
|
|
imply SPL_POWER
|
|
imply SPL_SERIAL
|
|
imply SYSRESET
|
|
imply SYSRESET_WATCHDOG
|
|
imply SYSRESET_WATCHDOG_AUTO
|
|
imply USB_GADGET
|
|
imply WDT
|
|
|
|
config ARCH_U8500
|
|
bool "ST-Ericsson U8500 Series"
|
|
select CPU_V7A
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_MMC if MMC
|
|
select DM_SERIAL
|
|
select DM_USB_GADGET if DM_USB
|
|
select OF_CONTROL
|
|
select SYSRESET
|
|
select TIMER
|
|
imply AB8500_USB_PHY
|
|
imply ARM_PL180_MMCI
|
|
imply CLK
|
|
imply DM_PMIC
|
|
imply DM_RTC
|
|
imply NOMADIK_GPIO
|
|
imply NOMADIK_MTU_TIMER
|
|
imply PHY
|
|
imply PL01X_SERIAL
|
|
imply PMIC_AB8500
|
|
imply RTC_PL031
|
|
imply SYS_THUMB_BUILD
|
|
imply SYSRESET_SYSCON
|
|
|
|
config ARCH_VERSAL
|
|
bool "Support Xilinx Versal Platform"
|
|
select ARM64
|
|
select CLK
|
|
select DM
|
|
select DM_MMC if MMC
|
|
select DM_SERIAL
|
|
select GICV3
|
|
select OF_CONTROL
|
|
select SOC_DEVICE
|
|
imply BOARD_LATE_INIT
|
|
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
|
|
config ARCH_VERSAL_NET
|
|
bool "Support Xilinx Versal NET Platform"
|
|
select ARM64
|
|
select CLK
|
|
select DM
|
|
select DM_MMC if MMC
|
|
select DM_SERIAL
|
|
select OF_CONTROL
|
|
imply BOARD_LATE_INIT
|
|
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
|
|
config ARCH_VF610
|
|
bool "Freescale Vybrid"
|
|
select CPU_V7A
|
|
select GPIO_EXTRA_HEADER
|
|
select IOMUX_SHARE_CONF_REG
|
|
select MACH_IMX
|
|
select SYS_FSL_ERRATUM_ESDHC111
|
|
imply CMD_MTDPARTS
|
|
imply MTD_RAW_NAND
|
|
|
|
config ARCH_ZYNQ
|
|
bool "Xilinx Zynq based platform"
|
|
select ARM_TWD_TIMER
|
|
select CLK
|
|
select CLK_ZYNQ
|
|
select CPU_V7A
|
|
select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
|
|
select DM
|
|
select DM_MMC if MMC
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_SPI_FLASH
|
|
select OF_CONTROL
|
|
select SPI
|
|
select SPL_BOARD_INIT if SPL
|
|
select SPL_CLK if SPL
|
|
select SPL_DM if SPL
|
|
select SPL_DM_SPI if SPL
|
|
select SPL_DM_SPI_FLASH if SPL
|
|
select SPL_OF_CONTROL if SPL
|
|
select SPL_SEPARATE_BSS if SPL
|
|
select SPL_TIMER if SPL
|
|
select SUPPORT_SPL
|
|
select TIMER
|
|
imply ARCH_EARLY_INIT_R
|
|
imply BOARD_LATE_INIT
|
|
imply CMD_CLK
|
|
imply CMD_DM
|
|
imply CMD_SPL
|
|
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
imply FAT_WRITE
|
|
|
|
config ARCH_ZYNQMP_R5
|
|
bool "Xilinx ZynqMP R5 based platform"
|
|
select CLK
|
|
select CPU_V7R
|
|
select DM
|
|
select DM_MMC if MMC
|
|
select DM_SERIAL
|
|
select OF_CONTROL
|
|
imply CMD_DM
|
|
imply DM_USB_GADGET
|
|
|
|
config ARCH_ZYNQMP
|
|
bool "Xilinx ZynqMP based platform"
|
|
select ARM64
|
|
select CLK
|
|
select DM
|
|
select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
|
|
imply DM_MAILBOX
|
|
select DM_MMC if MMC
|
|
select DM_SERIAL
|
|
select DM_SPI if SPI
|
|
select DM_SPI_FLASH if DM_SPI
|
|
imply FIRMWARE
|
|
select GICV2
|
|
select OF_CONTROL
|
|
select SPL_BOARD_INIT if SPL
|
|
select SPL_CLK if SPL
|
|
select SPL_DM if SPL
|
|
select SPL_DM_SPI if SPI && SPL_DM
|
|
select SPL_DM_SPI_FLASH if SPL_DM_SPI
|
|
select SPL_DM_MAILBOX if SPL
|
|
imply SPL_FIRMWARE if SPL
|
|
select SPL_SEPARATE_BSS if SPL
|
|
select SUPPORT_SPL
|
|
imply ZYNQMP_IPI if DM_MAILBOX
|
|
select SOC_DEVICE
|
|
imply BOARD_LATE_INIT
|
|
imply CMD_DM
|
|
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
imply FAT_WRITE
|
|
imply MP
|
|
imply DM_USB_GADGET
|
|
imply ZYNQMP_GPIO_MODEPIN if DM_GPIO && USB
|
|
|
|
config ARCH_TEGRA
|
|
bool "NVIDIA Tegra"
|
|
select GPIO_EXTRA_HEADER
|
|
