u-boot/arch/arm/cpu/ixp/npe/include/IxEthAccMac_p.h
Peter Tyser 84ad688473 arm: Move cpu/$CPU to arch/arm/cpu/$CPU
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:24 +02:00

248 lines
8.5 KiB
C

/*
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
#ifndef IxEthAccMac_p_H
#define IxEthAccMac_p_H
#include "IxOsal.h"
#define IX_ETH_ACC_MAX_MULTICAST_ADDRESSES 256
#define IX_ETH_ACC_NUM_PORTS 3
#define IX_ETH_ACC_MAX_FRAME_SIZE_DEFAULT 1536
#define IX_ETH_ACC_MAX_FRAME_SIZE_UPPER_RANGE (65536-64)
#define IX_ETH_ACC_MAX_FRAME_SIZE_LOWER_RANGE 64
/*
*
* MAC register definitions
*
*/
#define IX_ETH_ACC_MAC_0_BASE IX_OSAL_IXP400_ETHA_PHYS_BASE
#define IX_ETH_ACC_MAC_1_BASE IX_OSAL_IXP400_ETHB_PHYS_BASE
#define IX_ETH_ACC_MAC_2_BASE IX_OSAL_IXP400_ETH_NPEA_PHYS_BASE
#define IX_ETH_ACC_MAC_TX_CNTRL1 0x000
#define IX_ETH_ACC_MAC_TX_CNTRL2 0x004
#define IX_ETH_ACC_MAC_RX_CNTRL1 0x010
#define IX_ETH_ACC_MAC_RX_CNTRL2 0x014
#define IX_ETH_ACC_MAC_RANDOM_SEED 0x020
#define IX_ETH_ACC_MAC_THRESH_P_EMPTY 0x030
#define IX_ETH_ACC_MAC_THRESH_P_FULL 0x038
#define IX_ETH_ACC_MAC_BUF_SIZE_TX 0x040
#define IX_ETH_ACC_MAC_TX_DEFER 0x050
#define IX_ETH_ACC_MAC_RX_DEFER 0x054
#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1 0x060
#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2 0x064
#define IX_ETH_ACC_MAC_SLOT_TIME 0x070
#define IX_ETH_ACC_MAC_MDIO_CMD_1 0x080
#define IX_ETH_ACC_MAC_MDIO_CMD_2 0x084
#define IX_ETH_ACC_MAC_MDIO_CMD_3 0x088
#define IX_ETH_ACC_MAC_MDIO_CMD_4 0x08c
#define IX_ETH_ACC_MAC_MDIO_STS_1 0x090
#define IX_ETH_ACC_MAC_MDIO_STS_2 0x094
#define IX_ETH_ACC_MAC_MDIO_STS_3 0x098
#define IX_ETH_ACC_MAC_MDIO_STS_4 0x09c
#define IX_ETH_ACC_MAC_ADDR_MASK_1 0x0A0
#define IX_ETH_ACC_MAC_ADDR_MASK_2 0x0A4
#define IX_ETH_ACC_MAC_ADDR_MASK_3 0x0A8
#define IX_ETH_ACC_MAC_ADDR_MASK_4 0x0AC
#define IX_ETH_ACC_MAC_ADDR_MASK_5 0x0B0
#define IX_ETH_ACC_MAC_ADDR_MASK_6 0x0B4
#define IX_ETH_ACC_MAC_ADDR_1 0x0C0
#define IX_ETH_ACC_MAC_ADDR_2 0x0C4
#define IX_ETH_ACC_MAC_ADDR_3 0x0C8
#define IX_ETH_ACC_MAC_ADDR_4 0x0CC
#define IX_ETH_ACC_MAC_ADDR_5 0x0D0
#define IX_ETH_ACC_MAC_ADDR_6 0x0D4
#define IX_ETH_ACC_MAC_INT_CLK_THRESH 0x0E0
#define IX_ETH_ACC_MAC_UNI_ADDR_1 0x0F0
#define IX_ETH_ACC_MAC_UNI_ADDR_2 0x0F4
#define IX_ETH_ACC_MAC_UNI_ADDR_3 0x0F8
#define IX_ETH_ACC_MAC_UNI_ADDR_4 0x0FC
#define IX_ETH_ACC_MAC_UNI_ADDR_5 0x100
#define IX_ETH_ACC_MAC_UNI_ADDR_6 0x104
#define IX_ETH_ACC_MAC_CORE_CNTRL 0x1FC
/*
*
*Bit definitions
*
*/
/* TX Control Register 1*/
#define IX_ETH_ACC_TX_CNTRL1_TX_EN BIT(0)
#define IX_ETH_ACC_TX_CNTRL1_DUPLEX BIT(1)
#define IX_ETH_ACC_TX_CNTRL1_RETRY BIT(2)
#define IX_ETH_ACC_TX_CNTRL1_PAD_EN BIT(3)
#define IX_ETH_ACC_TX_CNTRL1_FCS_EN BIT(4)
#define IX_ETH_ACC_TX_CNTRL1_2DEFER BIT(5)
#define IX_ETH_ACC_TX_CNTRL1_RMII BIT(6)
/* TX Control Register 2 */
#define IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK 0xf
/* RX Control Register 1 */
#define IX_ETH_ACC_RX_CNTRL1_RX_EN BIT(0)
#define IX_ETH_ACC_RX_CNTRL1_PADSTRIP_EN BIT(1)
#define IX_ETH_ACC_RX_CNTRL1_CRC_EN BIT(2)
#define IX_ETH_ACC_RX_CNTRL1_PAUSE_EN BIT(3)
#define IX_ETH_ACC_RX_CNTRL1_LOOP_EN BIT(4)
#define IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN BIT(5)
#define IX_ETH_ACC_RX_CNTRL1_RX_RUNT_EN BIT(6)
#define IX_ETH_ACC_RX_CNTRL1_BCAST_DIS BIT(7)
/* RX Control Register 2 */
#define IX_ETH_ACC_RX_CNTRL2_DEFER_EN BIT(0)
/* Core Control Register */
#define IX_ETH_ACC_CORE_RESET BIT(0)
#define IX_ETH_ACC_CORE_RX_FIFO_FLUSH BIT(1)
