u-boot/configs/xilinx_zynqmp_virt_defconfig
Tom Rini c316ee674f Xilinx changes for v2022.10
cpu:
 - Add driver for microblaze cpu
 
 net:
 - Add support for DM_ETH_PHY to AXI emac and emaclite
 
 xilinx:
 - Switch platforms to DM_ETH_PHY
 - DT chagnes in ZynqMP and Zynq
 - Enable support for SquashFS
 
 zynqmp:
 - Add support for KR260 boards
 - Move BSS from address 0
 - Move platform identification from board code to soc driver
 - Improve zynqmp_psu_init_minimize
 
 versal:
 - Enable loading app at EL1
 
 serial:
 - Setup default address and clock rates for DEBUG uarts
 
 pinctrl:
 - Add support for tri state and output enable properties
 
 relocate-rela:
 - Clean relocate-rela implementation for ARM64
 - Add support for Microblaze
 
 microblaze:
 - Add support for runtime relocation
 - Rework cache handling (wiring, Kconfig) based on cpuinfo
 - Remove interrupt support
 
 timer:
 - Extract axi timer driver from Microblaze to generic location
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYrlYngAKCRDKSWXLKUoM
 ITgbAJ9S9xO2QqxtuodWAYMtJfvZ14c7mgCeKnyFTrrBnJkC0wPsGqE71oNJ49o=
 =3gGm
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2022.10

cpu:
- Add driver for microblaze cpu

net:
- Add support for DM_ETH_PHY to AXI emac and emaclite

xilinx:
- Switch platforms to DM_ETH_PHY
- DT chagnes in ZynqMP and Zynq
- Enable support for SquashFS

zynqmp:
- Add support for KR260 boards
- Move BSS from address 0
- Move platform identification from board code to soc driver
- Improve zynqmp_psu_init_minimize

versal:
- Enable loading app at EL1

serial:
- Setup default address and clock rates for DEBUG uarts

pinctrl:
- Add support for tri state and output enable properties

relocate-rela:
- Clean relocate-rela implementation for ARM64
- Add support for Microblaze

microblaze:
- Add support for runtime relocation
- Rework cache handling (wiring, Kconfig) based on cpuinfo
- Remove interrupt support

timer:
- Extract axi timer driver from Microblaze to generic location
2022-06-27 10:15:50 -04:00

235 lines
6.3 KiB
Text

CONFIG_ARM=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_SYS_MALLOC_LEN=0x4040000
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
CONFIG_SPL_STACK_R_ADDR=0x18000000
CONFIG_SPL_SIZE_LIMIT=0x2a000
CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ZYNQ_MAC_IN_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
CONFIG_CMD_FRU=y
CONFIG_ZYNQMP_USB=y
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_AHCI=y
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="run scsi_init;usb start"
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x0
CONFIG_SPL_BSS_MAX_SIZE=0x80000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xfffffffc
CONFIG_SPL_STACK_R=y
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000
CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
CONFIG_SPL_FPGA=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_SPL_ARGS_ADDR=0x8000000
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
CONFIG_SPL_ATF=y
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2073
CONFIG_CMD_BOOTMENU=y
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_SHA1SUM=y
CONFIG_CMD_BIND=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FPGA_LOADBP=y
CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_FPGA_LOAD_SECURE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_PWM=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SDRAM=y
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_WDT=y
CONFIG_BOOTP_MAY_FAIL=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_RTC=y
CONFIG_CMD_TIME=y
CONFIG_CMD_GETTIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_TPM=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_MTDPARTS_SPREAD=y
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
CONFIG_CMD_UBI=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_BOARD=y
CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu106-rev1.0 zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1 zynqmp-sm-k26-revA zynqmp-smk-k26-revA zynqmp-dlc21-revA"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus power-domains"
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_FAT_DEVICE_AND_PART=":auto"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SATA=y
CONFIG_SCSI_AHCI=y
CONFIG_SATA_CEVA=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK_ZYNQMP=y
CONFIG_DFU_TFTP=y
CONFIG_DFU_TIMEOUT=y
CONFIG_DFU_MMC=y
CONFIG_DFU_MTD=y
CONFIG_DFU_NAND=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1800000
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
CONFIG_GPIO_HOG=y
CONFIG_XILINX_GPIO=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_ARASAN=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_MAX_CHIPS=2
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI_DP83867=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_XILINX_GMII2RGMII=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH_PHY=y
CONFIG_XILINX_AXIEMAC=y
CONFIG_ZYNQ_GEM=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_PWM=y
CONFIG_PWM_CADENCE_TTC=y
CONFIG_DM_RTC=y
CONFIG_RTC_EMULATION=y
CONFIG_RTC_ZYNQMP=y
CONFIG_SCSI=y
CONFIG_DM_SCSI=y
CONFIG_ARM_DCC=y
CONFIG_XILINX_UARTLITE=y
CONFIG_ZYNQ_SERIAL=y
CONFIG_SOC_XILINX_ZYNQMP=y
CONFIG_SPI=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQMP_GQSPI=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_CMD_POWEROFF=y
CONFIG_SYSRESET_PSCI=y
CONFIG_TPM2_TIS_SPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
CONFIG_USB_FUNCTION_THOR=y
CONFIG_USB_ETHER=y
CONFIG_USB_ETH_CDC=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_COPY=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_SEPS525=y
CONFIG_LCD=y
CONFIG_SPLASH_SCREEN=y
CONFIG_BMP_16BPP=y
CONFIG_BMP_24BPP=y
CONFIG_BMP_32BPP=y
CONFIG_WDT=y
CONFIG_PANIC_HANG=y
CONFIG_TPM=y
CONFIG_SPL_GZIP=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_EFI_SET_TIME=y
CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
CONFIG_EFI_CAPSULE_ON_DISK=y
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y