imply DISTRO_DEFAULTS
|
|
imply FAT_WRITE
|
|
imply SPL_TIMER if SPL
|
|
|
|
config ARCH_VEXPRESS64
|
|
bool "Support ARMv8 Arm Ltd. VExpress based boards and models"
|
|
select ARM64
|
|
select DM
|
|
select DM_SERIAL
|
|
select PL01X_SERIAL
|
|
select OF_CONTROL
|
|
select CLK
|
|
select BLK
|
|
select MTD_NOR_FLASH if MTD
|
|
select FLASH_CFI_DRIVER if MTD
|
|
select ENV_IS_IN_FLASH if MTD
|
|
imply DISTRO_DEFAULTS
|
|
|
|
config TARGET_CORSTONE1000
|
|
bool "Support Corstone1000 Platform"
|
|
select ARM64
|
|
select PL01X_SERIAL
|
|
select DM
|
|
|
|
config TARGET_TOTAL_COMPUTE
|
|
bool "Support Total Compute Platform"
|
|
select ARM64
|
|
select PL01X_SERIAL
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_MMC
|
|
select DM_GPIO
|
|
|
|
config TARGET_LS2080A_EMU
|
|
bool "Support ls2080a_emu"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select FSL_DDR_SYNC_REFRESH
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for Freescale LS2080A_EMU platform.
|
|
The LS2080A Development System (EMULATOR) is a pre-silicon
|
|
development platform that supports the QorIQ LS2080A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1088AQDS
|
|
bool "Support ls1088aqds"
|
|
select ARCH_LS1088A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
select SUPPORT_SPL
|
|
select FSL_DDR_INTERACTIVE if !SD_BOOT
|
|
help
|
|
Support for NXP LS1088AQDS platform.
|
|
The LS1088A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS1088A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS2080AQDS
|
|
bool "Support ls2080aqds"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
select SUPPORT_SPL
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
select FSL_DDR_BIST
|
|
select FSL_DDR_INTERACTIVE if !SPL
|
|
help
|
|
Support for Freescale LS2080AQDS platform.
|
|
The LS2080A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS2080A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS2080ARDB
|
|
bool "Support ls2080ardb"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select FSL_DDR_BIST
|
|
select FSL_DDR_INTERACTIVE if !SPL
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
help
|
|
Support for Freescale LS2080ARDB platform.
|
|
The LS2080A Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS2080A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS2081ARDB
|
|
bool "Support ls2081ardb"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
select SUPPORT_SPL
|
|
help
|
|
Support for Freescale LS2081ARDB platform.
|
|
The LS2081A Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS2081A/LS2041A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LX2160ARDB
|
|
bool "Support lx2160ardb"
|
|
select ARCH_LX2160A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for NXP LX2160ARDB platform.
|
|
The lx2160ardb (LX2160A Reference design board (RDB)
|
|
is a high-performance development platform that supports the
|
|
QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
|
|
|
|
config TARGET_LX2160AQDS
|
|
bool "Support lx2160aqds"
|
|
select ARCH_LX2160A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for NXP LX2160AQDS platform.
|
|
The lx2160aqds (LX2160A QorIQ Development System (QDS)
|
|
is a high-performance development platform that supports the
|
|
QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
|
|
|
|
config TARGET_LX2162AQDS
|
|
bool "Support lx2162aqds"
|
|
select ARCH_LX2162A
|
|
select ARCH_MISC_INIT
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for NXP LX2162AQDS platform.
|
|
The lx2162aqds support is based on LX2160A Layerscape Architecture processor.
