u-boot/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
Rajesh Bhagat 23a12cb3d0 board: common: vid: Add support for LTC3882 voltage regulator chip
Restructures common driver to support LTC3882 voltage regulator
chip.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:19:56 -08:00

430 lines
16 KiB
C

/*
* LayerScape Internal Memory Map
*
* Copyright (C) 2017 NXP Semiconductors
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ARCH_FSL_LSCH3_IMMAP_H_
#define __ARCH_FSL_LSCH3_IMMAP_H_
#define CONFIG_SYS_IMMR 0x01000000
#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
#define CONFIG_SYS_FSL_DDR2_ADDR (CONFIG_SYS_IMMR + 0x00090000)
#define CONFIG_SYS_FSL_DDR3_ADDR 0x08210000
#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00E00000)
#define CONFIG_SYS_FSL_PMU_ADDR (CONFIG_SYS_IMMR + 0x00E30000)
#define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00E60000)
#define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR (CONFIG_SYS_IMMR + 0x00300000)
#define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR (CONFIG_SYS_IMMR + 0x00310000)
#define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR (CONFIG_SYS_IMMR + 0x00370000)
#define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x010c0000)
#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x01140000)
#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x01240000)
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011C0500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011C0600)
#define SYS_FSL_LS2080A_LS2085A_TIMER_ADDR 0x023d0000
#define CONFIG_SYS_FSL_TIMER_ADDR 0x023e0000
#define CONFIG_SYS_FSL_PMU_CLTBENR (CONFIG_SYS_FSL_PMU_ADDR + \
0x18A0)
#define FSL_PMU_PCTBENR_OFFSET (CONFIG_SYS_FSL_PMU_ADDR + 0x8A0)
#define FSL_LSCH3_SVR (CONFIG_SYS_FSL_GUTS_ADDR + 0xA4)
#define CONFIG_SYS_FSL_WRIOP1_ADDR (CONFIG_SYS_IMMR + 0x7B80000)
#define CONFIG_SYS_FSL_WRIOP1_MDIO1 (CONFIG_SYS_FSL_WRIOP1_ADDR + 0x16000)
#define CONFIG_SYS_FSL_WRIOP1_MDIO2 (CONFIG_SYS_FSL_WRIOP1_ADDR + 0x17000)
#define CONFIG_SYS_FSL_LSCH3_SERDES_ADDR (CONFIG_SYS_IMMR + 0xEA0000)
#define CONFIG_SYS_FSL_DCSR_DDR_ADDR 0x70012c000ULL
#define CONFIG_SYS_FSL_DCSR_DDR2_ADDR 0x70012d000ULL
#define CONFIG_SYS_FSL_DCSR_DDR3_ADDR 0x700132000ULL
#define CONFIG_SYS_FSL_DCSR_DDR4_ADDR 0x700133000ULL
#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01000000)
#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01010000)
#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x01020000)
#define I2C4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01030000)
#define GPIO4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01330000)
#define GPIO4_GPDIR_ADDR (GPIO4_BASE_ADDR + 0x0)
#define GPIO4_GPDAT_ADDR (GPIO4_BASE_ADDR + 0x8)
#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000)
#define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02110000)
/* TZ Address Space Controller Definitions */
#define TZASC1_BASE 0x01100000 /* as per CCSR map. */
#define TZASC2_BASE 0x01110000 /* as per CCSR map. */
#define TZASC3_BASE 0x01120000 /* as per CCSR map. */
#define TZASC4_BASE 0x01130000 /* as per CCSR map. */
#define TZASC_BUILD_CONFIG_REG(x) ((TZASC1_BASE + (x * 0x10000)))
#define TZASC_ACTION_REG(x) ((TZASC1_BASE + (x * 0x10000)) + 0x004)
