u-boot/arch/x86/include/asm/intel_pinctrl.h
Simon Glass 59cf26480b x86: pinctrl: Drop the acpi_path member
This is in the device tree now, so drop the unnecessary field here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00

318 lines
10 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2017 Intel Corporation.
* Copyright 2019 Google LLC
*
* Modified from coreboot gpio.h
*/
#ifndef __ASM_INTEL_PINCTRL_H
#define __ASM_INTEL_PINCTRL_H
#include <dm/pinctrl.h>
#include <linux/bitops.h>
/**
* struct pad_config - config for a pad
* @pad: offset of pad within community
* @pad_config: Pad config data corresponding to DW0, DW1, etc.
*/
struct pad_config {
int pad;
u32 pad_config[4];
};
#include <asm/arch/gpio.h>
/* GPIO community IOSF sideband clock gating */
#define MISCCFG_GPSIDEDPCGEN BIT(5)
/* GPIO community RCOMP clock gating */
#define MISCCFG_GPRCOMPCDLCGEN BIT(4)
/* GPIO community RTC clock gating */
#define MISCCFG_GPRTCDLCGEN BIT(3)
/* GFX controller clock gating */
#define MISCCFG_GSXSLCGEN BIT(2)
/* GPIO community partition clock gating */
#define MISCCFG_GPDPCGEN BIT(1)
/* GPIO community local clock gating */
#define MISCCFG_GPDLCGEN BIT(0)
/* Enable GPIO community power management configuration */
#define MISCCFG_ENABLE_GPIO_PM_CONFIG (MISCCFG_GPSIDEDPCGEN | \
MISCCFG_GPRCOMPCDLCGEN | MISCCFG_GPRTCDLCGEN | MISCCFG_GSXSLCGEN \
| MISCCFG_GPDPCGEN | MISCCFG_GPDLCGEN)
/*
* GPIO numbers may not be contiguous and instead will have a different
* starting pin number for each pad group.
*/
#define INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
group_pad_base) \
{ \
.first_pad = (start_of_group) - (first_of_community), \
.size = (end_of_group) - (start_of_group) + 1, \
.acpi_pad_base = (group_pad_base), \
}
/*
* A pad base of -1 indicates that this group uses contiguous numbering
* and a pad base should not be used for this group.
*/
#define PAD_BASE_NONE -1
/* The common/default group numbering is contiguous */
#define INTEL_GPP(first_of_community, start_of_group, end_of_group) \
INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
PAD_BASE_NONE)
/**
* struct reset_mapping - logical to actual value for PADRSTCFG in DW0
*
* Note that the values are expected to be within the field placement of the
* register itself. i.e. if the reset field is at 31:30 then the values within
* logical and chipset should occupy 31:30.
*/
struct reset_mapping {
u32 logical;
u32 chipset;
};
/**
* struct pad_group - describes the groups within each community
*
* @first_pad: offset of first pad of the group relative to the community
* @size: size of the group
* @acpi_pad_base: starting pin number for the pads in this group when they are
* used in ACPI. This is only needed if the pins are not contiguous across
* groups. Most groups will have this set to PAD_BASE_NONE and use
* contiguous numbering for ACPI.
*/
struct pad_group {
int first_pad;
uint size;
int acpi_pad_base;
};
/**
* struct pad_community - community of pads
*
* This describes a community, or each group within a community when multiple
* groups exist inside a community
*
* @name: Community name
* @num_gpi_regs: number of gpi registers in community
* @max_pads_per_group: number of pads in each group; number of pads bit-mapped
* in each GPI status/en and Host Own Reg
* @first_pad: first pad in community
* @last_pad: last pad in community
* @host_own_reg_0: offset to Host Ownership Reg 0
* @gpi_int_sts_reg_0: offset to GPI Int STS Reg 0
* @gpi_int_en_reg_0: offset to GPI Int Enable Reg 0
* @gpi_smi_sts_reg_0: offset to GPI SMI STS Reg 0
* @gpi_smi_en_reg_0: offset to GPI SMI EN Reg 0
* @pad_cfg_base: offset to first PAD_GFG_DW0 Reg
* @gpi_status_offset: specifies offset in struct gpi_status
* @port: PCR Port ID
* @reset_map: PADRSTCFG logical to chipset mapping
* @num_reset_vals: number of values in @reset_map
* @groups; list of groups for this community
* @num_groups: number of groups
*/
struct pad_community {
const char *name;
size_t num_gpi_regs;
size_t max_pads_per_group;
uint first_pad;
uint last_pad;
u16 host_own_reg_0;
u16 gpi_int_sts_reg_0;
u16 gpi_int_en_reg_0;
u16 gpi_smi_sts_reg_0;
u16 gpi_smi_en_reg_0;
u16 pad_cfg_base;
u8 gpi_status_offset;
u8 port;
const struct reset_mapping *reset_map;
size_t num_reset_vals;
const struct pad_group *groups;
size_t num_groups;
};
/**
* struct intel_pinctrl_priv - private data for each pinctrl device
*
* @comm: Pad community for this device
* @num_cfgs: Number of configuration words for each pad
* @itss: ITSS device (for interrupt handling)
* @itss_pol_cfg: Use to program Interrupt Polarity Control (IPCx) register
* Each bit represents IRQx Active High Polarity Disable configuration:
* when set to 1, the interrupt polarity associated with IRQx is inverted
* to appear as Active Low to IOAPIC and vice versa
*/
struct intel_pinctrl_priv {
const struct pad_community *comm;
int num_cfgs;
struct udevice *itss;
bool itss_pol_cfg;
};
/* Exported common operations for the pinctrl driver */
extern const struct pinctrl_ops intel_pinctrl_ops;
/* Exported common probe function for the pinctrl driver */
int intel_pinctrl_probe(struct udevice *dev);
/**
* intel_pinctrl_ofdata_to_platdata() - Handle common platdata setup
*
* @dev: Pinctrl device
* @comm: Pad community for this device
* @num_cfgs: Number of configuration words for each pad
* @return 0 if OK, -EDOM if @comm is NULL, other -ve value on other error
*/
int intel_pinctrl_ofdata_to_platdata(struct udevice *dev,
const struct pad_community *comm,
int num_cfgs);
/**
* pinctrl_route_gpe() - set GPIO groups for the general-purpose-event blocks
*
* The values from PMC register GPE_CFG are passed which is then mapped to
* proper groups for MISCCFG. This basically sets the MISCCFG register bits:
* dw0 = gpe0_route[11:8]. This is ACPI GPE0b.
