u-boot/include/configs/k2e_evm.h
Tom Rini a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00

52 lines
1.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuration header file for TI's k2e-evm
*
* (C) Copyright 2012-2014
* Texas Instruments Incorporated, <www.ti.com>
*/
#ifndef __CONFIG_K2E_EVM_H
#define __CONFIG_K2E_EVM_H
#include <environment/ti/spi.h>
/* Platform type */
#define CONFIG_SOC_K2E
#ifdef CONFIG_TI_SECURE_DEVICE
#define DEFAULT_SEC_BOOT_ENV \
DEFAULT_FIT_TI_ARGS \
"findfdt=setenv fdtfile ${name_fdt}\0"
#else
#define DEFAULT_SEC_BOOT_ENV
#endif
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
DEFAULT_SEC_BOOT_ENV \
"boot=ubi\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
"name_fdt=keystone-k2e-evm.dtb\0" \
"name_mon=skern-k2e.bin\0" \
"name_ubi=k2e-evm-ubifs.ubi\0" \
"name_uboot=u-boot-spi-k2e-evm.gph\0" \
"name_fs=arago-console-image-k2e-evm.cpio.gz\0"
#include <configs/ti_armv7_keystone2.h>
#define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 9
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
#define CONFIG_DDR_SPD
#endif /* __CONFIG_K2E_EVM_H */