u-boot/board/ti/common/board_detect.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

468 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Library to support early TI EVM EEPROM handling
*
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla
* Steve Kipisz
*/
#include <common.h>
#include <asm/omap_common.h>
#include <dm/uclass.h>
#include <i2c.h>
#include "board_detect.h"
#if defined(CONFIG_DM_I2C_COMPAT)
/**
* ti_i2c_set_alen - Set chip's i2c address length
* @bus_addr - I2C bus number
* @dev_addr - I2C eeprom id
* @alen - I2C address length in bytes
*
* DM_I2C by default sets the address length to be used to 1. This
* function allows this address length to be changed to match the
* eeprom used for board detection.
*/
int __maybe_unused ti_i2c_set_alen(int bus_addr, int dev_addr, int alen)
{
struct udevice *dev;
struct udevice *bus;
int rc;
rc = uclass_get_device_by_seq(UCLASS_I2C, bus_addr, &bus);
if (rc)
return rc;
rc = i2c_get_chip(bus, dev_addr, 1, &dev);
if (rc)
return rc;
rc = i2c_set_chip_offset_len(dev, alen);
if (rc)
return rc;
return 0;
}
#else
int __maybe_unused ti_i2c_set_alen(int bus_addr, int dev_addr, int alen)
{
return 0;
}
#endif
/**
* ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
* @i2c_bus: i2c bus number to initialize
* @dev_addr: Device address to probe for
*
* Return: 0 on success or corresponding error on failure.
*/
static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr)
{
int rc;
if (i2c_bus >= 0) {
rc = i2c_set_bus_num(i2c_bus);
if (rc)
return rc;
}
return i2c_probe(dev_addr);
}
/**
* ti_i2c_eeprom_read - Read data from an EEPROM
* @dev_addr: The device address of the EEPROM
* @offset: Offset to start reading in the EEPROM
* @ep: Pointer to a buffer to read into
* @epsize: Size of buffer
*
* Return: 0 on success or corresponding result of i2c_read
*/
static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
uchar *ep, int epsize)
{
int bus_num, rc, alen;
bus_num = i2c_get_bus_num();
alen = 2;
rc = ti_i2c_set_alen(bus_num, dev_addr, alen);
if (rc)
return rc;
return i2c_read(dev_addr, offset, alen, ep, epsize);
}
/**
* ti_eeprom_string_cleanup() - Handle eeprom programming errors
* @s: eeprom string (should be NULL terminated)
*
* Some Board manufacturers do not add a NULL termination at the
* end of string, instead some binary information is kludged in, hence
* convert the string to just printable characters of ASCII chart.
*/
static void __maybe_unused ti_eeprom_string_cleanup(char *s)
{
int i, l;
l = strlen(s);
for (i = 0; i < l; i++, s++)
if (*s < ' ' || *s > '~') {
*s = 0;
break;
}
}
__weak void gpi2c_init(void)
{
}
static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
u32 header, u32 size, uint8_t *ep)
{
u32 byte, hdr_read;
int rc;
gpi2c_init();
rc = ti_i2c_eeprom_init(bus_addr, dev_addr);
if (rc)
return rc;
/*
* Read the header first then only read the other contents.
*/
byte = 2;
rc = ti_i2c_set_alen(bus_addr, dev_addr, byte);
if (rc)
return rc;
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
if (rc)
return rc;
/* Corrupted data??? */
if (hdr_read != header) {
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
/*
* read the eeprom header using i2c again, but use only a
* 1 byte address (some legacy boards need this..)
*/
byte = 1;
if (rc) {
rc = ti_i2c_set_alen(bus_addr, dev_addr, byte);
if (rc)
return rc;
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
4);
}
if (rc)
return rc;
}
if (hdr_read != header)
return -1;
rc = i2c_read(dev_addr, 0x0, byte, ep, size);
if (rc)
return rc;
return 0;
}
int __maybe_unused ti_i2c_eeprom_am_set(const char *name, const char *rev)
{
struct ti_common_eeprom *ep;
if (!name || !rev)
return -1;
ep = TI_EEPROM_DATA;
if (ep->header == TI_EEPROM_HEADER_MAGIC)
goto already_set;
/* Set to 0 all fields */
memset(ep, 0, sizeof(*ep));
strncpy(ep->name, name, TI_EEPROM_HDR_NAME_LEN);
strncpy(ep->version, rev, TI_EEPROM_HDR_REV_LEN);
/* Some dummy serial number to identify the platform */
strncpy(ep->serial, "0000", TI_EEPROM_HDR_SERIAL_LEN);
/* Mark it with a valid header */
ep->header = TI_EEPROM_HEADER_MAGIC;
already_set:
return 0;
}
int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr)
{
int rc;
struct ti_am_eeprom am_ep;
struct ti_common_eeprom *ep;
ep = TI_EEPROM_DATA;
#ifndef CONFIG_SPL_BUILD
if (ep->header == TI_EEPROM_HEADER_MAGIC)
return 0; /* EEPROM has already been read */
#endif
/* Initialize with a known bad marker for i2c fails.. */
ep->header = TI_DEAD_EEPROM_MAGIC;
ep->name[0] = 0x0;
ep->version[0] = 0x0;
ep->serial[0] = 0x0;
ep->config[0] = 0x0;
rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
sizeof(am_ep), (uint8_t *)&am_ep);
if (rc)
return rc;
ep->header = am_ep.header;
strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
ti_eeprom_string_cleanup(ep->name);
/* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 &&
am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00)
strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1);
else
strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1);
ti_eeprom_string_cleanup(ep->version);
strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
ti_eeprom_string_cleanup(ep->serial);
strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
ti_eeprom_string_cleanup(ep->config);
memcpy(ep->mac_addr, am_ep.mac_addr,
TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN);
return 0;
}
int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr)
{
int rc, offset = 0;
struct dra7_eeprom dra7_ep;
struct ti_common_eeprom *ep;
ep = TI_EEPROM_DATA;
#ifndef CONFIG_SPL_BUILD
if (ep->header == DRA7_EEPROM_HEADER_MAGIC)
return 0; /* EEPROM has already been read */
#endif
/* Initialize with a known bad marker for i2c fails.. */
ep->header = TI_DEAD_EEPROM_MAGIC;
ep->name[0] = 0x0;
ep->version[0] = 0x0;
ep->serial[0] = 0x0;
ep->config[0] = 0x0;
ep->emif1_size = 0;
ep->emif2_size = 0;
rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC,
sizeof(dra7_ep), (uint8_t *)&dra7_ep);
if (rc)
return rc;
ep->header = dra7_ep.header;
strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
ti_eeprom_string_cleanup(ep->name);
offset = dra7_ep.version_major - 1;
/* Rev F is skipped */
if (offset >= 5)
offset = offset + 1;
snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d",
'A' + offset, dra7_ep.version_minor);
ti_eeprom_string_cleanup(ep->version);
ep->emif1_size = (u64)dra7_ep.emif1_size;
ep->emif2_size = (u64)dra7_ep.emif2_size;
strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
ti_eeprom_string_cleanup(ep->config);
return 0;
}
bool __maybe_unused board_ti_is(char *name_tag)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
return false;
return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN);
}
bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
int l;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
return false;
l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len;
return !strncmp(ep->version, rev_tag, l);
}
char * __maybe_unused board_ti_get_rev(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
return ep->version;
}
char * __maybe_unused board_ti_get_config(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
return ep->config;
}
char * __maybe_unused board_ti_get_name(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
return ep->name;
}
void __maybe_unused
board_ti_get_eth_mac_addr(int index,
u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
goto fail;
if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR)
goto fail;
memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
return;
fail:
memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
}
u64 __maybe_unused board_ti_get_emif1_size(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
return 0;
return ep->emif1_size;
}
u64 __maybe_unused board_ti_get_emif2_size(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
return 0;
return ep->emif2_size;
}
void __maybe_unused set_board_info_env(char *name)
{
char *unknown = "unknown";
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (name)
env_set("board_name", name);
else if (ep->name)
env_set("board_name", ep->name);
else
env_set("board_name", unknown);
if (ep->version)
env_set("board_rev", ep->version);
else
env_set("board_rev", unknown);
if (ep->serial)
env_set("board_serial", ep->serial);
else
env_set("board_serial", unknown);
}
static u64 mac_to_u64(u8 mac[6])
{
int i;
u64 addr = 0;
for (i = 0; i < 6; i++) {
addr <<= 8;
addr |= mac[i];
}
return addr;
}
static void u64_to_mac(u64 addr, u8 mac[6])
{
mac[5] = addr;
mac[4] = addr >> 8;
mac[3] = addr >> 16;
mac[2] = addr >> 24;
mac[1] = addr >> 32;
mac[0] = addr >> 40;
}
void board_ti_set_ethaddr(int index)
{
uint8_t mac_addr[6];
int i;
u64 mac1, mac2;
u8 mac_addr1[6], mac_addr2[6];
int num_macs;
/*
* Export any Ethernet MAC addresses from EEPROM.
* The 2 MAC addresses in EEPROM define the address range.
*/
board_ti_get_eth_mac_addr(0, mac_addr1);
board_ti_get_eth_mac_addr(1, mac_addr2);
if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) {
mac1 = mac_to_u64(mac_addr1);
mac2 = mac_to_u64(mac_addr2);
/* must contain an address range */
num_macs = mac2 - mac1 + 1;
if (num_macs <= 0)
return;
if (num_macs > 50) {
printf("%s: Too many MAC addresses: %d. Limiting to 50\n",
__func__, num_macs);
num_macs = 50;
}
for (i = 0; i < num_macs; i++) {
u64_to_mac(mac1 + i, mac_addr);
if (is_valid_ethaddr(mac_addr)) {
eth_env_set_enetaddr_by_index("eth", i + index,
mac_addr);
}
}
}
}
bool __maybe_unused board_ti_was_eeprom_read(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header == TI_EEPROM_HEADER_MAGIC)
return true;
else
return false;
}