u-boot/common/miiphyutil.c
Michal Simek 79e2a6a04a common: miiphyutil: Add helper function for mdio bus name
The most of ethernet drivers are using this mdio registration sequence.
strcpy(priv->bus->name, "emac");
mdio_register(priv->bus);
Where driver can be used only with one MDIO bus because only unique
name should be used.

Other drivers are using unique device name for MDIO registration to
support multiple instances.
snprintf(priv->bus->name, sizeof(bus->name), "%s", name);

With DM dev->seq is used more even in logs
(like random MAC address generation:
printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
       dev->name, dev->seq, pdata->enetaddr);
)
where eth%d prefix is used.

Simplify driver code to register mdio device with dev->seq number
to simplify mdio registration and reduce code duplication across
all drivers. With DM_SEQ_ALIAS enabled dev->seq reflects alias setting.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-20 07:40:04 +01:00

555 lines
12 KiB
C

/*
* (C) Copyright 2001
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* This provides a bit-banged interface to the ethernet MII management
* channel.
*/
#include <common.h>
#include <dm.h>
#include <miiphy.h>
#include <phy.h>
#include <asm/types.h>
#include <linux/list.h>
#include <malloc.h>
#include <net.h>
/* local debug macro */
#undef MII_DEBUG
#undef debug
#ifdef MII_DEBUG
#define debug(fmt, args...) printf(fmt, ##args)
#else
#define debug(fmt, args...)
#endif /* MII_DEBUG */
static struct list_head mii_devs;
static struct mii_dev *current_mii;
/*
* Lookup the mii_dev struct by the registered device name.
*/
struct mii_dev *miiphy_get_dev_by_name(const char *devname)
{
struct list_head *entry;
struct mii_dev *dev;
if (!devname) {
printf("NULL device name!\n");
return NULL;
}
list_for_each(entry, &mii_devs) {
dev = list_entry(entry, struct mii_dev, link);
if (strcmp(dev->name, devname) == 0)
return dev;
}
return NULL;
}
/*****************************************************************************
*
* Initialize global data. Need to be called before any other miiphy routine.
*/
void miiphy_init(void)
{
INIT_LIST_HEAD(&mii_devs);
current_mii = NULL;
}
struct mii_dev *mdio_alloc(void)
{
struct mii_dev *bus;
bus = malloc(sizeof(*bus));
if (!bus)
return bus;
memset(bus, 0, sizeof(*bus));
/* initalize mii_dev struct fields */
INIT_LIST_HEAD(&bus->link);
return bus;
}
void mdio_free(struct mii_dev *bus)
{
free(bus);
}
int mdio_register(struct mii_dev *bus)
{
if (!bus || !bus->read || !bus->write)
return -1;
/* check if we have unique name */
if (miiphy_get_dev_by_name(bus->name)) {
printf("mdio_register: non unique device name '%s'\n",
bus->name);
return -1;
}
/* add it to the list */
list_add_tail(&bus->link, &mii_devs);
if (!current_mii)
current_mii = bus;
return 0;
}
int mdio_register_seq(struct mii_dev *bus, int seq)
{
int ret;
/* Setup a unique name for each mdio bus */
ret = snprintf(bus->name, MDIO_NAME_LEN, "eth%d", seq);
if (ret < 0)
return ret;
return mdio_register(bus);
}
int mdio_unregister(struct mii_dev *bus)
{
if (!bus)
return 0;
/* delete it from the list */
list_del(&bus->link);
if (current_mii == bus)
current_mii = NULL;
return 0;
}
void mdio_list_devices(void)
{
struct list_head *entry;
list_for_each(entry, &mii_devs) {
int i;
struct mii_dev *bus = list_entry(entry, struct mii_dev, link);
printf("%s:\n", bus->name);
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *phydev = bus->phymap[i];
if (phydev) {
printf("%x - %s", i, phydev->drv->name);
if (phydev->dev)
printf(" <--> %s\n", phydev->dev->name);
else
printf("\n");
}
}
}
}
int miiphy_set_current_dev(const char *devname)
{
struct mii_dev *dev;
dev = miiphy_get_dev_by_name(devname);
if (dev) {
current_mii = dev;
return 0;
}
printf("No such device: %s\n", devname);
return 1;
}
struct mii_dev *mdio_get_current_dev(void)
{
return current_mii;
}
struct phy_device *mdio_phydev_for_ethname(const char *ethname)
{
struct list_head *entry;
struct mii_dev *bus;
list_for_each(entry, &mii_devs) {
int i;
bus = list_entry(entry, struct mii_dev, link);
