u-boot/drivers/spi/omap3_spi.c
Faiz Abbas afd4f15a39 spi: omap3_spi: Read platform data in ofdata_to_platdata()
Add an ofdata_to_platdata() callback to access dts in U-boot and
access all platform data in it. This prepares the driver for supporting
both device tree as well as static platform data structures in SPL.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-09-15 18:51:53 +05:30

515 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
* Christophe Ricard <christophe.ricard@gmail.com>
*
* Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
*
* Driver for McSPI controller on OMAP3. Based on davinci_spi.c
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
*
* Copyright (C) 2007 Atmel Corporation
*
* Parts taken from linux/drivers/spi/omap2_mcspi.c
* Copyright (C) 2005, 2006 Nokia Corporation
*
* Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
*/
#include <common.h>
#include <dm.h>
#include <spi.h>
#include <malloc.h>
#include <asm/io.h>
#include <linux/bitops.h>
#include <omap3_spi.h>
DECLARE_GLOBAL_DATA_PTR;
struct omap2_mcspi_platform_config {
unsigned int regs_offset;
};
struct omap3_spi_priv {
struct mcspi *regs;
unsigned int cs;
unsigned int freq;
unsigned int mode;
unsigned int wordlen;
unsigned int pin_dir:1;
};
static void omap3_spi_write_chconf(struct omap3_spi_priv *priv, int val)
{
writel(val, &priv->regs->channel[priv->cs].chconf);
/* Flash post writes to make immediate effect */
readl(&priv->regs->channel[priv->cs].chconf);
}
static void omap3_spi_set_enable(struct omap3_spi_priv *priv, int enable)
{
writel(enable, &priv->regs->channel[priv->cs].chctrl);
/* Flash post writes to make immediate effect */
readl(&priv->regs->channel[priv->cs].chctrl);
}
static int omap3_spi_write(struct omap3_spi_priv *priv, unsigned int len,
const void *txp, unsigned long flags)
{
ulong start;
int i, chconf;
chconf = readl(&priv->regs->channel[priv->cs].chconf);
/* Enable the channel */
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
for (i = 0; i < len; i++) {
/* wait till TX register is empty (TXS == 1) */
start = get_timer(0);
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_TXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI TXS timed out, status=0x%08x\n",
readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Write the data */
unsigned int *tx = &priv->regs->channel[priv->cs].tx;
if (priv->wordlen > 16)
writel(((u32 *)txp)[i], tx);
else if (priv->wordlen > 8)
writel(((u16 *)txp)[i], tx);
else
writel(((u8 *)txp)[i], tx);
}
/* wait to finish of transfer */
while ((readl(&priv->regs->channel[priv->cs].chstat) &
(OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS)) !=
(OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS))
;
/* Disable the channel otherwise the next immediate RX will get affected */
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
static int omap3_spi_read(struct omap3_spi_priv *priv, unsigned int len,
void *rxp, unsigned long flags)
{
int i, chconf;
ulong start;
chconf = readl(&priv->regs->channel[priv->cs].chconf);
/* Enable the channel */
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
writel(0, &priv->regs->channel[priv->cs].tx);
for (i = 0; i < len; i++) {
start = get_timer(0);
/* Wait till RX register contains data (RXS == 1) */
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_RXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI RXS timed out, status=0x%08x\n",
readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Disable the channel to prevent furher receiving */
if (i == (len - 1))
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
/* Read the data */
unsigned int *rx = &priv->regs->channel[priv->cs].rx;
if (priv->wordlen > 16)
((u32 *)rxp)[i] = readl(rx);
else if (priv->wordlen > 8)
((u16 *)rxp)[i] = (u16)readl(rx);
else
((u8 *)rxp)[i] = (u8)readl(rx);
}
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
/*McSPI Transmit Receive Mode*/
static int omap3_spi_txrx(struct omap3_spi_priv *priv, unsigned int len,
const void *txp, void *rxp, unsigned long flags)
{
ulong start;
