mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 19:28:36 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
117 lines
2.2 KiB
ArmAsm
117 lines
2.2 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2008
|
|
* Mark Jonas <mark.jonas@de.bosch.com>
|
|
*
|
|
* (C) Copyright 2007
|
|
* Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
|
|
*
|
|
* board/mpr2/lowlevel_init.S
|
|
*/
|
|
#include <asm/macro.h>
|
|
|
|
.global lowlevel_init
|
|
|
|
.text
|
|
.align 2
|
|
|
|
lowlevel_init:
|
|
|
|
/*
|
|
* Set frequency multipliers and dividers in FRQCR.
|
|
*/
|
|
write16 WTCSR_A, WTCSR_D
|
|
|
|
write16 WTCNT_A, WTCNT_D
|
|
|
|
write16 FRQCR_A, FRQCR_D
|
|
|
|
/*
|
|
* Setup CS0 (Flash).
|
|
*/
|
|
write32 CS0BCR_A, CS0BCR_D
|
|
|
|
write32 CS0WCR_A, CS0WCR_D
|
|
|
|
/*
|
|
* Setup CS3 (SDRAM).
|
|
*/
|
|
write32 CS3BCR_A, CS3BCR_D
|
|
|
|
write32 CS3WCR_A, CS3WCR_D
|
|
|
|
write32 SDCR_A, SDCR_D1
|
|
|
|
write32 RTCSR_A, RTCSR_D
|
|
|
|
write32 RTCNT_A, RTCNT_D
|
|
|
|
write32 RTCOR_A, RTCOR_D
|
|
|
|
write32 SDCR_A, SDCR_D2
|
|
|
|
mov.l SDMR3_A, r1
|
|
mov.l SDMR3_D, r0
|
|
add r0, r1
|
|
mov #0, r0
|
|
mov.w r0, @r1
|
|
|
|
rts
|
|
nop
|
|
|
|
.align 4
|
|
|
|
/*
|
|
* Configuration for MPR2 A.3 through A.7
|
|
*/
|
|
|
|
/*
|
|
* PLL Settings
|
|
*/
|
|
FRQCR_D: .word 0x1103 /* I:B:P=8:4:2 */
|
|
WTCNT_D: .word 0x5A00 /* start counting at zero */
|
|
WTCSR_D: .word 0xA507 /* divide by 4096 */
|
|
.align 2
|
|
/*
|
|
* Spansion S29GL256N11 @ 48 MHz
|
|
*/
|
|
/* 1 idle cycle inserted, normal space, 16 bit */
|
|
CS0BCR_D: .long 0x12490400
|
|
/* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */
|
|
CS0WCR_D: .long 0x00000340
|
|
|
|
/*
|
|
* Samsung K4S511632B-UL75 @ 48 MHz
|
|
* Micron MT48LC32M16A2-75 @ 48 MHz
|
|
*/
|
|
/* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */
|
|
CS3BCR_D: .long 0x10004400
|
|
/* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */
|
|
CS3WCR_D: .long 0x00000091
|
|
/* no refresh, 13 rows, 10 cols, NO bank active mode */
|
|
SDCR_D1: .long 0x00000012
|
|
SDCR_D2: .long 0x00000812 /* refresh */
|
|
RTCSR_D: .long 0xA55A0008 /* 1/4, once */
|
|
RTCNT_D: .long 0xA55A005D /* count 93 */
|
|
RTCOR_D: .long 0xa55a005d /* count 93 */
|
|
/* mode register CL2, burst read and SINGLE WRITE */
|
|
SDMR3_D: .long 0x440
|
|
|
|
/*
|
|
* Registers
|
|
*/
|
|
|
|
FRQCR_A: .long 0xA415FF80
|
|
WTCNT_A: .long 0xA415FF84
|
|
WTCSR_A: .long 0xA415FF86
|
|
|
|
#define BSC_BASE 0xA4FD0000
|
|
CS0BCR_A: .long BSC_BASE + 0x04
|
|
CS3BCR_A: .long BSC_BASE + 0x0C
|
|
CS0WCR_A: .long BSC_BASE + 0x24
|
|
CS3WCR_A: .long BSC_BASE + 0x2C
|
|
SDCR_A: .long BSC_BASE + 0x44
|
|
RTCSR_A: .long BSC_BASE + 0x48
|
|
RTCNT_A: .long BSC_BASE + 0x4C
|
|
RTCOR_A: .long BSC_BASE + 0x50
|
|
SDMR3_A: .long BSC_BASE + 0x5000
|