|
|
|
|
config TARGET_HIKEY
|
|
bool "Support HiKey 96boards Consumer Edition Platform"
|
|
select ARM64
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
select SPECIFY_CONSOLE_INDEX
|
|
imply CMD_DM
|
|
help
|
|
Support for HiKey 96boards platform. It features a HI6220
|
|
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
|
|
|
|
config TARGET_HIKEY960
|
|
bool "Support HiKey960 96boards Consumer Edition Platform"
|
|
select ARM64
|
|
select DM
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
imply CMD_DM
|
|
help
|
|
Support for HiKey960 96boards platform. It features a HI3660
|
|
SoC, with 4xA73 CPU, 4xA53 CPU, MALI-G71 GPU, and 3GB RAM.
|
|
|
|
config TARGET_POPLAR
|
|
bool "Support Poplar 96boards Enterprise Edition Platform"
|
|
select ARM64
|
|
select DM
|
|
select DM_SERIAL
|
|
select GPIO_EXTRA_HEADER
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
imply CMD_DM
|
|
help
|
|
Support for Poplar 96boards EE platform. It features a HI3798cv200
|
|
SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
|
|
making it capable of running any commercial set-top solution based on
|
|
Linux or Android.
|
|
|
|
config TARGET_LS1012AQDS
|
|
bool "Support ls1012aqds"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for Freescale LS1012AQDS platform.
|
|
The LS1012A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1012ARDB
|
|
bool "Support ls1012ardb"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
help
|
|
Support for Freescale LS1012ARDB platform.
|
|
The LS1012A Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1012A2G5RDB
|
|
bool "Support ls1012a2g5rdb"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1012A2G5RDB platform.
|
|
The LS1012A 2G5 Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1012AFRWY
|
|
bool "Support ls1012afrwy"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
help
|
|
Support for Freescale LS1012AFRWY platform.
|
|
The LS1012A FRWY board (FRWY) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1012AFRDM
|
|
bool "Support ls1012afrdm"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for Freescale LS1012AFRDM platform.
|
|
The LS1012A Freedom board (FRDM) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1028AQDS
|
|
bool "Support ls1028aqds"
|
|
select ARCH_LS1028A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for Freescale LS1028AQDS platform
|
|
The LS1028A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS1028A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1028ARDB
|
|
bool "Support ls1028ardb"
|
|
select ARCH_LS1028A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for Freescale LS1028ARDB platform
|
|
The LS1028A Development System (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1028A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1088ARDB
|
|
bool "Support ls1088ardb"
|
|
select ARCH_LS1088A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select FSL_DDR_INTERACTIVE if !SD_BOOT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for NXP LS1088ARDB platform.
|
|
The LS1088A Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1088A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1021AQDS
|
|
bool "Support ls1021aqds"
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7A
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select LS1_DEEP_SLEEP
|
|
select PEN_ADDR_BIG_ENDIAN
|
|
select SUPPORT_SPL
|
|
select SYS_FSL_DDR
|
|
select FSL_DDR_INTERACTIVE
|
|
select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
|
|
select GPIO_EXTRA_HEADER
|
|
select SPI_FLASH_DATAFLASH if FSL_DSPI || FSL_QSPI
|
|
imply SCSI
|
|
|
|
config TARGET_LS1021ATWR
|
|
bool "Support ls1021atwr"
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7A
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select LS1_DEEP_SLEEP
|
|
select PEN_ADDR_BIG_ENDIAN
|
|
select SUPPORT_SPL
|
|
select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
|
|
config TARGET_PG_WCOM_SELI8
|
|
bool "Support Hitachi-Powergrids SELI8 service unit card"
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7A
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select SYS_FSL_DDR
|
|
select FSL_DDR_INTERACTIVE
|
|
select GPIO_EXTRA_HEADER
|
|
select VENDOR_KM
|
|
imply SCSI
|
|
help
|
|
Support for Hitachi-Powergrids SELI8 service unit card.
|
|
SELI8 is a QorIQ LS1021a based service unit card used
|
|
in XMC20 and FOX615 product families.
|
|
|
|
config TARGET_PG_WCOM_EXPU1
|
|
bool "Support Hitachi-Powergrids EXPU1 service unit card"
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7A
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select SYS_FSL_DDR
|
|
select FSL_DDR_INTERACTIVE
|
|
select VENDOR_KM
|
|
imply SCSI
|
|
help
|
|
Support for Hitachi-Powergrids EXPU1 service unit card.
