mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
120 lines
2.9 KiB
C
120 lines
2.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012, Stefano Babic <sbabic@denx.de>
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <linux/types.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#define ESDCTL_DDR2_EMR2 0x04000000
|
|
#define ESDCTL_DDR2_EMR3 0x06000000
|
|
#define ESDCTL_PRECHARGE 0x00000400
|
|
#define ESDCTL_DDR2_EN_DLL 0x02000400
|
|
#define ESDCTL_DDR2_RESET_DLL 0x00000333
|
|
#define ESDCTL_DDR2_MR 0x00000233
|
|
#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780
|
|
|
|
enum {
|
|
SMODE_NORMAL = 0,
|
|
SMODE_PRECHARGE,
|
|
SMODE_AUTO_REFRESH,
|
|
SMODE_LOAD_REG,
|
|
SMODE_MANUAL_REFRESH
|
|
};
|
|
|
|
#define set_mode(x, en, m) (x | (en << 31) | (m << 28))
|
|
|
|
static inline void dram_wait(unsigned int count)
|
|
{
|
|
volatile unsigned int wait = count;
|
|
|
|
while (wait--)
|
|
;
|
|
|
|
}
|
|
|
|
void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config,
|
|
u32 row, u32 col, u32 dsize, u32 refresh)
|
|
{
|
|
struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
|
|
u32 *cfg_reg, *ctl_reg;
|
|
u32 val;
|
|
u32 ctlval;
|
|
|
|
switch (start_address) {
|
|
case CSD0_BASE_ADDR:
|
|
cfg_reg = &esdc->esdcfg0;
|
|
ctl_reg = &esdc->esdctl0;
|
|
break;
|
|
case CSD1_BASE_ADDR:
|
|
cfg_reg = &esdc->esdcfg1;
|
|
ctl_reg = &esdc->esdctl1;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
/* The MX35 supports 11 up to 14 rows */
|
|
if (row < 11 || row > 14 || col < 8 || col > 10)
|
|
return;
|
|
ctlval = (row - 11) << 24 | (col - 8) << 20 | (dsize << 16);
|
|
|
|
/* Initialize MISC register for DDR2 */
|
|
val = ESDC_MISC_RST | ESDC_MISC_MDDR_EN | ESDC_MISC_MDDR_DL_RST |
|
|
ESDC_MISC_DDR_EN | ESDC_MISC_DDR2_EN;
|
|
writel(val, &esdc->esdmisc);
|
|
val &= ~(ESDC_MISC_RST | ESDC_MISC_MDDR_DL_RST);
|
|
writel(val, &esdc->esdmisc);
|
|
|
|
/*
|
|
* according to DDR2 specs, wait a while before
|
|
* the PRECHARGE_ALL command
|
|
*/
|
|
dram_wait(0x20000);
|
|
|
|
/* Load DDR2 config and timing */
|
|
writel(ddr2_config, cfg_reg);
|
|
|
|
/* Precharge ALL */
|
|
writel(set_mode(ctlval, 1, SMODE_PRECHARGE),
|
|
ctl_reg);
|
|
writel(0xda, start_address + ESDCTL_PRECHARGE);
|
|
|
|
/* Load mode */
|
|
writel(set_mode(ctlval, 1, SMODE_LOAD_REG),
|
|
ctl_reg);
|
|
writeb(0xda, start_address + ESDCTL_DDR2_EMR2); /* EMRS2 */
|
|
writeb(0xda, start_address + ESDCTL_DDR2_EMR3); /* EMRS3 */
|
|
writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */
|
|
writeb(0xda, start_address + ESDCTL_DDR2_RESET_DLL); /* Reset DLL */
|
|
|
|
/* Precharge ALL */
|
|
writel(set_mode(ctlval, 1, SMODE_PRECHARGE),
|
|
ctl_reg);
|
|
writel(0xda, start_address + ESDCTL_PRECHARGE);
|
|
|
|
/* Set mode auto refresh : at least two refresh are required */
|
|
writel(set_mode(ctlval, 1, SMODE_AUTO_REFRESH),
|
|
ctl_reg);
|
|
writel(0xda, start_address);
|
|
writel(0xda, start_address);
|
|
|
|
writel(set_mode(ctlval, 1, SMODE_LOAD_REG),
|
|
ctl_reg);
|
|
writeb(0xda, start_address + ESDCTL_DDR2_MR);
|
|
writeb(0xda, start_address + ESDCTL_DDR2_OCD_DEFAULT);
|
|
|
|
/* OCD mode exit */
|
|
writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */
|
|
|
|
/* Set normal mode */
|
|
writel(set_mode(ctlval, 1, SMODE_NORMAL) | refresh,
|
|
ctl_reg);
|
|
|
|
dram_wait(0x20000);
|
|
|
|
/* Do not set delay lines, only for MDDR */
|
|
}
|