#define IX_ETH_ACC_CORE_TX_FIFO_FLUSH BIT(2)
#define IX_ETH_ACC_CORE_SEND_JAM BIT(3)
#define IX_ETH_ACC_CORE_MDC_EN BIT(4)
/* 1st bit of 1st MAC octet */
#define IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT ( 1)
/*
*
* Default values
*
*/
#define IX_ETH_ACC_TX_CNTRL1_DEFAULT (IX_ETH_ACC_TX_CNTRL1_TX_EN | \
IX_ETH_ACC_TX_CNTRL1_RETRY | \
IX_ETH_ACC_TX_CNTRL1_FCS_EN | \
IX_ETH_ACC_TX_CNTRL1_2DEFER | \
IX_ETH_ACC_TX_CNTRL1_PAD_EN)
#define IX_ETH_ACC_TX_MAX_RETRIES_DEFAULT 0x0f
#define IX_ETH_ACC_RX_CNTRL1_DEFAULT (IX_ETH_ACC_RX_CNTRL1_CRC_EN \
| IX_ETH_ACC_RX_CNTRL1_RX_EN)
#define IX_ETH_ACC_RX_CNTRL2_DEFAULT 0x0
/* Thresholds determined by NPE firmware FS */
#define IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT 0x12
#define IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT 0x30
/* Number of bytes that must be in the tx fifo before
transmission commences*/
#define IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT 0x8
/* One-part deferral values */
#define IX_ETH_ACC_MAC_TX_DEFER_DEFAULT 0x15
#define IX_ETH_ACC_MAC_RX_DEFER_DEFAULT 0x16
/* Two-part deferral values... */
#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT 0x08
#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT 0x07
/* This value applies to MII */
#define IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT 0x80
/* This value applies to RMII */
#define IX_ETH_ACC_MAC_SLOT_TIME_RMII_DEFAULT 0xFF
#define IX_ETH_ACC_MAC_ADDR_MASK_DEFAULT 0xFF
#define IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT 0x1
/*The following is a value chosen at random*/
#define IX_ETH_ACC_RANDOM_SEED_DEFAULT 0x8
/*By default we must configure the MAC to generate the
MDC clock*/
#define IX_ETH_ACC_CORE_DEFAULT (IX_ETH_ACC_CORE_MDC_EN)
#define IXP425_ETH_ACC_MAX_PHY 2
#define IXP425_ETH_ACC_MAX_AN_ENTRIES 20
#define IX_ETH_ACC_MAC_RESET_DELAY 1
#define IX_ETH_ACC_MAC_ALL_BITS_SET 0xFF
#define IX_ETH_ACC_MAC_MSGID_SHL 24
#define IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS 20
#define IX_ETH_ACC_PORT_DISABLE_DELAY_COUNT 200 /* 4 seconds timeout */
#define IX_ETH_ACC_PORT_DISABLE_RETRY_COUNT 3
#define IX_ETH_ACC_MIB_STATS_DELAY_MSECS 2000 /* 2 seconds delay for ethernet stats */
/*Register access macros*/
#if (CPU == SIMSPARCSOLARIS)
extern void registerWriteStub (UINT32 base, UINT32 offset, UINT32 val);
extern UINT32 registerReadStub (UINT32 base, UINT32 offset);
#define REG_WRITE(b,o,v) registerWriteStub(b, o, v)
#define REG_READ(b,o,v) do { v = registerReadStub(b, o); } while (0)
#else
#define REG_WRITE(b,o,v) IX_OSAL_WRITE_LONG((volatile UINT32 *)(b + o), v)
#define REG_READ(b,o,v) (v = IX_OSAL_READ_LONG((volatile UINT32 *)(b + o)))
#endif
void ixEthAccMacUnload(void);
IxEthAccStatus ixEthAccMacMemInit(void);
/* MAC core loopback */
IxEthAccStatus ixEthAccPortLoopbackEnable(IxEthAccPortId portId);
IxEthAccStatus ixEthAccPortLoopbackDisable(IxEthAccPortId portId);
/* MAC core traffic control */
IxEthAccStatus ixEthAccPortTxEnablePriv(IxEthAccPortId portId);
IxEthAccStatus ixEthAccPortTxDisablePriv(IxEthAccPortId portId);
IxEthAccStatus ixEthAccPortRxEnablePriv(IxEthAccPortId portId);
IxEthAccStatus ixEthAccPortRxDisablePriv(IxEthAccPortId portId);
IxEthAccStatus ixEthAccPortMacResetPriv(IxEthAccPortId portId);
/* NPE software loopback */
IxEthAccStatus ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId);
IxEthAccStatus ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId);
#endif /*IxEthAccMac_p_H*/