|
|
EXPU1 is a QorIQ LS1021a based service unit card used
|
|
in XMC20 and FOX615 product families.
|
|
|
|
config TARGET_LS1021ATSN
|
|
bool "Support ls1021atsn"
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7A
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select LS1_DEEP_SLEEP
|
|
select SUPPORT_SPL
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
|
|
config TARGET_LS1021AIOT
|
|
bool "Support ls1021aiot"
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7A
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select PEN_ADDR_BIG_ENDIAN
|
|
select SUPPORT_SPL
|
|
select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1021AIOT platform.
|
|
The LS1021A Freescale board (IOT) is a high-performance
|
|
development platform that supports the QorIQ LS1021A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1043AQDS
|
|
bool "Support ls1043aqds"
|
|
select ARCH_LS1043A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select FSL_DDR_INTERACTIVE if !SPL
|
|
select FSL_DSPI if !SPL_NO_DSPI
|
|
select DM_SPI_FLASH if FSL_DSPI
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
help
|
|
Support for Freescale LS1043AQDS platform.
|
|
|
|
config TARGET_LS1043ARDB
|
|
bool "Support ls1043ardb"
|
|
select ARCH_LS1043A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select FSL_DSPI if !SPL_NO_DSPI
|
|
select DM_SPI_FLASH if FSL_DSPI
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for Freescale LS1043ARDB platform.
|
|
|
|
config TARGET_LS1046AQDS
|
|
bool "Support ls1046aqds"
|
|
select ARCH_LS1046A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select DM_SPI_FLASH if DM_SPI
|
|
select SUPPORT_SPL
|
|
select FSL_DDR_BIST if !SPL
|
|
select FSL_DDR_INTERACTIVE if !SPL
|
|
select FSL_DDR_INTERACTIVE if !SPL
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1046AQDS platform.
|
|
The LS1046A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS1046A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1046ARDB
|
|
bool "Support ls1046ardb"
|
|
select ARCH_LS1046A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select DM_SPI_FLASH if DM_SPI
|
|
select POWER_MC34VR500
|
|
select SUPPORT_SPL
|
|
select FSL_DDR_BIST
|
|
select FSL_DDR_INTERACTIVE if !SPL
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1046ARDB platform.
|
|
The LS1046A Reference Design Board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1046A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1046AFRWY
|
|
bool "Support ls1046afrwy"
|
|
select ARCH_LS1046A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_EARLY_INIT_F
|
|
select BOARD_LATE_INIT
|
|
select DM_SPI_FLASH if DM_SPI
|
|
select GPIO_EXTRA_HEADER
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1046AFRWY platform.
|
|
The LS1046A Freeway Board (FRWY) is a high-performance
|
|
development platform that supports the QorIQ LS1046A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_SL28
|
|
bool "Support sl28"
|
|
select ARCH_LS1028A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select SUPPORT_SPL
|
|
select BINMAN
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_I2C
|
|
select DM_MMC
|
|
select DM_SPI_FLASH
|
|
select DM_MDIO
|
|
select PCI
|
|
select DM_RNG
|
|
select DM_RTC
|
|
select DM_SCSI
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select GPIO_EXTRA_HEADER
|
|
select SPL_DM if SPL
|
|
select SPL_DM_SPI if SPL
|
|
select SPL_DM_SPI_FLASH if SPL
|
|
select SPL_DM_I2C if SPL
|
|
select SPL_DM_MMC if SPL
|
|
select SPL_DM_SERIAL if SPL
|
|
help
|
|
Support for Kontron SMARC-sAL28 board.
|
|
|
|
config TARGET_TEN64
|
|
bool "Support ten64"
|
|
select ARCH_LS1088A
|
|
select ARCH_MISC_INIT
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select FSL_DDR_INTERACTIVE if !SD_BOOT
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for Traverse Technologies Ten64 board, based
|
|
on NXP LS1088A.
|
|
|
|
config ARCH_UNIPHIER
|
|
bool "Socionext UniPhier SoCs"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_I2C
|
|
select DM_MMC
|
|
select DM_MTD
|
|
select DM_RESET
|
|
select DM_SERIAL
|
|
select OF_BOARD_SETUP
|
|
select OF_CONTROL
|
|
select OF_LIBFDT
|
|
select PINCTRL
|
|
select SPL_BOARD_INIT if SPL
|
|
select SPL_DM if SPL
|
|
select SPL_LIBCOMMON_SUPPORT if SPL
|
|
select SPL_LIBGENERIC_SUPPORT if SPL
|
|
select SPL_OF_CONTROL if SPL
|
|
select SPL_PINCTRL if SPL
|
|
select SUPPORT_SPL
|
|
imply CMD_DM
|
|
imply DISTRO_DEFAULTS
|
|
imply FAT_WRITE
|
|
help
|
|
Support for UniPhier SoC family developed by Socionext Inc.
