mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 00:49:43 +00:00
84dee301c3
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Tom Rini <trini@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/gpio/Makefile
170 lines
6 KiB
C
170 lines
6 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code.
|
|
* The purpose is that GPIO config found in kernel should work by simply
|
|
* copy-paste it to U-boot. Ported 2010 to U-boot by:
|
|
* Author: Joakim Axelsson <joakim.axelsson AT stericsson.com>
|
|
*
|
|
* License terms: GNU General Public License, version 2
|
|
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
|
|
*
|
|
*
|
|
* Based on arch/arm/mach-pxa/include/mach/mfp.h:
|
|
* Copyright (C) 2007 Marvell International Ltd.
|
|
* eric miao <eric.miao@marvell.com>
|
|
*/
|
|
|
|
#ifndef __DB8500_PINCFG_H
|
|
#define __DB8500_PINCFG_H
|
|
|
|
#include "db8500_gpio.h"
|
|
|
|
/*
|
|
* U-boot info:
|
|
* SLPM (sleep mode) config will be ignored by U-boot but it is still
|
|
* possible to configure it in order to keep cut-n-paste compability
|
|
* with Linux kernel config.
|
|
*
|
|
* pin configurations are represented by 32-bit integers:
|
|
*
|
|
* bit 0.. 8 - Pin Number (512 Pins Maximum)
|
|
* bit 9..10 - Alternate Function Selection
|
|
* bit 11..12 - Pull up/down state
|
|
* bit 13 - Sleep mode behaviour (not used in U-boot)
|
|
* bit 14 - Direction
|
|
* bit 15 - Value (if output)
|
|
* bit 16..18 - SLPM pull up/down state (not used in U-boot)
|
|
* bit 19..20 - SLPM direction (not used in U-boot)
|
|
* bit 21..22 - SLPM Value (if output) (not used in U-boot)
|
|
*
|
|
* to facilitate the definition, the following macros are provided
|
|
*
|
|
* PIN_CFG_DEFAULT - default config (0):
|
|
* pull up/down = disabled
|
|
* sleep mode = input/wakeup
|
|
* direction = input
|
|
* value = low
|
|
* SLPM direction = same as normal
|
|
* SLPM pull = same as normal
|
|
* SLPM value = same as normal
|
|
*
|
|
* PIN_CFG - default config with alternate function
|
|
* PIN_CFG_PULL - default config with alternate function and pull up/down
|
|
*/
|
|
|
|
/* Sleep mode */
|
|
enum db8500_gpio_slpm {
|
|
DB8500_GPIO_SLPM_INPUT,
|
|
DB8500_GPIO_SLPM_WAKEUP_ENABLE = DB8500_GPIO_SLPM_INPUT,
|
|
DB8500_GPIO_SLPM_NOCHANGE,
|
|
DB8500_GPIO_SLPM_WAKEUP_DISABLE = DB8500_GPIO_SLPM_NOCHANGE,
|
|
};
|
|
|
|
#define PIN_NUM_MASK 0x1ff
|
|
#define PIN_NUM(x) ((x) & PIN_NUM_MASK)
|
|
|
|
#define PIN_ALT_SHIFT 9
|
|
#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT)
|
|
#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
|
|
#define PIN_GPIO (DB8500_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
|
|
#define PIN_ALT_A (DB8500_GPIO_ALT_A << PIN_ALT_SHIFT)
|
|
#define PIN_ALT_B (DB8500_GPIO_ALT_B << PIN_ALT_SHIFT)
|
|
#define PIN_ALT_C (DB8500_GPIO_ALT_C << PIN_ALT_SHIFT)
|
|
|
|
#define PIN_PULL_SHIFT 11
|
|
#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT)
|
|
#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
|
|
#define PIN_PULL_NONE (DB8500_GPIO_PULL_NONE << PIN_PULL_SHIFT)
|
|
#define PIN_PULL_UP (DB8500_GPIO_PULL_UP << PIN_PULL_SHIFT)
|
|
#define PIN_PULL_DOWN (DB8500_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
|
|
|
|
#define PIN_SLPM_SHIFT 13
|
|
#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
|
|
#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
|
|
#define PIN_SLPM_MAKE_INPUT (DB8500_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
|
|
#define PIN_SLPM_NOCHANGE (DB8500_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
|
|
/* These two replace the above in DB8500v2+ */
|
|
#define PIN_SLPM_WAKEUP_ENABLE \
|
|
(DB8500_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
|
|
#define PIN_SLPM_WAKEUP_DISABLE \
|
|
(DB8500_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
|
|
|
|
#define PIN_DIR_SHIFT 14
|
|
#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT)
|
|
#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
|
|
#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT)
|
|
#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT)
|
|
|
|
#define PIN_VAL_SHIFT 15
|
|
#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT)
|
|
#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
|
|
#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
|
|
#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
|
|
|
|
#define PIN_SLPM_PULL_SHIFT 16
|
|
#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT)
|
|
#define PIN_SLPM_PULL(x) \
|
|
(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
|
|
#define PIN_SLPM_PULL_NONE \
|
|
((1 + DB8500_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
|
|
#define PIN_SLPM_PULL_UP \
|
|
((1 + DB8500_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
|
|
#define PIN_SLPM_PULL_DOWN \
|
|
((1 + DB8500_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
|
|
|
|
#define PIN_SLPM_DIR_SHIFT 19
|
|
#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT)
|
|
#define PIN_SLPM_DIR(x) \
|
|
(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
|
|
#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT)
|
|
#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT)
|
|
|
|
#define PIN_SLPM_VAL_SHIFT 21
|
|
#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT)
|
|
#define PIN_SLPM_VAL(x) \
|
|
(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
|
|
#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT)
|
|
#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT)
|
|
|
|
/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */
|
|
#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN)
|
|
#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP)
|
|
#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE)
|
|
#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
|
|
#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
|
|
|
|
#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
|
|
#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
|
|
#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
|
|
#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
|
|
#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
|
|
|
|
#define PIN_CFG_DEFAULT (0)
|
|
|
|
#define PIN_CFG(num, alt) \
|
|
(PIN_CFG_DEFAULT |\
|
|
(PIN_NUM(num) | PIN_##alt))
|
|
|
|
#define PIN_CFG_INPUT(num, alt, pull) \
|
|
(PIN_CFG_DEFAULT |\
|
|
(PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
|
|
|
|
#define PIN_CFG_OUTPUT(num, alt, val) \
|
|
(PIN_CFG_DEFAULT |\
|
|
(PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
|
|
|
|
#define PIN_CFG_PULL(num, alt, pull) \
|
|
((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
|
|
(PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
|
|
|
|
/**
|
|
* db8500_gpio_config_pins - configure several pins at once
|
|
* @cfgs: array of pin configurations
|
|
* @num: number of elments in the array
|
|
*
|
|
* Configures several GPIO pins.
|
|
*/
|
|
void db8500_gpio_config_pins(unsigned long *cfgs, size_t num);
|
|
|
|
#endif
|