#define TZASC_GATE_KEEPER(x) ((TZASC1_BASE + (x * 0x10000)) + 0x008)
#define TZASC_REGION_BASE_LOW_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x100)
#define TZASC_REGION_BASE_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x104)
#define TZASC_REGION_TOP_LOW_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x108)
#define TZASC_REGION_TOP_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x10C)
#define TZASC_REGION_ATTRIBUTES_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x110)
#define TZASC_REGION_ID_ACCESS_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x114)
/* SATA */
#define AHCI_BASE_ADDR1 (CONFIG_SYS_IMMR + 0x02200000)
#define AHCI_BASE_ADDR2 (CONFIG_SYS_IMMR + 0x02210000)
/* SFP */
#define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0x00e80200)
/* SEC */
#define CONFIG_SYS_FSL_SEC_OFFSET 0x07000000ull
#define CONFIG_SYS_FSL_JR0_OFFSET 0x07010000ull
#define CONFIG_SYS_FSL_SEC_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
#define CONFIG_SYS_FSL_JR0_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
/* Security Monitor */
#define CONFIG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0x00e90000)
/* MMU 500 */
#define SMMU_SCR0 (SMMU_BASE + 0x0)
#define SMMU_SCR1 (SMMU_BASE + 0x4)
#define SMMU_SCR2 (SMMU_BASE + 0x8)
#define SMMU_SACR (SMMU_BASE + 0x10)
#define SMMU_IDR0 (SMMU_BASE + 0x20)
#define SMMU_IDR1 (SMMU_BASE + 0x24)
#define SMMU_NSCR0 (SMMU_BASE + 0x400)
#define SMMU_NSCR2 (SMMU_BASE + 0x408)
#define SMMU_NSACR (SMMU_BASE + 0x410)
#define SCR0_CLIENTPD_MASK 0x00000001
#define SCR0_USFCFG_MASK 0x00000400
/* PCIe */
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000)
#define CONFIG_SYS_PCIE4_ADDR (CONFIG_SYS_IMMR + 0x2700000)
#ifdef CONFIG_ARCH_LS1088A
#define CONFIG_SYS_PCIE1_PHYS_ADDR 0x2000000000ULL
#define CONFIG_SYS_PCIE2_PHYS_ADDR 0x2800000000ULL
#define CONFIG_SYS_PCIE3_PHYS_ADDR 0x3000000000ULL
#else
#define CONFIG_SYS_PCIE1_PHYS_ADDR 0x1000000000ULL
#define CONFIG_SYS_PCIE2_PHYS_ADDR 0x1200000000ULL
#define CONFIG_SYS_PCIE3_PHYS_ADDR 0x1400000000ULL
#define CONFIG_SYS_PCIE4_PHYS_ADDR 0x1600000000ULL
#endif
/* Device Configuration */
#define DCFG_BASE 0x01e00000
#define DCFG_PORSR1 0x000
#define DCFG_PORSR1_RCW_SRC 0xff800000
#define DCFG_PORSR1_RCW_SRC_NOR 0x12f00000
#define DCFG_RCWSR13 0x130
#define DCFG_RCWSR13_DSPI (0 << 8)
#define DCFG_RCWSR15 0x138
#define DCFG_RCWSR15_IFCGRPABASE_QSPI 0x3
#define DCFG_DCSR_BASE 0X700100000ULL
#define DCFG_DCSR_PORCR1 0x000
/* Interrupt Sampling Control */
#define ISC_BASE 0x01F70000
#define IRQCR_OFFSET 0x14
/* Supplemental Configuration */
#define SCFG_BASE 0x01fc0000
#define SCFG_USB3PRM1CR 0x000
#define SCFG_USB3PRM1CR_INIT 0x27672b2a
#define SCFG_USB_TXVREFTUNE 0x9
#define SCFG_USB_SQRXTUNE_MASK 0x7
#define SCFG_QSPICLKCTLR 0x10
#define DCSR_BASE 0x700000000ULL
#define DCSR_USB_PHY1 0x4600000
#define DCSR_USB_PHY2 0x4610000
#define DCSR_USB_PHY_RX_OVRD_IN_HI 0x200C
#define USB_PHY_RX_EQ_VAL_1 0x0000
#define USB_PHY_RX_EQ_VAL_2 0x0080
#define USB_PHY_RX_EQ_VAL_3 0x0380
#define USB_PHY_RX_EQ_VAL_4 0x0b80
#define TP_ITYP_AV 0x00000001 /* Initiator available */
#define TP_ITYP_TYPE(x) (((x) & 0x6) >> 1) /* Initiator Type */
#define TP_ITYP_TYPE_ARM 0x0
