Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 02:08:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/phy/mv88e6352.c
Valentin Longchamp b737337aaf net/phy: support the mv88e6352 switch 
This patch add support for the configuration of an external switch from
the 88E6xxx series from Marvell trough an MDIO link using indirect
adressing. This can be used if we do not want to use an EEPROM for the
configuration.

This driver is not generic and was not tested on other switches than the
88e6352. This is proposed as a first implementation that is somewhat
limited but works and that can be used as a basis for further
developments for this switch family.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Joe Hershberger <joe.hershberger@gmail.com>
2012-09-27 12:21:56 -05:00

318 lines
6.8 KiB
C
Raw Blame History

/*
* (C) Copyright 2012
* Valentin Lontgchamp, Keymile AG, valentin.longchamp@keymile.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <miiphy.h>
#include <asm/errno.h>
#include <mv88e6352.h>
#define SMI_HDR ((0x8 | 0x1) << 12)
#define SMI_BUSY_MASK (0x8000)
#define SMIRD_OP (0x2 << 10)
#define SMIWR_OP (0x1 << 10)
#define SMI_MASK 0x1f
#define PORT_SHIFT 5
#define COMMAND_REG 0
#define DATA_REG 1
/* global registers */
#define GLOBAL 0x1b
#define GLOBAL_STATUS 0x00
#define PPU_STATE 0x8000
#define GLOBAL_CTRL 0x04
#define SW_RESET 0x8000
#define PPU_ENABLE 0x4000
static int sw_wait_rdy(const char *devname, u8 phy_addr)
{
u16 command;
u32 timeout = 100;
int ret;
/* wait till the SMI is not busy */
do {
/* read command register */
ret = miiphy_read(devname, phy_addr, COMMAND_REG, &command);
if (ret < 0) {
printf("%s: Error reading command register\n",
__func__);
return ret;
}
if (timeout-- == 0) {
printf("Err..(%s) SMI busy timeout\n", __func__);
return -EFAULT;
}
} while (command & SMI_BUSY_MASK);
return 0;
}
static int sw_reg_read(const char *devname, u8 phy_addr, u8 port,
u8 reg, u16 *data)
{
int ret;
u16 command;
ret = sw_wait_rdy(devname, phy_addr);
if (ret)
return ret;
command = SMI_HDR | SMIRD_OP | ((port&SMI_MASK) << PORT_SHIFT) |
(reg & SMI_MASK);
debug("%s: write to command: %#x\n", __func__, command);
ret = miiphy_write(devname, phy_addr, COMMAND_REG, command);
if (ret)
return ret;
ret = sw_wait_rdy(devname, phy_addr);
if (ret)
return ret;
ret = miiphy_read(devname, phy_addr, DATA_REG, data);
return ret;
}
static int sw_reg_write(const char *devname, u8 phy_addr, u8 port,
u8 reg, u16 data)
{
int ret;
u16 value;
ret = sw_wait_rdy(devname, phy_addr);
if (ret)
return ret;
debug("%s: write to data: %#x\n", __func__, data);
ret = miiphy_write(devname, phy_addr, DATA_REG, data);
if (ret)
return ret;
value = SMI_HDR | SMIWR_OP | ((port & SMI_MASK) << PORT_SHIFT) |
(reg & SMI_MASK);
debug("%s: write to command: %#x\n", __func__, value);
ret = miiphy_write(devname, phy_addr, COMMAND_REG, value);
if (ret)
return ret;
ret = sw_wait_rdy(devname, phy_addr);
if (ret)
return ret;
return 0;
}
static int ppu_enable(const char *devname, u8 phy_addr)
{
int i, ret = 0;
u16 reg;
ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, &reg);
if (ret) {
printf("%s: Error reading global ctrl reg\n", __func__);
return ret;
}
reg |= PPU_ENABLE;
ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
if (ret) {
printf("%s: Error writing global ctrl reg\n", __func__);
return ret;
}
