Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-29 22:43:10 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs/aristainetos2.h
Tom Rini eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h 
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00

440 lines
14 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2015
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* Based on:
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* Configuration settings for the Freescale i.MX6DL aristainetos2 board.
*/
#ifndef __ARISTAINETOS2_CONFIG_H
#define __ARISTAINETOS2_CONFIG_H
#define CONFIG_HOSTNAME "aristainetos2"
#if (CONFIG_SYS_BOARD_VERSION == 5)
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONSOLE_DEV "ttymxc1"
#elif (CONFIG_SYS_BOARD_VERSION == 6)
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONSOLE_DEV "ttymxc0"
#endif
/* Framebuffer */
#define CONFIG_SYS_LDB_CLOCK 28341000
#include "mx6_common.h"
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
#ifdef CONFIG_IMX_HAB
#define HAB_EXTRA_SETTINGS \
"hab_check_addr=" \
"if hab_auth_img ${check_addr} ${filesize} ; then " \
"true;" \
"else " \
"echo \"HAB checks ${hab_check_filetype} " \
"failed!\"; " \
"false; " \
"fi;\0" \
"hab_check_file_fit=" \
"if env exists enable_hab_check && test " \
"${enable_hab_check} -eq 1 ; then " \
"setenv hab_check_filetype \"FIT file on SD card " \
"or eMMC\";" \
"env set check_addr ${fit_addr_r};" \
"run hab_check_addr;" \
"else " \
"true; "\
"fi;\0" \
"hab_check_file_bootscript=" \
"if env exists enable_hab_check && test " \
"${enable_hab_check} -eq 1 ; then " \
"setenv hab_check_filetype \"Bootscript file\";" \
"env set check_addr ${loadaddr};" \
"run hab_check_addr;" \
"else " \
"true; "\
"fi;\0" \
"hab_check_flash_fit=" \
"if env exists enable_hab_check && test " \
"${enable_hab_check} -eq 1 ; then " \
"setenv hab_check_filetype \"FIT files on flash\";" \
"env set check_addr ${fit_addr_r};" \
"run hab_check_addr;" \
"else " \
"true; "\
"fi;\0" \
"enable_hab_check=1\0"
#else
#define HAB_EXTRA_SETTINGS \
"hab_check_addr=echo HAB check addr always returns " \
"true;true\0" \
"hab_check_file_fit=echo HAB check FIT file always returns " \
"true;true\0" \
"hab_check_flash_fit=echo HAB check flash FIT always returns " \
"true;true\0" \
"hab_check_file_bootscript=echo HAB check bootscript always " \
"returns true;true\0" \
"enable_hab_check=0\0"
#endif
#if (CONFIG_SYS_BOARD_VERSION == 5)
#define EXTRA_ENV_BOARD_SETTINGS \
"dead=while true; do; " \
"led led_red on; sleep 1;" \
"led led_red off; sleep 1;" \
"done\0"
#elif (CONFIG_SYS_BOARD_VERSION == 6)
#define EXTRA_ENV_BOARD_SETTINGS \
"dead=while true; do; " \
"led led_red on; led led_red2 on; sleep 1;" \
"led led_red off; led led_red2 off;; sleep 1;" \
"done\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"disable_giga=yes\0" \
"usb_pgood_delay=2000\0" \
"nor_bootdelay=-2\0" \
"script=u-boot.scr\0" \
"loadaddr=0x12000000\0" \
"fit_addr_r=0x14000000\0" \
"uboot_sz=d0000\0" \
"panel=lb07wv8\0" \
"splashpos=m,m\0" \
"console=" CONSOLE_DEV "\0" \
"emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
"mtdids=nor0=spi0.0\0" \
"mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
"-(ubi-nor)\0" \
"mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \
"mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \
"mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \
"mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \
"mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \
"addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
"bootmode=${bootmode} rng_core.default_quality=1000 " \
"mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
"get_env=mw ${loadaddr} 0 0x20000;" \
"mmc rescan;" \
"ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
"env import -t ${loadaddr}\0" \
"default_env=gpio set wp_spi_nor.gpio-hog;" \
"sf probe;" \
"sf protect unlock 0 0x1000000;" \
"mw ${loadaddr} 0 0x20000;" \
"env export -t ${loadaddr} serial# ethaddr " \
"board_type panel;" \
"env default -a;" \
"env import -t ${loadaddr}\0" \