#define TP_ITYP_TYPE_PPC 0x1 /* PowerPC */
#define TP_ITYP_TYPE_OTHER 0x2 /* StarCore DSP */
#define TP_ITYP_TYPE_HA 0x3 /* HW Accelerator */
#define TP_ITYP_THDS(x) (((x) & 0x18) >> 3) /* # threads */
#define TP_ITYP_VER(x) (((x) & 0xe0) >> 5) /* Initiator Version */
#define TY_ITYP_VER_A7 0x1
#define TY_ITYP_VER_A53 0x2
#define TY_ITYP_VER_A57 0x3
#define TY_ITYP_VER_A72 0x4
#define TP_CLUSTER_EOC 0x80000000 /* end of clusters */
#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
#define TP_INIT_PER_CLUSTER 4
/* This is chassis generation 3 */
#ifndef __ASSEMBLY__
struct sys_info {
unsigned long freq_processor[CONFIG_MAX_CPUS];
/* frequency of platform PLL */
unsigned long freq_systembus;
unsigned long freq_ddrbus;
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
unsigned long freq_ddrbus2;
#endif
unsigned long freq_localbus;
unsigned long freq_qe;
#ifdef CONFIG_SYS_DPAA_FMAN
unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
unsigned long freq_qman;
#endif
#ifdef CONFIG_SYS_DPAA_PME
unsigned long freq_pme;
#endif
};
/* Global Utilities Block */
struct ccsr_gur {
u32 porsr1; /* POR status 1 */
u32 porsr2; /* POR status 2 */
u8 res_008[0x20-0x8];
u32 gpporcr1; /* General-purpose POR configuration */
u32 gpporcr2; /* General-purpose POR configuration 2 */
u32 gpporcr3;
u32 gpporcr4;
u8 res_030[0x60-0x30];
#define FSL_CHASSIS3_DCFG_FUSESR_VID_MASK 0x1F
#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK 0x1F
#if defined(CONFIG_ARCH_LS1088A)
#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 25
#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 20
#else
#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 2
#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 7
#endif
u32 dcfg_fusesr; /* Fuse status register */
u8 res_064[0x70-0x64];
u32 devdisr; /* Device disable control 1 */
u32 devdisr2; /* Device disable control 2 */
u32 devdisr3; /* Device disable control 3 */
u32 devdisr4; /* Device disable control 4 */
u32 devdisr5; /* Device disable control 5 */
u32 devdisr6; /* Device disable control 6 */
u8 res_088[0x94-0x88];
u32 coredisr; /* Device disable control 7 */
#define FSL_CHASSIS3_DEVDISR2_DPMAC1 0x00000001
#define FSL_CHASSIS3_DEVDISR2_DPMAC2 0x00000002
#define FSL_CHASSIS3_DEVDISR2_DPMAC3 0x00000004
#define FSL_CHASSIS3_DEVDISR2_DPMAC4 0x00000008
#define FSL_CHASSIS3_DEVDISR2_DPMAC5 0x00000010
#define FSL_CHASSIS3_DEVDISR2_DPMAC6 0x00000020
#define FSL_CHASSIS3_DEVDISR2_DPMAC7 0x00000040
#define FSL_CHASSIS3_DEVDISR2_DPMAC8 0x00000080
#define FSL_CHASSIS3_DEVDISR2_DPMAC9 0x00000100
#define FSL_CHASSIS3_DEVDISR2_DPMAC10 0x00000200
#define FSL_CHASSIS3_DEVDISR2_DPMAC11 0x00000400
#define FSL_CHASSIS3_DEVDISR2_DPMAC12 0x00000800
#define FSL_CHASSIS3_DEVDISR2_DPMAC13 0x00001000
#define FSL_CHASSIS3_DEVDISR2_DPMAC14 0x00002000
#define FSL_CHASSIS3_DEVDISR2_DPMAC15 0x00004000
#define FSL_CHASSIS3_DEVDISR2_DPMAC16 0x00008000
#define FSL_CHASSIS3_DEVDISR2_DPMAC17 0x00010000
#define FSL_CHASSIS3_DEVDISR2_DPMAC18 0x00020000
#define FSL_CHASSIS3_DEVDISR2_DPMAC19 0x00040000
#define FSL_CHASSIS3_DEVDISR2_DPMAC20 0x00080000
#define FSL_CHASSIS3_DEVDISR2_DPMAC21 0x00100000
#define FSL_CHASSIS3_DEVDISR2_DPMAC22 0x00200000
#define FSL_CHASSIS3_DEVDISR2_DPMAC23 0x00400000