* dw1 = gpe0_route[15:12]. This is ACPI GPE0c.
* dw2 = gpe0_route[19:16]. This is ACPI GPE0d.
*
* @dev: ITSS device
* @gpe0b: Value for GPE0B
* @gpe0c: Value for GPE0C
* @gpe0d: Value for GPE0D
* @return 0 if OK, -ve on error
*/
int pinctrl_route_gpe(struct udevice *dev, uint gpe0b, uint gpe0c, uint gpe0d);
/**
* pinctrl_config_pads() - Configure a list of pads
*
* Configures multiple pads using the provided data from the device tree.
*
* @dev: pinctrl device (any will do)
* @pads: Pad data, consisting of a pad number followed by num_cfgs entries
* containing the data for that pad (num_cfgs is set by the pinctrl device)
* @pads_count: Number of pads to configure
* @return 0 if OK, -ve on error
*/
int pinctrl_config_pads(struct udevice *dev, u32 *pads, int pads_count);
/**
* pinctrl_gpi_clear_int_cfg() - Set up the interrupts for use
*
* This enables the interrupt inputs and clears the status register bits
*
* @return 0 if OK, -ve on error
*/
int pinctrl_gpi_clear_int_cfg(void);
/**
* pinctrl_config_pads_for_node() - Configure pads
*
* Set up the pads using the data in a given node
*
* @dev: pinctrl device (any will do)
* @node: Node containing the 'pads' property with the data in it
* @return 0 if OK, -ve on error
*/
int pinctrl_config_pads_for_node(struct udevice *dev, ofnode node);
/**
* pinctrl_read_pads() - Read pad data from a node
*
* @dev: pinctrl device (any will do, it is just used to get config)
* @node: Node to read pad data from
* @prop: Property name to use (e.g. "pads")
* @padsp: Returns a pointer to an allocated array of pad data, in the format:
* <pad>
* <pad_config0>
* <pad_config1>
* ...
*
* The number of pad config values is set by the pinctrl controller.
* The caller must free this array.
* @pad_countp: Returns the number of pads read
* @ereturn 0 if OK, -ve on error
*/
int pinctrl_read_pads(struct udevice *dev, ofnode node, const char *prop,
u32 **padsp, int *pad_countp);
/**
* pinctrl_count_pads() - Count the number of pads in a pad array
*
* This used used with of-platdata where the array may be smaller than its
* maximum size. This function searches for the last pad in the array by finding
* the first 'zero' record
*
* This works out the number of records in the array. Each record has one word
* for the pad and num_cfgs words for the config.
*
* @dev: pinctrl device (any will do)
* @pads: Array of pad data
* @size: Size of pad data in bytes
* @return number of pads represented by the data
*/
int pinctrl_count_pads(struct udevice *dev, u32 *pads, int size);
/**
* intel_pinctrl_get_config_reg_offset() - Get offset of pin config registers
*
* This works out the register offset of a pin within the p2sb region.
*
* @dev: Pinctrl device
* @offset: GPIO offset within this device
* @return register offset of first register within the GPIO p2sb region
*/
u32 intel_pinctrl_get_config_reg_offset(struct udevice *dev, uint offset);
/**
* intel_pinctrl_get_config_reg_addr() - Get address of pin config registers
*
* This works out the absolute address of the registers for a pin
* @dev: Pinctrl device
* @offset: GPIO offset within this device
* @return register address of first register within the GPIO p2sb region
*/
u32 intel_pinctrl_get_config_reg_addr(struct udevice *dev, uint offset);
/**
* intel_pinctrl_get_config_reg() - Get the value of a GPIO register
*
* @dev: Pinctrl device
* @offset: GPIO offset within this device
* @return register value within the GPIO p2sb region
*/
u32 intel_pinctrl_get_config_reg(struct udevice *dev, uint offset);
/**
* intel_pinctrl_get_pad() - Get pad information for a pad
*
* This is used by the GPIO controller to find the pinctrl used by a pad.
*
* @pad: Pad to check
* @devp: Returns pinctrl device containing that pad
* @offsetp: Returns offset of pad within that pinctrl device
* @return 0 if OK, -ENOTBLK if pad number is invalid
*/
int intel_pinctrl_get_pad(uint pad, struct udevice **devp, uint *offsetp);
/**
* intel_pinctrl_get_acpi_pin() - Get the ACPI pin for a pinctrl pin
*
* Maps a pinctrl pin (in terms of its offset within the pins controlled by that
* pinctrl) to an ACPI GPIO pin-table entry.
*
* @dev: Pinctrl device to check
* @offset: Offset of pin within that device (0 = first)
* @return associated ACPI GPIO pin-table entry, or standard pin number if the
* ACPI pad base is not set
*/
int intel_pinctrl_get_acpi_pin(struct udevice *dev, uint offset);
#endif