for (i = 0; i < PHY_MAX_ADDR; i++) {
if (!bus->phymap[i] || !bus->phymap[i]->dev)
continue;
if (strcmp(bus->phymap[i]->dev->name, ethname) == 0)
return bus->phymap[i];
}
}
printf("%s is not a known ethernet\n", ethname);
return NULL;
}
const char *miiphy_get_current_dev(void)
{
if (current_mii)
return current_mii->name;
return NULL;
}
static struct mii_dev *miiphy_get_active_dev(const char *devname)
{
/* If the current mii is the one we want, return it */
if (current_mii)
if (strcmp(current_mii->name, devname) == 0)
return current_mii;
/* Otherwise, set the active one to the one we want */
if (miiphy_set_current_dev(devname))
return NULL;
else
return current_mii;
}
/*****************************************************************************
*
* Read to variable <value> from the PHY attached to device <devname>,
* use PHY address <addr> and register <reg>.
*
* This API is deprecated. Use phy_read on a phy_device found via phy_connect
*
* Returns:
* 0 on success
*/
int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
unsigned short *value)
{
struct mii_dev *bus;
int ret;
bus = miiphy_get_active_dev(devname);
if (!bus)
return 1;
ret = bus->read(bus, addr, MDIO_DEVAD_NONE, reg);
if (ret < 0)
return 1;
*value = (unsigned short)ret;
return 0;
}
/*****************************************************************************
*
* Write <value> to the PHY attached to device <devname>,
* use PHY address <addr> and register <reg>.
*
* This API is deprecated. Use phy_write on a phy_device found by phy_connect
*
* Returns:
* 0 on success
*/
int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
unsigned short value)
{
struct mii_dev *bus;
bus = miiphy_get_active_dev(devname);
if (bus)
return bus->write(bus, addr, MDIO_DEVAD_NONE, reg, value);
return 1;
}
/*****************************************************************************
*
* Print out list of registered MII capable devices.
*/
void miiphy_listdev(void)
{
struct list_head *entry;
struct mii_dev *dev;
puts("MII devices: ");
list_for_each(entry, &mii_devs) {
dev = list_entry(entry, struct mii_dev, link);
printf("'%s' ", dev->name);
}
puts("\n");
if (current_mii)
printf("Current device: '%s'\n", current_mii->name);
}
/*****************************************************************************
*
* Read the OUI, manufacture's model number, and revision number.
*
* OUI: 22 bits (unsigned int)
* Model: 6 bits (unsigned char)
* Revision: 4 bits (unsigned char)
*
* This API is deprecated.
*
* Returns:
* 0 on success
*/
int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
unsigned char *model, unsigned char *rev)
{
unsigned int reg = 0;
unsigned short tmp;
if (miiphy_read(devname, addr, MII_PHYSID2, &tmp) != 0) {
debug("PHY ID register 2 read failed\n");
return -1;
}
reg = tmp;
debug("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
if (reg == 0xFFFF) {
/* No physical device present at this address */
return -1;
}
if (miiphy_read(devname, addr, MII_PHYSID1, &tmp) != 0) {
debug("PHY ID register 1 read failed\n");
return -1;
}
reg |= tmp << 16;
debug("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
*oui = (reg >> 10);
*model = (unsigned char)((reg >> 4) & 0x0000003F);
*rev = (unsigned char)(reg & 0x0000000F);
return 0;
}
#ifndef CONFIG_PHYLIB
/*****************************************************************************
*
* Reset the PHY.
*
* This API is deprecated. Use PHYLIB.
*
* Returns:
* 0 on success
*/
int miiphy_reset(const char *devname, unsigned char addr)
{
unsigned short reg;
int timeout = 500;
if (miiphy_read(devname, addr, MII_BMCR, &reg) != 0) {
debug("PHY status read failed\n");
return -1;
}
if (miiphy_write(devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
debug("PHY reset failed\n");
return -1;
}
#ifdef CONFIG_PHY_RESET_DELAY
udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */
#endif
/*
* Poll the control register for the reset bit to go to 0 (it is
* auto-clearing). This should happen within 0.5 seconds per the
* IEEE spec.
*/
reg = 0x8000;
while (((reg & 0x8000) != 0) && timeout--) {
if (miiphy_read(devname, addr, MII_BMCR, &reg) != 0) {