#define FSL_CHASSIS3_DEVDISR2_DPMAC24 0x00800000
u8 res_098[0xa0-0x98];
u32 pvr; /* Processor version */
u32 svr; /* System version */
u8 res_0a8[0x100-0xa8];
u32 rcwsr[30]; /* Reset control word status */
#define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT 2
#define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK 0x1f
#define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT 10
#define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK 0x3f
#define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT 18
#define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK 0x3f
#if defined(CONFIG_ARCH_LS2080A)
#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK 0x00FF0000
#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT 16
#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK 0xFF000000
#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT 24
#define FSL_CHASSIS3_SRDS1_PRTCL_MASK FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK
#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT
#define FSL_CHASSIS3_SRDS2_PRTCL_MASK FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK
#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
#define FSL_CHASSIS3_SRDS1_REGSR 29
#define FSL_CHASSIS3_SRDS2_REGSR 29
#elif defined(CONFIG_ARCH_LS1088A)
#define FSL_CHASSIS3_EC1_REGSR 26
#define FSL_CHASSIS3_EC2_REGSR 26
#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_MASK 0x00000007
#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_SHIFT 0
#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_MASK 0x00000038
#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_SHIFT 3
#define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK 0xFFFF0000
#define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT 16
#define FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK 0x0000FFFF
#define FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT 0
#define FSL_CHASSIS3_SRDS1_PRTCL_MASK FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK
#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT
#define FSL_CHASSIS3_SRDS2_PRTCL_MASK FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK
#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT
#define FSL_CHASSIS3_SRDS1_REGSR 29
#define FSL_CHASSIS3_SRDS2_REGSR 30
#endif
#define RCW_SB_EN_REG_INDEX 9
#define RCW_SB_EN_MASK 0x00000400
u8 res_178[0x200-0x178];
u32 scratchrw[16]; /* Scratch Read/Write */
u8 res_240[0x300-0x240];
u32 scratchw1r[4]; /* Scratch Read (Write once) */
u8 res_310[0x400-0x310];
u32 bootlocptrl; /* Boot location pointer low-order addr */
u32 bootlocptrh; /* Boot location pointer high-order addr */
u8 res_408[0x520-0x408];
u32 usb1_amqr;
u32 usb2_amqr;
u8 res_528[0x530-0x528]; /* add more registers when needed */
u32 sdmm1_amqr;
u8 res_534[0x550-0x534]; /* add more registers when needed */
u32 sata1_amqr;
u32 sata2_amqr;
u8 res_558[0x570-0x558]; /* add more registers when needed */
u32 misc1_amqr;
u8 res_574[0x590-0x574]; /* add more registers when needed */
u32 spare1_amqr;
u32 spare2_amqr;
u8 res_598[0x620-0x598]; /* add more registers when needed */
u32 gencr[7]; /* General Control Registers */
u8 res_63c[0x640-0x63c]; /* add more registers when needed */
u32 cgensr1; /* Core General Status Register */