|
|
(formerly, System LSI Business Division of Panasonic Corporation)
|
|
|
|
config ARCH_SYNQUACER
|
|
bool "Socionext SynQuacer SoCs"
|
|
select ARM64
|
|
select DM
|
|
select GIC_V3
|
|
select PSCI_RESET
|
|
select SYSRESET
|
|
select SYSRESET_PSCI
|
|
select OF_CONTROL
|
|
help
|
|
Support for SynQuacer SoC family developed by Socionext Inc.
|
|
This SoC is used on 96boards EE DeveloperBox.
|
|
|
|
config ARCH_STM32
|
|
bool "Support STMicroelectronics STM32 MCU with cortex M"
|
|
select CPU_V7M
|
|
select DM
|
|
select DM_SERIAL
|
|
imply CMD_DM
|
|
|
|
config ARCH_STI
|
|
bool "Support STMicroelectronics SoCs"
|
|
select BLK
|
|
select CPU_V7A
|
|
select DM
|
|
select DM_MMC
|
|
select DM_RESET
|
|
select DM_SERIAL
|
|
imply CMD_DM
|
|
help
|
|
Support for STMicroelectronics STiH407/10 SoC family.
|
|
This SoC is used on Linaro 96Board STiH410-B2260
|
|
|
|
config ARCH_STM32MP
|
|
bool "Support STMicroelectronics STM32MP Socs with cortex A"
|
|
select ARCH_MISC_INIT
|
|
select ARCH_SUPPORT_TFABOOT
|
|
select BOARD_LATE_INIT
|
|
select CLK
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_RESET
|
|
select DM_SERIAL
|
|
select MISC
|
|
select OF_CONTROL
|
|
select OF_LIBFDT
|
|
select OF_SYSTEM_SETUP
|
|
select PINCTRL
|
|
select REGMAP
|
|
select SYSCON
|
|
select SYSRESET
|
|
select SYS_THUMB_BUILD
|
|
imply SPL_SYSRESET
|
|
imply CMD_DM
|
|
imply CMD_POWEROFF
|
|
imply OF_LIBFDT_OVERLAY
|
|
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
imply USE_PREBOOT
|
|
imply TIMESTAMP
|
|
help
|
|
Support for STM32MP SoC family developed by STMicroelectronics,
|
|
MPUs based on ARM cortex A core
|
|
U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL).
|
|
FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot
|
|
chain.
|
|
SPL is the unsecure FSBL for the basic boot chain.
|
|
|
|
config ARCH_ROCKCHIP
|
|
bool "Support Rockchip SoCs"
|
|
select BLK
|
|
select BINMAN if SPL_OPTEE || SPL
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_I2C
|
|
select DM_MMC
|
|
select DM_PWM
|
|
select DM_REGULATOR
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_SPI_FLASH
|
|
select ENABLE_ARM_SOC_BOOT0_HOOK
|
|
select OF_CONTROL
|
|
select SPI
|
|
select SPL_DM if SPL
|
|
select SPL_DM_SPI if SPL
|
|
select SPL_DM_SPI_FLASH if SPL
|
|
select SYS_MALLOC_F
|
|
select SYS_THUMB_BUILD if !ARM64
|
|
imply ADC
|
|
imply CMD_DM
|
|
imply DEBUG_UART_BOARD_INIT
|
|
imply DISTRO_DEFAULTS
|
|
imply FAT_WRITE
|
|
imply SARADC_ROCKCHIP
|
|
imply SPL_SYSRESET
|
|
imply SPL_SYS_MALLOC_SIMPLE
|
|
imply SYS_NS16550
|
|
imply TPL_SYSRESET
|
|
imply USB_FUNCTION_FASTBOOT
|
|
|
|
config ARCH_OCTEONTX
|
|
bool "Support OcteonTX SoCs"
|
|
select CLK
|
|
select DM
|
|
select GPIO_EXTRA_HEADER
|
|
select ARM64
|
|
select OF_CONTROL
|
|
select OF_LIVE
|
|
select BOARD_LATE_INIT
|
|
select SYS_CACHE_SHIFT_7
|
|
select SYS_PCI_64BIT if PCI
|
|
imply OF_HAS_PRIOR_STAGE
|
|
|
|
config ARCH_OCTEONTX2
|
|
bool "Support OcteonTX2 SoCs"
|
|
select CLK
|
|
select DM
|
|
select GPIO_EXTRA_HEADER
|
|
select ARM64
|
|
select OF_CONTROL
|
|
select OF_LIVE
|
|
select BOARD_LATE_INIT
|
|
select SYS_CACHE_SHIFT_7
|
|
select SYS_PCI_64BIT if PCI
|
|
imply OF_HAS_PRIOR_STAGE
|
|
|
|
config TARGET_THUNDERX_88XX
|
|
bool "Support ThunderX 88xx"
|
|
select ARM64
|
|
select GPIO_EXTRA_HEADER
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
select SYS_CACHE_SHIFT_7
|
|
|
|
config ARCH_ASPEED
|
|
bool "Support Aspeed SoCs"
|
|
select DM
|
|
select OF_CONTROL
|
|
imply CMD_DM
|
|
|
|
config TARGET_DURIAN
|
|
bool "Support Phytium Durian Platform"
|
|
select ARM64
|
|
select GPIO_EXTRA_HEADER
|
|
help
|
|
Support for durian platform.