"loadbootscript=" \
"ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${script};\0" \
"loadbootscriptUSB=" \
"ext4load usb 0 ${loadaddr} ${script};\0" \
"loadbootscriptUSBf=" \
"fatload usb 0 ${loadaddr} ${script};\0" \
"bootscriptUSB=echo Running bootscript from usb-stick ...; " \
"source \0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source \0" \
"mmcpart=1\0" \
"mmcdev=0\0" \
"emmcpart=1\0" \
"emmcdev=1\0" \
"sysnum=1\0" \
"rescue_sysnum=0\0" \
"rreason=18\0" \
"mainboot=echo Booting from eMMC ...; " \
"run mainargs addmtd addmisc;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"mainargs=setenv bootargs console=${console},${baudrate} " \
"root=${emmcroot} rootfstype=ext4\0 " \
"main_load_fit=run mk_fitfile_path; " \
"ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
"${fit_file}; " \
"imi ${fit_addr_r}\0 " \
"rescue_load_fit=run mk_rescue_fitfile_path; " \
"ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
"${rescue_fit_file}; " \
"imi ${fit_addr_r}\0" \
"main_load_pubkey=run mk_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
"${pubkey}\0" \
"rescue_load_pubkey=run mk_rescue_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
"${pubkey}\0" \
"mainRargs=setenv bootargs console=${console},${baudrate} " \
"rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
"mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"mmcRargs=setenv bootargs console=${console},${baudrate} " \
"rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs addmtd addmisc;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"mmc_load_fit=run mk_fitfile_path; " \
"ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
"imi ${fit_addr_r}\0" \
"mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \
"ext4load mmc ${mmcdev}:${mmcpart} " \
"${fit_addr_r} ${rescue_fit_file}\0" \
"imi ${fit_addr_r}\0" \
"mmc_load_uboot=run mk_uboot_path; " \
"ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${uboot}\0" \
"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
"setexpr uboot_maxsize ${uboot_sz} - 400;" \
"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
"sf write ${loadaddr} 400 ${filesize};" \
"sf read ${cmp_buf} 400 ${uboot_sz};" \
"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
"mmc_load_pubkey=run mk_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${pubkey}\0" \
"mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${pubkey}\0" \
"rescueboot=echo Booting rescue system ...; " \
"run addmtd addmisc;" \
"if test -n ${rescue_reason}; then run rescue_reason;fi;" \
"run boot_board_type;" \
"if bootm ${fit_addr_r}; then ; " \
"else " \
"run dead; " \
"fi; \0" \
"r_reason_syserr=setenv rescue_reason setenv bootargs " \
"\\\\${bootargs} " \
"rescueReason=$rreason\0 " \
"usb_load_fit=run mk_fitfile_path; " \
"ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
"usb_load_fitf=run mk_fitfile_path; " \
"fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
"usb_load_rescuefit=run mk_rescue_fitfile_path; " \
"ext4load usb 0 ${fit_addr_r} " \
"${rescue_fit_file}\0" \
"usb_load_rescuefitf=run mk_rescue_fitfile_path; " \
"fatload usb 0 ${fit_addr_r} " \
"${rescue_fit_file}\0" \
"usb_load_pubkey=run mk_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load usb 0 ${loadaddr} ${pubkey}\0" \
"usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load usb 0 ${loadaddr} ${pubkey}\0" \
"usb_load_pubkeyf=run mk_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"fatload usb 0 ${loadaddr} ${pubkey}\0" \
"usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"fatload usb 0 ${loadaddr} ${pubkey}\0" \
"usbroot=/dev/sda1 rootwait rw\0" \
"usbboot=echo Booting from usb-stick ...; " \
"run usbargs addmtd addmisc;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"usbargs=setenv bootargs console=${console},${baudrate} " \
"root=${usbroot}\0" \
"usbRargs=setenv bootargs console=${console},${baudrate} " \
"rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \
"mmc_rescue_boot=" \
"run r_reason_syserr;" \
"if run mmc_rescue_load_pubkey hab_check_addr " \
"mmc_rescue_load_fit hab_check_file_fit; then " \