u8 res_644[0x660-0x644]; /* add more registers when needed */
u32 cgencr1; /* Core General Control Register */
u8 res_664[0x740-0x664]; /* add more registers when needed */
u32 tp_ityp[64]; /* Topology Initiator Type Register */
struct {
u32 upper;
u32 lower;
} tp_cluster[4]; /* Core cluster n Topology Register */
u8 res_864[0x920-0x864]; /* add more registers when needed */
u32 ioqoscr[8]; /*I/O Quality of Services Register */
u32 uccr;
u8 res_944[0x960-0x944]; /* add more registers when needed */
u32 ftmcr;
u8 res_964[0x990-0x964]; /* add more registers when needed */
u32 coredisablesr;
u8 res_994[0xa00-0x994]; /* add more registers when needed */
u32 sdbgcr; /*Secure Debug Confifuration Register */
u8 res_a04[0xbf8-0xa04]; /* add more registers when needed */
u32 ipbrr1;
u32 ipbrr2;
u8 res_858[0x1000-0xc00];
};
struct ccsr_clk_cluster_group {
struct {
u8 res_00[0x10];
u32 csr;
u8 res_14[0x20-0x14];
} hwncsr[3];
u8 res_60[0x80-0x60];
struct {
u32 gsr;
u8 res_84[0xa0-0x84];
} pllngsr[3];
u8 res_e0[0x100-0xe0];
};
struct ccsr_clk_ctrl {
struct {
u32 csr; /* core cluster n clock control status */
u8 res_04[0x20-0x04];
} clkcncsr[8];
};
struct ccsr_reset {
u32 rstcr; /* 0x000 */
u32 rstcrsp; /* 0x004 */
u8 res_008[0x10-0x08]; /* 0x008 */
u32 rstrqmr1; /* 0x010 */
u32 rstrqmr2; /* 0x014 */
u32 rstrqsr1; /* 0x018 */
u32 rstrqsr2; /* 0x01c */
u32 rstrqwdtmrl; /* 0x020 */
u32 rstrqwdtmru; /* 0x024 */
u8 res_028[0x30-0x28]; /* 0x028 */
u32 rstrqwdtsrl; /* 0x030 */
u32 rstrqwdtsru; /* 0x034 */
u8 res_038[0x60-0x38]; /* 0x038 */
u32 brrl; /* 0x060 */
u32 brru; /* 0x064 */
u8 res_068[0x80-0x68]; /* 0x068 */
u32 pirset; /* 0x080 */
u32 pirclr; /* 0x084 */
u8 res_088[0x90-0x88]; /* 0x088 */
u32 brcorenbr; /* 0x090 */
u8 res_094[0x100-0x94]; /* 0x094 */
u32 rcw_reqr; /* 0x100 */
u32 rcw_completion; /* 0x104 */
u8 res_108[0x110-0x108]; /* 0x108 */
u32 pbi_reqr; /* 0x110 */
u32 pbi_completion; /* 0x114 */
u8 res_118[0xa00-0x118]; /* 0x118 */
u32 qmbm_warmrst; /* 0xa00 */
u32 soc_warmrst; /* 0xa04 */
u8 res_a08[0xbf8-0xa08]; /* 0xa08 */
u32 ip_rev1; /* 0xbf8 */
u32 ip_rev2; /* 0xbfc */
};
struct ccsr_serdes {
struct {
u32 rstctl; /* Reset Control Register */
u32 pllcr0; /* PLL Control Register 0 */
u32 pllcr1; /* PLL Control Register 1 */
u32 pllcr2; /* PLL Control Register 2 */
u32 pllcr3; /* PLL Control Register 3 */
u32 pllcr4; /* PLL Control Register 4 */
u32 pllcr5; /* PLL Control Register 5 */
u8 res[0x20 - 0x1c];
} bank[2];
u8 res1[0x90 - 0x40];
u32 srdstcalcr; /* TX Calibration Control */
u32 srdstcalcr1; /* TX Calibration Control1 */
u8 res2[0xa0 - 0x98];
u32 srdsrcalcr; /* RX Calibration Control */
u32 srdsrcalcr1; /* RX Calibration Control1 */
u8 res3[0xb0 - 0xa8];
u32 srdsgr0; /* General Register 0 */
u8 res4[0x800 - 0xb4];
struct serdes_lane {
u32 gcr0; /* General Control Register 0 */
u32 gcr1; /* General Control Register 1 */
u32 gcr2; /* General Control Register 2 */
u32 ssc0; /* Speed Switch Control 0 */
u32 rec0; /* Receive Equalization Control 0 */
u32 rec1; /* Receive Equalization Control 1 */
u32 tec0; /* Transmit Equalization Control 0 */
u32 ssc1; /* Speed Switch Control 1 */
u8 res1[0x840 - 0x820];
} lane[8];
u8 res5[0x19fc - 0xa00];
};
#endif /*__ASSEMBLY__*/
#endif /* __ARCH_FSL_LSCH3_IMMAP_H_ */