Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 23:24:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/smc91111.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

1306 lines
32 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*------------------------------------------------------------------------
. smc91111.c
. This is a driver for SMSC's 91C111 single-chip Ethernet device.
.
. (C) Copyright 2002
. Sysgo Real-Time Solutions, GmbH <www.elinos.com>
. Rolf Offermanns <rof@sysgo.de>
.
. Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
. Developed by Simple Network Magic Corporation (SNMC)
. Copyright (C) 1996 by Erik Stahlman (ES)
.
.
. Information contained in this file was obtained from the LAN91C111
. manual from SMC. To get a copy, if you really want one, you can find
. information under www.smsc.com.
.
.
. "Features" of the SMC chip:
. Integrated PHY/MAC for 10/100BaseT Operation
. Supports internal and external MII
. Integrated 8K packet memory
. EEPROM interface for configuration
.
. Arguments:
. io = for the base address
. irq = for the IRQ
.
. author:
. Erik Stahlman ( erik@vt.edu )
. Daris A Nevil ( dnevil@snmc.com )
.
.
. Hardware multicast code from Peter Cammaert ( pc@denkart.be )
.
. Sources:
. o SMSC LAN91C111 databook (www.smsc.com)
. o smc9194.c by Erik Stahlman
. o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
.
. History:
. 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks.
. 10/17/01 Marco Hasewinkel Modify for DNP/1110
. 07/25/01 Woojung Huh Modify for ADS Bitsy
. 04/25/01 Daris A Nevil Initial public release through SMSC
. 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111
----------------------------------------------------------------------------*/
#include <common.h>
#include <command.h>
#include <config.h>
#include <malloc.h>
#include "smc91111.h"
#include <net.h>
/* Use power-down feature of the chip */
#define POWER_DOWN 0
#define NO_AUTOPROBE
#define SMC_DEBUG 0
#if SMC_DEBUG > 1
static const char version[] =
"smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
#endif
/* Autonegotiation timeout in seconds */
#ifndef CONFIG_SMC_AUTONEG_TIMEOUT
#define CONFIG_SMC_AUTONEG_TIMEOUT 10
#endif
/*------------------------------------------------------------------------
.
. Configuration options, for the experienced user to change.
.
-------------------------------------------------------------------------*/
/*
. Wait time for memory to be free. This probably shouldn't be
. tuned that much, as waiting for this means nothing else happens
. in the system
*/
#define MEMORY_WAIT_TIME 16
#if (SMC_DEBUG > 2 )
#define PRINTK3(args...) printf(args)
#else
#define PRINTK3(args...)
#endif
#if SMC_DEBUG > 1
#define PRINTK2(args...) printf(args)
#else
#define PRINTK2(args...)
#endif
#ifdef SMC_DEBUG
#define PRINTK(args...) printf(args)
#else
#define PRINTK(args...)
#endif
/*------------------------------------------------------------------------
.
. The internal workings of the driver. If you are changing anything
. here with the SMC stuff, you should have the datasheet and know
. what you are doing.
.
-------------------------------------------------------------------------*/
/* Memory sizing constant */
#define LAN91C111_MEMORY_MULTIPLIER (1024*2)
#ifndef CONFIG_SMC91111_BASE
#error "SMC91111 Base address must be passed to initialization funciton"
/* #define CONFIG_SMC91111_BASE 0x20000300 */
#endif
#define SMC_DEV_NAME "SMC91111"
#define SMC_PHY_ADDR 0x0000
#define SMC_ALLOC_MAX_TRY 5
#define SMC_TX_TIMEOUT 30
#define SMC_PHY_CLOCK_DELAY 1000
#define ETH_ZLEN 60
#ifdef CONFIG_SMC_USE_32_BIT
#define USE_32_BIT 1
#else
#undef USE_32_BIT
#endif
#ifdef SHARED_RESOURCES
extern void swap_to(int device_id);
#else
# define swap_to(x)
#endif
#ifndef CONFIG_SMC91111_EXT_PHY
static void smc_phy_configure(struct eth_device *dev);
#endif /* !CONFIG_SMC91111_EXT_PHY */
/*
------------------------------------------------------------
.