|
|
It has 2GB Sdram, uart and pcie.
|
|
|
|
config TARGET_POMELO
|
|
bool "Support Phytium Pomelo Platform"
|
|
select ARM64
|
|
select DM
|
|
select AHCI
|
|
select SCSI_AHCI
|
|
select AHCI_PCI
|
|
select BLK
|
|
select PCI
|
|
select DM_PCI
|
|
select SCSI
|
|
select DM_SCSI
|
|
select DM_SERIAL
|
|
imply CMD_PCI
|
|
help
|
|
Support for pomelo platform.
|
|
It has 8GB Sdram, uart and pcie.
|
|
|
|
config TARGET_PRESIDIO_ASIC
|
|
bool "Support Cortina Presidio ASIC Platform"
|
|
select ARM64
|
|
select GICV2
|
|
|
|
config TARGET_XENGUEST_ARM64
|
|
bool "Xen guest ARM64"
|
|
select ARM64
|
|
select XEN
|
|
select OF_CONTROL
|
|
select LINUX_KERNEL_IMAGE_HEADER
|
|
select XEN_SERIAL
|
|
select SSCANF
|
|
imply OF_HAS_PRIOR_STAGE
|
|
|
|
config ARCH_GXP
|
|
bool "Support HPE GXP SoCs"
|
|
select DM
|
|
select OF_CONTROL
|
|
imply CMD_DM
|
|
|
|
endchoice
|
|
|
|
config SUPPORT_PASSING_ATAGS
|
|
bool "Support pre-devicetree ATAG-based booting"
|
|
depends on !ARM64
|
|
imply SETUP_MEMORY_TAGS
|
|
help
|
|
Support for booting older Linux kernels, using ATAGs rather than
|
|
passing a devicetree. This is option is rarely used, and the
|
|
semantics are defined at
|
|
https://www.kernel.org/doc/Documentation/arm/Booting at section 4a.
|
|
|
|
config SETUP_MEMORY_TAGS
|
|
bool "Pass memory size information via ATAG"
|
|
depends on SUPPORT_PASSING_ATAGS
|
|
|
|
config CMDLINE_TAG
|
|
bool "Pass Linux kernel cmdline via ATAG"
|
|
depends on SUPPORT_PASSING_ATAGS
|
|
|
|
config INITRD_TAG
|
|
bool "Pass initrd starting point and size via ATAG"
|
|
depends on SUPPORT_PASSING_ATAGS
|
|
|
|
config REVISION_TAG
|
|
bool "Pass system revision via ATAG"
|
|
depends on SUPPORT_PASSING_ATAGS
|
|
|
|
config SERIAL_TAG
|
|
bool "Pass system serial number via ATAG"
|
|
depends on SUPPORT_PASSING_ATAGS
|
|
|
|
config STATIC_MACH_TYPE
|
|
bool "Statically define the Machine ID number"
|
|
default y if TARGET_DS109 || TARGET_NOKIA_RX51 || TARGET_DS414 || DEFAULT_DEVICE_TREE = "sun7i-a20-icnova-swac"
|
|
help
|
|
When booting via ATAGs, enable this option if we know the correct
|
|
machine ID number to use at compile time. Some systems will be
|
|
passed the number dynamically by whatever loads U-Boot.
