u-boot/drivers/usb/dwc3/Kconfig
Neil Armstrong 46eddbc58f usb: dwc3: add Amlogic GXL & GXL DWC3 Glue
The USB support was initialy done with a set of PHYs and dwc3-of-simple
because the architecture of the USB complex was not understood correctly
at the time (and proper documentation was missing...).

But with the G12A family, the USB complex was correctly understood and
implemented correctly.

This adds a proper driver for the glue, based on the G12A one, but with
enough changes to require a different driver in U-Boot.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05 17:59:45 +02:00

73 lines
2 KiB
Text

config USB_DWC3
bool "DesignWare USB3 DRD Core Support"
depends on USB_HOST || USB_GADGET
help
Say Y here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
if USB_DWC3
config USB_DWC3_GADGET
bool "USB Gadget support for DWC3"
default y
depends on USB_GADGET
select USB_GADGET_DUALSPEED
comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
bool "Texas Instruments OMAP5 and similar Platforms"
help
Some platforms from Texas Instruments like OMAP5, DRA7xxx and
AM437x use this IP for USB2/3 functionality.
Say 'Y' here if you have one such device
config USB_DWC3_GENERIC
bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue)"
depends on DM_USB && USB_DWC3 && MISC
help
Select this for Xilinx ZynqMP and similar Platforms.
This wrapper supports Host and Peripheral operation modes.
config USB_DWC3_MESON_G12A
bool "Amlogic Meson G12A USB wrapper"
depends on DM_USB && USB_DWC3 && ARCH_MESON
imply PHY
help
Select this for Amlogic Meson G12A Platforms.
This wrapper supports Host and Peripheral operation modes.
config USB_DWC3_MESON_GXL
bool "Amlogic Meson GXL USB wrapper"
depends on DM_USB && USB_DWC3 && ARCH_MESON
imply PHY
help
Select this for Amlogic Meson GXL and GXM Platforms.
This wrapper supports Host and Peripheral operation modes.
config USB_DWC3_UNIPHIER
bool "DesignWare USB3 Host Support on UniPhier Platforms"
depends on ARCH_UNIPHIER && USB_XHCI_DWC3
help
Support of USB2/3 functionality in Socionext UniPhier platforms.
Say 'Y' here if you have one such device.
menu "PHY Subsystem"
config USB_DWC3_PHY_OMAP
bool "TI OMAP SoC series USB DRD PHY driver"
help
Enable single driver for both USB2 PHY programming and USB3 PHY
programming for TI SoCs.
config USB_DWC3_PHY_SAMSUNG
bool "Exynos5 SoC series USB DRD PHY driver"
help
Enable USB DRD PHY support for Exynos 5 SoC series.
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
endmenu
endif