. Internal routines
.
------------------------------------------------------------
*/
#ifdef CONFIG_SMC_USE_IOFUNCS
/*
* input and output functions
*
* Implemented due to inx,outx macros accessing the device improperly
* and putting the device into an unkown state.
*
* For instance, on Sharp LPD7A400 SDK, affects were chip memory
* could not be free'd (hence the alloc failures), duplicate packets,
* packets being corrupt (shifted) on the wire, etc. Switching to the
* inx,outx functions fixed this problem.
*/
static inline word SMC_inw(struct eth_device *dev, dword offset)
{
word v;
v = *((volatile word*)(dev->iobase + offset));
barrier(); *(volatile u32*)(0xc0000000);
return v;
}
static inline void SMC_outw(struct eth_device *dev, word value, dword offset)
{
*((volatile word*)(dev->iobase + offset)) = value;
barrier(); *(volatile u32*)(0xc0000000);
}
static inline byte SMC_inb(struct eth_device *dev, dword offset)
{
word _w;
_w = SMC_inw(dev, offset & ~((dword)1));
return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w);
}
static inline void SMC_outb(struct eth_device *dev, byte value, dword offset)
{
word _w;
_w = SMC_inw(dev, offset & ~((dword)1));
if (offset & 1)
*((volatile word*)(dev->iobase + (offset & ~((dword)1)))) =
(value<<8) | (_w & 0x00ff);
else
*((volatile word*)(dev->iobase + offset)) =
value | (_w & 0xff00);
}
static inline void SMC_insw(struct eth_device *dev, dword offset,
volatile uchar* buf, dword len)
{
volatile word *p = (volatile word *)buf;
while (len-- > 0) {
*p++ = SMC_inw(dev, offset);
barrier();
*((volatile u32*)(0xc0000000));
}
}
static inline void SMC_outsw(struct eth_device *dev, dword offset,
uchar* buf, dword len)
{
volatile word *p = (volatile word *)buf;
while (len-- > 0) {
SMC_outw(dev, *p++, offset);
barrier();
*(volatile u32*)(0xc0000000);
}
}
#endif /* CONFIG_SMC_USE_IOFUNCS */
/*
. A rather simple routine to print out a packet for debugging purposes.
*/
#if SMC_DEBUG > 2
static void print_packet( byte *, int );
#endif
#define tx_done(dev) 1
static int poll4int (struct eth_device *dev, byte mask, int timeout)
{
int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
int is_timeout = 0;
word old_bank = SMC_inw (dev, BSR_REG);
PRINTK2 ("Polling...\n");
SMC_SELECT_BANK (dev, 2);
while ((SMC_inw (dev, SMC91111_INT_REG) & mask) == 0) {
if (get_timer (0) >= tmo) {
is_timeout = 1;
break;
}
}
/* restore old bank selection */
SMC_SELECT_BANK (dev, old_bank);
if (is_timeout)
return 1;
else
return 0;
}
/* Only one release command at a time, please */
static inline void smc_wait_mmu_release_complete (struct eth_device *dev)
{
int count = 0;
/* assume bank 2 selected */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
udelay (1); /* Wait until not busy */
if (++count > 200)
break;
}
}
/*
. Function: smc_reset( void )
. Purpose:
. This sets the SMC91111 chip to its normal state, hopefully from whatever
. mess that any other DOS driver has put it in.
.
. Maybe I should reset more registers to defaults in here? SOFTRST should
. do that for me.
.
. Method:
. 1. send a SOFT RESET
. 2. wait for it to finish
. 3. enable autorelease mode
. 4. reset the memory management unit
. 5. clear all interrupts
.