|
|
|
|
config MACH_TYPE
|
|
int "Machine ID number"
|
|
depends on STATIC_MACH_TYPE
|
|
default 527 if TARGET_DS109
|
|
default 1955 if TARGET_NOKIA_RX51
|
|
default 3036 if TARGET_DS414
|
|
default 4283 if DEFAULT_DEVICE_TREE = "sun7i-a20-icnova-swac"
|
|
help
|
|
When booting via ATAGs, the machine type must be passed as a number.
|
|
For the full list see https://www.arm.linux.org.uk/developer/machines
|
|
|
|
config ARCH_SUPPORT_TFABOOT
|
|
bool
|
|
|
|
config TFABOOT
|
|
bool "Support for booting from TF-A"
|
|
depends on ARCH_SUPPORT_TFABOOT
|
|
help
|
|
Some platforms support the setup of secure registers (for instance
|
|
for CPU errata handling) or provide secure services like PSCI.
|
|
Those services could also be provided by other firmware parts
|
|
like TF-A (Trusted Firmware for Cortex-A), in which case U-Boot
|
|
does not need to (and cannot) execute this code.
|
|
Enabling this option will make a U-Boot binary that is relying
|
|
on other firmware layers to provide secure functionality.
|
|
|
|
config TI_SECURE_DEVICE
|
|
bool "HS Device Type Support"
|
|
depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
|
|
help
|
|
If a high secure (HS) device type is being used, this config
|
|
must be set. This option impacts various aspects of the
|
|
build system (to create signed boot images that can be
|
|
authenticated) and the code. See the doc/README.ti-secure
|
|
file for further details.
|
|
|
|
config SYS_KWD_CONFIG
|
|
string "kwbimage config file path"
|
|
depends on ARCH_KIRKWOOD || ARCH_MVEBU
|
|
default "arch/arm/mach-mvebu/kwbimage.cfg"
|
|
help
|
|
Path within the source directory to the kwbimage.cfg file to use
|
|
when packaging the U-Boot image for use.
|
|
|
|
source "arch/arm/mach-apple/Kconfig"
|
|
|
|
source "arch/arm/mach-aspeed/Kconfig"
|
|
|
|
source "arch/arm/mach-at91/Kconfig"
|
|
|
|
source "arch/arm/mach-bcm283x/Kconfig"
|
|
|
|
source "arch/arm/mach-bcmbca/Kconfig"
|
|
|
|
source "arch/arm/mach-bcmstb/Kconfig"
|
|
|
|
source "arch/arm/mach-davinci/Kconfig"
|
|
|
|
source "arch/arm/mach-exynos/Kconfig"
|
|
|
|
source "arch/arm/mach-hpe/gxp/Kconfig"
|
|
|
|
source "arch/arm/mach-highbank/Kconfig"
|
|
|
|
source "arch/arm/mach-integrator/Kconfig"
|
|
|
|
source "arch/arm/mach-ipq40xx/Kconfig"
|
|
|
|
source "arch/arm/mach-k3/Kconfig"
|
|
|
|
source "arch/arm/mach-keystone/Kconfig"
|
|
|
|
source "arch/arm/mach-kirkwood/Kconfig"
|
|
|
|
source "arch/arm/mach-lpc32xx/Kconfig"
|
|
|
|
source "arch/arm/mach-mvebu/Kconfig"
|
|
|
|
source "arch/arm/mach-octeontx/Kconfig"
|
|
|
|
source "arch/arm/mach-octeontx2/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx3/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx5/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx6/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx7/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx7ulp/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/imx8/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/imx8m/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/imx8ulp/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/imx9/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/imxrt/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mxs/Kconfig"
|
|
|
|
source "arch/arm/mach-omap2/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
|
|
|
|
source "arch/arm/mach-orion5x/Kconfig"
|
|
|
|
source "arch/arm/mach-owl/Kconfig"
|
|
|
|
source "arch/arm/mach-rmobile/Kconfig"
