u-boot/drivers/net/phy/broadcom.c
Andy Fleming 9082eeac5d phylib: Add a bunch of PHY drivers from tsec
The tsec driver had a bunch of PHY drivers already written. This
converts them all into PHY Lib drivers, and serves as the first
set of PHY drivers for PHY Lib.

While doing that, cleaned up a number of magic numbers (though
not all of them, as PHY vendors like to keep their numbers as
magical as possible).  Also, noticed that almost all of the
vitesse/cicada PHYs had the same config/parse/startup functions,
so those have been collapsed into one.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:34 -05:00

288 lines
7.4 KiB
C

/*
* Broadcom PHY drivers
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
* author Andy Fleming
*
*/
#include <config.h>
#include <common.h>
#include <phy.h>
/* Broadcom BCM54xx -- taken from linux sungem_phy */
#define MIIM_BCM54xx_AUXCNTL 0x18
#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) (((val & 0x7) << 12)|(val & 0x7))
#define MIIM_BCM54xx_AUXSTATUS 0x19
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
#define MIIM_BCM54XX_SHD 0x1c
#define MIIM_BCM54XX_SHD_WRITE 0x8000
#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
(MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
MIIM_BCM54XX_SHD_DATA(data))
#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
/* Broadcom BCM5461S */
static int bcm5461_config(struct phy_device *phydev)
{
genphy_config_aneg(phydev);
phy_reset(phydev);
return 0;
}
static int bcm54xx_parse_status(struct phy_device *phydev)
{
unsigned int mii_reg;
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXSTATUS);
switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
case 1:
phydev->duplex = DUPLEX_HALF;
phydev->speed = SPEED_10;
break;
case 2:
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_10;
break;
case 3:
phydev->duplex = DUPLEX_HALF;
phydev->speed = SPEED_100;
break;
case 5:
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_100;
break;
case 6:
phydev->duplex = DUPLEX_HALF;
phydev->speed = SPEED_1000;
break;
case 7:
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_1000;
break;
default:
printf("Auto-neg error, defaulting to 10BT/HD\n");
phydev->duplex = DUPLEX_HALF;
phydev->speed = SPEED_10;
break;
}
return 0;
}
static int bcm54xx_startup(struct phy_device *phydev)
{
/* Read the Status (2x to make sure link is right) */
genphy_update_link(phydev);
bcm54xx_parse_status(phydev);
return 0;
}
/* Broadcom BCM5482S */
/*
* "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
* circumstances. eg a gigabit TSEC connected to a gigabit switch with
* a 4-wire ethernet cable. Both ends advertise gigabit, but can't
* link. "Ethernet@Wirespeed" reduces advertised speed until link
* can be achieved.
*/
static u32 bcm5482_read_wirespeed(struct phy_device *phydev, u32 reg)
{
return (phy_read(phydev, MDIO_DEVAD_NONE, reg) & 0x8FFF) | 0x8010;
}
static int bcm5482_config(struct phy_device *phydev)
{
unsigned int reg;
/* reset the PHY */
reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
reg |= BMCR_RESET;
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg);
/* Setup read from auxilary control shadow register 7 */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL,
MIIM_BCM54xx_AUXCNTL_ENCODE(7));
/* Read Misc Control register and or in Ethernet@Wirespeed */
reg = bcm5482_read_wirespeed(phydev, MIIM_BCM54xx_AUXCNTL);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg);
/* Initial config/enable of secondary SerDes interface */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf));
/* Write intial value to secondary SerDes Contol */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
MIIM_BCM54XX_EXP_SEL_SSD | 0);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA,
BMCR_ANRESTART);
/* Enable copper/fiber auto-detect */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201));
genphy_config_aneg(phydev);
return 0;
}
/*
* Find out if PHY is in copper or serdes mode by looking at Expansion Reg
* 0x42 - "Operating Mode Status Register"
*/
static int bcm5482_is_serdes(struct phy_device *phydev)
{
u16 val;
int serdes = 0;
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
MIIM_BCM54XX_EXP_SEL_ER | 0x42);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
switch (val & 0x1f) {
case 0x0d: /* RGMII-to-100Base-FX */
case 0x0e: /* RGMII-to-SGMII */
case 0x0f: /* RGMII-to-SerDes */
case 0x12: /* SGMII-to-SerDes */
case 0x13: /* SGMII-to-100Base-FX */
case 0x16: /* SerDes-to-Serdes */
serdes = 1;
break;
case 0x6: /* RGMII-to-Copper */
case 0x14: /* SGMII-to-Copper */
case 0x17: /* SerDes-to-Copper */
break;
default:
printf("ERROR, invalid PHY mode (0x%x\n)", val);
break;
}
return serdes;
}
/*
* Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
* Mode Status Register"
*/
static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev)
{
u16 val;
int i = 0;
/* Wait 1s for link - Clause 37 autonegotiation happens very fast */
while (1) {
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
MIIM_BCM54XX_EXP_SEL_ER | 0x42);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
if (val & 0x8000)
break;
if (i++ > 1000) {
phydev->link = 0;
return 1;
}
udelay(1000); /* 1 ms */
}
phydev->link = 1;
switch ((val >> 13) & 0x3) {
case (0x00):
phydev->speed = 10;
break;
case (0x01):
phydev->speed = 100;
break;
case (0x02):
phydev->speed = 1000;
break;
}
phydev->duplex = (val & 0x1000) == 0x1000;
return 0;
}
/*
* Figure out if BCM5482 is in serdes or copper mode and determine link
* configuration accordingly
*/
static int bcm5482_startup(struct phy_device *phydev)
{
if (bcm5482_is_serdes(phydev)) {
bcm5482_parse_serdes_sr(phydev);
phydev->port = PORT_FIBRE;
} else {
/* Wait for auto-negotiation to complete or fail */
genphy_update_link(phydev);
/* Parse BCM54xx copper aux status register */
bcm54xx_parse_status(phydev);
}
return 0;
}
static struct phy_driver BCM5461S_driver = {
.name = "Broadcom BCM5461S",
.uid = 0x2060c0,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &bcm5461_config,
.startup = &bcm54xx_startup,
.shutdown = &genphy_shutdown,
};
static struct phy_driver BCM5464S_driver = {
.name = "Broadcom BCM5464S",
.uid = 0x2060b0,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &bcm5461_config,
.startup = &bcm54xx_startup,
.shutdown = &genphy_shutdown,
};
static struct phy_driver BCM5482S_driver = {
.name = "Broadcom BCM5482S",
.uid = 0x143bcb0,
.mask = 0xffffff0,
.features = PHY_GBIT_FEATURES,
.config = &bcm5482_config,
.startup = &bcm5482_startup,
.shutdown = &genphy_shutdown,
};
int phy_broadcom_init(void)
{
phy_register(&BCM5482S_driver);
phy_register(&BCM5464S_driver);
phy_register(&BCM5461S_driver);
return 0;
}