"run mmcRargs; run rescueboot; " \
"else " \
"echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
"run dead; " \
"fi;\0" \
"main_rescue_boot=" \
"if run main_load_pubkey hab_check_addr " \
"main_load_fit hab_check_flash_fit; then " \
"if run mainboot; then ; " \
"else " \
"run r_reason_syserr;" \
"if run rescue_load_pubkey hab_check_addr " \
"rescue_load_fit hab_check_file_fit; then " \
"run mainRargs; run rescueboot; " \
"else " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
"run dead; " \
"fi; " \
"fi; " \
"else " \
"run r_reason_syserr;" \
"if run rescue_load_pubkey hab_check_addr " \
"rescue_load_fit hab_check_file_fit; then " \
"run mainRargs; run rescueboot; " \
"else " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
"run dead; " \
"fi; " \
"fi;\0" \
"usb_mmc_rescue_boot=" \
"usb start;" \
"if usb storage; then " \
"if run loadbootscriptUSB " \
"hab_check_file_bootscript;" \
"then run bootscriptUSB; " \
"fi; " \
"if run loadbootscriptUSBf " \
"hab_check_file_bootscript;" \
"then run bootscriptUSB; " \
"fi; " \
"if run usb_load_pubkey hab_check_addr " \
"usb_load_fit hab_check_file_fit; then " \
"run usbboot; " \
"fi; " \
"if run usb_load_pubkeyf hab_check_addr " \
"usb_load_fitf hab_check_file_fit; then " \
"run usbboot; " \
"fi; "\
"if run usb_rescue_load_pubkey hab_check_addr " \
"usb_load_rescuefit hab_check_file_fit; then " \
"run r_reason_syserr usbRargs; run rescueboot;" \
"fi; " \
"if run usb_rescue_load_pubkeyf hab_check_addr " \
"usb_load_rescuefitf hab_check_file_fit; then " \
"run r_reason_syserr usbRargs; run rescueboot;" \
"fi; " \
"run mmc_rescue_boot;" \
"fi; "\
"run mmc_rescue_boot;\0" \
"rescue_xload_boot=" \
"run r_reason_syserr;" \
"if test ${bootmode} -ne 0 ; then " \
"mmc dev ${mmcdev};" \
"if mmc rescan; then " \
"if run mmc_rescue_load_pubkey " \
"hab_check_addr " \
"mmc_rescue_load_fit " \
"hab_check_file_fit; then " \
"run mmcRargs; run rescueboot; " \
"else " \
"usb start;" \
"if usb storage; then " \
"if run usb_rescue_load_pubkey " \
"hab_check_addr " \
"usb_load_rescuefit " \
"hab_check_file_fit; then " \
"run usbRargs; run rescueboot;" \
"fi; " \
"if run usb_rescue_load_pubkeyf " \
"hab_check_addr " \
"usb_load_rescuefitf " \
"hab_check_file_fit; then " \
"run usbRargs; run rescueboot;" \
"fi; " \
"fi;" \
"fi;" \
"echo RESCUE SYSTEM ON SD OR " \
"USB BOOT FAILURE;" \
"run dead; " \
"else " \
"usb start;" \
"if usb storage; then " \
"if run usb_rescue_load_pubkey " \
"hab_check_addr " \
"usb_load_rescuefit " \
"hab_check_file_fit; then " \
"run usbRargs; run rescueboot;" \
"fi; " \
"if run usb_rescue_load_pubkeyf " \
"hab_check_addr " \
"usb_load_rescuefitf " \
"hab_check_file_fit; then " \
"run usbRargs; run rescueboot;" \
"fi; " \
"fi;" \
"echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
"run dead; " \
"fi; " \
"else "\
"if run rescue_load_pubkey hab_check_addr " \
"rescue_load_fit hab_check_file_fit; then " \
"run mainRargs; run rescueboot; " \
"else " \
"echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
"run dead; " \
"fi; " \
"fi;\0" \
"ari_boot=if test ${bootmode} -ne 0 ; then " \
"mmc dev ${mmcdev};" \
"if mmc rescan; then " \
"if run loadbootscript hab_check_file_bootscript;" \
"then run bootscript; " \
"fi; " \
"if run mmc_load_pubkey hab_check_addr " \
"mmc_load_fit hab_check_file_fit; then " \
"if run mmcboot; then ; " \
"else " \
"run mmc_rescue_boot;" \
"fi; " \
"else " \
"run usb_mmc_rescue_boot;" \
"fi; " \
"else " \
"run usb_mmc_rescue_boot;" \
"fi; " \
"else "\
"run main_rescue_boot;" \
"fi; \0"\
HAB_EXTRA_SETTINGS \
EXTRA_ENV_BOARD_SETTINGS
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_FSL_USDHC_NUM 2
/* DMA stuff, needed for GPMI/MXS NAND support */
/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
/* UBI support */
/* Framebuffer */
/* check this console not needed, after test remove it */
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
"sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
#endif /* __ARISTAINETOS2_CONFIG_H */
Reference in a new issue View git blame Copy permalink