debug("PHY status read failed\n");
return -1;
}
udelay(1000);
}
if ((reg & 0x8000) == 0) {
return 0;
} else {
puts("PHY reset timed out\n");
return -1;
}
return 0;
}
#endif /* !PHYLIB */
/*****************************************************************************
*
* Determine the ethernet speed (10/100/1000). Return 10 on error.
*/
int miiphy_speed(const char *devname, unsigned char addr)
{
u16 bmcr, anlpar, adv;
#if defined(CONFIG_PHY_GIGE)
u16 btsr;
/*
* Check for 1000BASE-X. If it is supported, then assume that the speed
* is 1000.
*/
if (miiphy_is_1000base_x(devname, addr))
return _1000BASET;
/*
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
*/
/* Check for 1000BASE-T. */
if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
printf("PHY 1000BT status");
goto miiphy_read_failed;
}
if (btsr != 0xFFFF &&
(btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)))
return _1000BASET;
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
printf("PHY speed");
goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
if (bmcr & BMCR_ANENABLE) {
/* Get auto-negotiation results. */
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
printf("PHY AN speed");
goto miiphy_read_failed;
}
if (miiphy_read(devname, addr, MII_ADVERTISE, &adv)) {
puts("PHY AN adv speed");
goto miiphy_read_failed;
}
return ((anlpar & adv) & LPA_100) ? _100BASET : _10BASET;
}
/* Get speed from basic control settings. */
return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
miiphy_read_failed:
printf(" read failed, assuming 10BASE-T\n");
return _10BASET;
}
/*****************************************************************************
*
* Determine full/half duplex. Return half on error.
*/
int miiphy_duplex(const char *devname, unsigned char addr)
{
u16 bmcr, anlpar, adv;
#if defined(CONFIG_PHY_GIGE)
u16 btsr;
/* Check for 1000BASE-X. */
if (miiphy_is_1000base_x(devname, addr)) {
/* 1000BASE-X */
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
printf("1000BASE-X PHY AN duplex");
goto miiphy_read_failed;
}
}
/*
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
*/
/* Check for 1000BASE-T. */
if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
printf("PHY 1000BT status");
goto miiphy_read_failed;
}
if (btsr != 0xFFFF) {
if (btsr & PHY_1000BTSR_1000FD) {
return FULL;
} else if (btsr & PHY_1000BTSR_1000HD) {
return HALF;
}
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
puts("PHY duplex");
goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
if (bmcr & BMCR_ANENABLE) {
/* Get auto-negotiation results. */
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
puts("PHY AN duplex");
goto miiphy_read_failed;
}
if (miiphy_read(devname, addr, MII_ADVERTISE, &adv)) {
puts("PHY AN adv duplex");
goto miiphy_read_failed;
}
return ((anlpar & adv) & (LPA_10FULL | LPA_100FULL)) ?
FULL : HALF;
}
/* Get speed from basic control settings. */
return (bmcr & BMCR_FULLDPLX) ? FULL : HALF;
miiphy_read_failed:
printf(" read failed, assuming half duplex\n");
return HALF;
}
/*****************************************************************************
*
* Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
* 1000BASE-T, or on error.
*/
int miiphy_is_1000base_x(const char *devname, unsigned char addr)
{
#if defined(CONFIG_PHY_GIGE)
u16 exsr;
if (miiphy_read(devname, addr, MII_ESTATUS, &exsr)) {
printf("PHY extended status read failed, assuming no "
"1000BASE-X\n");
return 0;
}
return 0 != (exsr & (ESTATUS_1000XF | ESTATUS_1000XH));
#else
return 0;
#endif
}
#ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
/*****************************************************************************
*
* Determine link status
*/
int miiphy_link(const char *devname, unsigned char addr)
{
unsigned short reg;
/* dummy read; needed to latch some phys */
(void)miiphy_read(devname, addr, MII_BMSR, &reg);
if (miiphy_read(devname, addr, MII_BMSR, &reg)) {
puts("MII_BMSR read failed, assuming no link\n");
return 0;
}
/* Determine if a link is active */
if ((reg & BMSR_LSTATUS) != 0) {
return 1;
} else {
return 0;
}
}
#endif