int chconf, i = 0;
chconf = readl(&priv->regs->channel[priv->cs].chconf);
/*Enable SPI channel*/
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
/*set TRANSMIT-RECEIVE Mode*/
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
/*Shift in and out 1 byte at time*/
for (i=0; i < len; i++){
/* Write: wait for TX empty (TXS == 1)*/
start = get_timer(0);
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_TXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI TXS timed out, status=0x%08x\n",
readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Write the data */
unsigned int *tx = &priv->regs->channel[priv->cs].tx;
if (priv->wordlen > 16)
writel(((u32 *)txp)[i], tx);
else if (priv->wordlen > 8)
writel(((u16 *)txp)[i], tx);
else
writel(((u8 *)txp)[i], tx);
/*Read: wait for RX containing data (RXS == 1)*/
start = get_timer(0);
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_RXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI RXS timed out, status=0x%08x\n",
readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Read the data */
unsigned int *rx = &priv->regs->channel[priv->cs].rx;
if (priv->wordlen > 16)
((u32 *)rxp)[i] = readl(rx);
else if (priv->wordlen > 8)
((u16 *)rxp)[i] = (u16)readl(rx);
else
((u8 *)rxp)[i] = (u8)readl(rx);
}
/* Disable the channel */
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
/*if transfer must be terminated disable the channel*/
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
static int _spi_xfer(struct omap3_spi_priv *priv, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
unsigned int len;
int ret = -1;
if (priv->wordlen < 4 || priv->wordlen > 32) {
printf("omap3_spi: invalid wordlen %d\n", priv->wordlen);
return -1;
}
if (bitlen % priv->wordlen)
return -1;
len = bitlen / priv->wordlen;
if (bitlen == 0) { /* only change CS */
int chconf = readl(&priv->regs->channel[priv->cs].chconf);
if (flags & SPI_XFER_BEGIN) {
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
}
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
}
ret = 0;
} else {
if (dout != NULL && din != NULL)
ret = omap3_spi_txrx(priv, len, dout, din, flags);
else if (dout != NULL)
ret = omap3_spi_write(priv, len, dout, flags);
else if (din != NULL)
ret = omap3_spi_read(priv, len, din, flags);
}
return ret;
}
static void _omap3_spi_set_speed(struct omap3_spi_priv *priv)
{
uint32_t confr, div = 0;
confr = readl(&priv->regs->channel[priv->cs].chconf);
/* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
if (priv->freq) {
while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
> priv->freq)
div++;
} else {
div = 0xC;
}
/* set clock divisor */
confr &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
confr |= div << 2;
omap3_spi_write_chconf(priv, confr);
}
static void _omap3_spi_set_mode(struct omap3_spi_priv *priv)
{
uint32_t confr;
confr = readl(&priv->regs->channel[priv->cs].chconf);
/* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
* REVISIT: this controller could support SPI_3WIRE mode.
*/
if (priv->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
confr &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
confr |= OMAP3_MCSPI_CHCONF_DPE0;
} else {
confr &= ~OMAP3_MCSPI_CHCONF_DPE0;
confr |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
}
/* set SPI mode 0..3 */
confr &= ~(OMAP3_MCSPI_CHCONF_POL | OMAP3_MCSPI_CHCONF_PHA);
if (priv->mode & SPI_CPHA)
confr |= OMAP3_MCSPI_CHCONF_PHA;
if (priv->mode & SPI_CPOL)
confr |= OMAP3_MCSPI_CHCONF_POL;
/* set chipselect polarity; manage with FORCE */
if (!(priv->mode & SPI_CS_HIGH))
confr |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
else
confr &= ~OMAP3_MCSPI_CHCONF_EPOL;
/* Transmit & receive mode */
confr &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
omap3_spi_write_chconf(priv, confr);
}
static void _omap3_spi_set_wordlen(struct omap3_spi_priv *priv)
{
unsigned int confr;
/* McSPI individual channel configuration */
confr = readl(&priv->regs->channel[priv->cs].chconf);
/* wordlength */
confr &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