for (i = 0; i < 1000; i++) {
sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
&reg);
if ((reg & 0xc000) == 0xc000)
return 0;
udelay(1000);
}
return -ETIMEDOUT;
}
static int ppu_disable(const char *devname, u8 phy_addr)
{
int i, ret = 0;
u16 reg;
ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, &reg);
if (ret) {
printf("%s: Error reading global ctrl reg\n", __func__);
return ret;
}
reg &= ~PPU_ENABLE;
ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
if (ret) {
printf("%s: Error writing global ctrl reg\n", __func__);
return ret;
}
for (i = 0; i < 1000; i++) {
sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
&reg);
if ((reg & 0xc000) != 0xc000)
return 0;
udelay(1000);
}
return -ETIMEDOUT;
}
int mv88e_sw_program(const char *devname, u8 phy_addr,
struct mv88e_sw_reg *regs, int regs_nb)
{
int i, ret = 0;
/* first we need to disable the PPU */
ret = ppu_disable(devname, phy_addr);
if (ret) {
printf("%s: Error disabling PPU\n", __func__);
return ret;
}
for (i = 0; i < regs_nb; i++) {
ret = sw_reg_write(devname, phy_addr, regs[i].port,
regs[i].reg, regs[i].value);
if (ret) {
printf("%s: Error configuring switch\n", __func__);
ppu_enable(devname, phy_addr);
return ret;
}
}
/* re-enable the PPU */
ret = ppu_enable(devname, phy_addr);
if (ret) {
printf("%s: Error enabling PPU\n", __func__);
return ret;
}
return 0;
}
int mv88e_sw_reset(const char *devname, u8 phy_addr)
{
int i, ret = 0;
u16 reg;
ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, &reg);
if (ret) {
printf("%s: Error reading global ctrl reg\n", __func__);
return ret;
}
reg = SW_RESET | PPU_ENABLE | 0x0400;
ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
if (ret) {
printf("%s: Error writing global ctrl reg\n", __func__);
return ret;
}
for (i = 0; i < 1000; i++) {
sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
&reg);
if ((reg & 0xc800) != 0xc800)
return 0;
udelay(1000);
}
return -ETIMEDOUT;
}
int do_mvsw_reg_read(const char *name, int argc, char * const argv[])
{
u16 value = 0, phyaddr, reg, port;
int ret;
phyaddr = simple_strtoul(argv[1], NULL, 10);
port = simple_strtoul(argv[2], NULL, 10);
reg = simple_strtoul(argv[3], NULL, 10);
ret = sw_reg_read(name, phyaddr, port, reg, &value);
printf("%#x\n", value);
return ret;
}
int do_mvsw_reg_write(const char *name, int argc, char * const argv[])
{
u16 value = 0, phyaddr, reg, port;
int ret;
phyaddr = simple_strtoul(argv[1], NULL, 10);
port = simple_strtoul(argv[2], NULL, 10);
reg = simple_strtoul(argv[3], NULL, 10);
value = simple_strtoul(argv[4], NULL, 16);
ret = sw_reg_write(name, phyaddr, port, reg, value);
return ret;
}
int do_mvsw_reg(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int ret;
const char *cmd, *ethname;
if (argc < 2)
return cmd_usage(cmdtp);
cmd = argv[1];
--argc;
++argv;
if (strcmp(cmd, "read") == 0) {
if (argc < 5)
return cmd_usage(cmdtp);
ethname = argv[1];
--argc;
++argv;
ret = do_mvsw_reg_read(ethname, argc, argv);
} else if (strcmp(cmd, "write") == 0) {
if (argc < 6)
return cmd_usage(cmdtp);
ethname = argv[1];
--argc;
++argv;
ret = do_mvsw_reg_write(ethname, argc, argv);
} else
return cmd_usage(cmdtp);
return ret;
}
U_BOOT_CMD(
mvsw_reg, 7, 1, do_mvsw_reg,
"marvell 88e6352 switch register access",
"write ethname phyaddr port reg value\n"
"mvsw_reg read ethname phyaddr port reg\n"
);
Reference in a new issue View git blame Copy permalink