|
|
|
|
source "arch/arm/mach-meson/Kconfig"
|
|
|
|
source "arch/arm/mach-mediatek/Kconfig"
|
|
|
|
source "arch/arm/mach-qemu/Kconfig"
|
|
|
|
source "arch/arm/mach-rockchip/Kconfig"
|
|
|
|
source "arch/arm/mach-s5pc1xx/Kconfig"
|
|
|
|
source "arch/arm/mach-snapdragon/Kconfig"
|
|
|
|
source "arch/arm/mach-socfpga/Kconfig"
|
|
|
|
source "arch/arm/mach-sti/Kconfig"
|
|
|
|
source "arch/arm/mach-stm32/Kconfig"
|
|
|
|
source "arch/arm/mach-stm32mp/Kconfig"
|
|
|
|
source "arch/arm/mach-sunxi/Kconfig"
|
|
|
|
source "arch/arm/mach-tegra/Kconfig"
|
|
|
|
source "arch/arm/mach-u8500/Kconfig"
|
|
|
|
source "arch/arm/mach-uniphier/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv7/vf610/Kconfig"
|
|
|
|
source "arch/arm/mach-zynq/Kconfig"
|
|
|
|
source "arch/arm/mach-zynqmp/Kconfig"
|
|
|
|
source "arch/arm/mach-versal/Kconfig"
|
|
|
|
source "arch/arm/mach-versal-net/Kconfig"
|
|
|
|
source "arch/arm/mach-zynqmp-r5/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv7/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv8/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/Kconfig"
|
|
|
|
source "arch/arm/mach-nexell/Kconfig"
|
|
|
|
source "arch/arm/mach-npcm/Kconfig"
|
|
|
|
source "board/armltd/total_compute/Kconfig"
|
|
source "board/armltd/corstone1000/Kconfig"
|
|
source "board/bosch/shc/Kconfig"
|
|
source "board/bosch/guardian/Kconfig"
|
|
source "board/Marvell/octeontx/Kconfig"
|
|
source "board/Marvell/octeontx2/Kconfig"
|
|
source "board/armltd/vexpress/Kconfig"
|
|
source "board/armltd/vexpress64/Kconfig"
|
|
source "board/cortina/presidio-asic/Kconfig"
|
|
source "board/broadcom/bcmns3/Kconfig"
|
|
source "board/cavium/thunderx/Kconfig"
|
|
source "board/eets/pdu001/Kconfig"
|
|
source "board/emulation/qemu-arm/Kconfig"
|
|
source "board/freescale/ls2080aqds/Kconfig"
|
|
source "board/freescale/ls2080ardb/Kconfig"
|
|
source "board/freescale/ls1088a/Kconfig"
|
|
source "board/freescale/ls1028a/Kconfig"
|
|
source "board/freescale/ls1021aqds/Kconfig"
|
|
source "board/freescale/ls1043aqds/Kconfig"
|
|
source "board/freescale/ls1021atwr/Kconfig"
|
|
source "board/freescale/ls1021atsn/Kconfig"
|
|
source "board/freescale/ls1021aiot/Kconfig"
|
|
source "board/freescale/ls1046aqds/Kconfig"
|
|
source "board/freescale/ls1043ardb/Kconfig"
|
|
source "board/freescale/ls1046ardb/Kconfig"
|
|
source "board/freescale/ls1046afrwy/Kconfig"
|
|
source "board/freescale/ls1012aqds/Kconfig"
|
|
source "board/freescale/ls1012ardb/Kconfig"
|
|
source "board/freescale/ls1012afrdm/Kconfig"
|
|
source "board/freescale/lx2160a/Kconfig"
|
|
source "board/grinn/chiliboard/Kconfig"
|
|
source "board/hisilicon/hikey/Kconfig"
|
|
source "board/hisilicon/hikey960/Kconfig"
|
|
source "board/hisilicon/poplar/Kconfig"
|
|
source "board/isee/igep003x/Kconfig"
|
|
source "board/kontron/sl28/Kconfig"
|
|
source "board/myir/mys_6ulx/Kconfig"
|
|
source "board/samsung/common/Kconfig"
|
|
source "board/siemens/common/Kconfig"
|
|
source "board/seeed/npi_imx6ull/Kconfig"
|
|
source "board/socionext/developerbox/Kconfig"
|
|
source "board/st/stv0991/Kconfig"
|
|
source "board/tcl/sl50/Kconfig"
|
|
source "board/traverse/ten64/Kconfig"
|
|
source "board/variscite/dart_6ul/Kconfig"
|
|
source "board/vscom/baltos/Kconfig"
|
|
source "board/phytium/durian/Kconfig"
|
|
source "board/phytium/pomelo/Kconfig"
|
|
source "board/xen/xenguest_arm64/Kconfig"
|
|
|
|
source "arch/arm/Kconfig.debug"
|
|
|
|
endmenu
|