confr |= (priv->wordlen - 1) << 7;
omap3_spi_write_chconf(priv, confr);
}
static void spi_reset(struct mcspi *regs)
{
unsigned int tmp;
writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &regs->sysconfig);
do {
tmp = readl(&regs->sysstatus);
} while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
OMAP3_MCSPI_SYSCONFIG_SMARTIDLE, &regs->sysconfig);
writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &regs->wakeupenable);
}
static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
{
unsigned int conf;
/*
* setup when switching from (reset default) slave mode
* to single-channel master mode
*/
conf = readl(&priv->regs->modulctrl);
conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
writel(conf, &priv->regs->modulctrl);
}
static int omap3_spi_claim_bus(struct udevice *dev)
{
struct udevice *bus = dev->parent;
struct omap3_spi_priv *priv = dev_get_priv(bus);
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
priv->cs = slave_plat->cs;
priv->freq = slave_plat->max_hz;
_omap3_spi_claim_bus(priv);
return 0;
}
static int omap3_spi_release_bus(struct udevice *dev)
{
struct udevice *bus = dev->parent;
struct omap3_spi_priv *priv = dev_get_priv(bus);
writel(OMAP3_MCSPI_MODULCTRL_MS, &priv->regs->modulctrl);
return 0;
}
static int omap3_spi_set_wordlen(struct udevice *dev, unsigned int wordlen)
{
struct udevice *bus = dev->parent;
struct omap3_spi_priv *priv = dev_get_priv(bus);
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
priv->cs = slave_plat->cs;
priv->wordlen = wordlen;
_omap3_spi_set_wordlen(priv);
return 0;
}
static int omap3_spi_probe(struct udevice *dev)
{
struct omap3_spi_priv *priv = dev_get_priv(dev);
struct omap3_spi_plat *plat = dev_get_platdata(dev);
priv->regs = plat->regs;
priv->pin_dir = plat->pin_dir;
priv->wordlen = SPI_DEFAULT_WORDLEN;
spi_reset(priv->regs);
return 0;
}
static int omap3_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct udevice *bus = dev->parent;
struct omap3_spi_priv *priv = dev_get_priv(bus);
return _spi_xfer(priv, bitlen, dout, din, flags);
}
static int omap3_spi_set_speed(struct udevice *dev, unsigned int speed)
{
struct omap3_spi_priv *priv = dev_get_priv(dev);
priv->freq = speed;
_omap3_spi_set_speed(priv);
return 0;
}
static int omap3_spi_set_mode(struct udevice *dev, uint mode)
{
struct omap3_spi_priv *priv = dev_get_priv(dev);
priv->mode = mode;
_omap3_spi_set_mode(priv);
return 0;
}
static const struct dm_spi_ops omap3_spi_ops = {
.claim_bus = omap3_spi_claim_bus,
.release_bus = omap3_spi_release_bus,
.set_wordlen = omap3_spi_set_wordlen,
.xfer = omap3_spi_xfer,
.set_speed = omap3_spi_set_speed,
.set_mode = omap3_spi_set_mode,
/*
* cs_info is not needed, since we require all chip selects to be
* in the device tree explicitly
*/
};
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
static struct omap2_mcspi_platform_config omap2_pdata = {
.regs_offset = 0,
};
static struct omap2_mcspi_platform_config omap4_pdata = {
.regs_offset = OMAP4_MCSPI_REG_OFFSET,
};
static int omap3_spi_ofdata_to_platdata(struct udevice *dev)
{
struct omap2_mcspi_platform_config *data =
(struct omap2_mcspi_platform_config *)dev_get_driver_data(dev);
struct omap3_spi_plat *plat = dev_get_platdata(dev);
plat->regs = (struct mcspi *)(dev_read_addr(dev) + data->regs_offset);
if (dev_read_bool(dev, "ti,pindir-d0-out-d1-in"))
plat->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
else
plat->pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT;
return 0;
}
static const struct udevice_id omap3_spi_ids[] = {
{ .compatible = "ti,omap2-mcspi", .data = (ulong)&omap2_pdata },
{ .compatible = "ti,omap4-mcspi", .data = (ulong)&omap4_pdata },
{ }
};
#endif
U_BOOT_DRIVER(omap3_spi) = {
.name = "omap3_spi",
.id = UCLASS_SPI,
.flags = DM_FLAG_PRE_RELOC,
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = omap3_spi_ids,
.ofdata_to_platdata = omap3_spi_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct omap3_spi_plat),
#endif
.probe = omap3_spi_probe,
.ops = &omap3_spi_ops,
.priv_auto_alloc_size = sizeof(struct omap3_spi_priv),
};