*/
static void smc_reset (struct eth_device *dev)
{
PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME);
/* This resets the registers mostly to defaults, but doesn't
affect EEPROM. That seems unnecessary */
SMC_SELECT_BANK (dev, 0);
SMC_outw (dev, RCR_SOFTRST, RCR_REG);
/* Setup the Configuration Register */
/* This is necessary because the CONFIG_REG is not affected */
/* by a soft reset */
SMC_SELECT_BANK (dev, 1);
#if defined(CONFIG_SMC91111_EXT_PHY)
SMC_outw (dev, CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG);
#else
SMC_outw (dev, CONFIG_DEFAULT, CONFIG_REG);
#endif
/* Release from possible power-down state */
/* Configuration register is not affected by Soft Reset */
SMC_outw (dev, SMC_inw (dev, CONFIG_REG) | CONFIG_EPH_POWER_EN,
CONFIG_REG);
SMC_SELECT_BANK (dev, 0);
/* this should pause enough for the chip to be happy */
udelay (10);
/* Disable transmit and receive functionality */
SMC_outw (dev, RCR_CLEAR, RCR_REG);
SMC_outw (dev, TCR_CLEAR, TCR_REG);
/* set the control register */
SMC_SELECT_BANK (dev, 1);
SMC_outw (dev, CTL_DEFAULT, CTL_REG);
/* Reset the MMU */
SMC_SELECT_BANK (dev, 2);
smc_wait_mmu_release_complete (dev);
SMC_outw (dev, MC_RESET, MMU_CMD_REG);
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY)
udelay (1); /* Wait until not busy */
/* Note: It doesn't seem that waiting for the MMU busy is needed here,
but this is a place where future chipsets _COULD_ break. Be wary
of issuing another MMU command right after this */
/* Disable all interrupts */
SMC_outb (dev, 0, IM_REG);
}
/*
. Function: smc_enable
. Purpose: let the chip talk to the outside work
. Method:
. 1. Enable the transmitter
. 2. Enable the receiver
. 3. Enable interrupts
*/
static void smc_enable(struct eth_device *dev)
{
PRINTK2("%s: smc_enable\n", SMC_DEV_NAME);
SMC_SELECT_BANK( dev, 0 );
/* see the header file for options in TCR/RCR DEFAULT*/
SMC_outw( dev, TCR_DEFAULT, TCR_REG );
SMC_outw( dev, RCR_DEFAULT, RCR_REG );
/* clear MII_DIS */
/* smc_write_phy_register(PHY_CNTL_REG, 0x0000); */
}
/*
. Function: smc_halt
. Purpose: closes down the SMC91xxx chip.
. Method:
. 1. zero the interrupt mask
. 2. clear the enable receive flag
. 3. clear the enable xmit flags
.
. TODO:
. (1) maybe utilize power down mode.
. Why not yet? Because while the chip will go into power down mode,
. the manual says that it will wake up in response to any I/O requests
. in the register space. Empirical results do not show this working.
*/
static void smc_halt(struct eth_device *dev)
{
PRINTK2("%s: smc_halt\n", SMC_DEV_NAME);
/* no more interrupts for me */
SMC_SELECT_BANK( dev, 2 );
SMC_outb( dev, 0, IM_REG );
/* and tell the card to stay away from that nasty outside world */
SMC_SELECT_BANK( dev, 0 );
SMC_outb( dev, RCR_CLEAR, RCR_REG );
SMC_outb( dev, TCR_CLEAR, TCR_REG );
swap_to(FLASH);
}
/*
. Function: smc_send(struct net_device * )
. Purpose:
. This sends the actual packet to the SMC9xxx chip.
.
. Algorithm:
. First, see if a saved_skb is available.
. ( this should NOT be called if there is no 'saved_skb'
. Now, find the packet number that the chip allocated
. Point the data pointers at it in memory
. Set the length word in the chip's memory
. Dump the packet to chip memory
. Check if a last byte is needed ( odd length packet )
. if so, set the control flag right
. Tell the card to send it
. Enable the transmit interrupt, so I know if it failed
. Free the kernel data if I actually sent it.
*/
static int smc_send(struct eth_device *dev, void *packet, int packet_length)
{
byte packet_no;
byte *buf;
int length;
int numPages;
int try = 0;
int time_out;
byte status;
byte saved_pnr;
word saved_ptr;
/* save PTR and PNR registers before manipulation */
SMC_SELECT_BANK (dev, 2);
saved_pnr = SMC_inb( dev, PN_REG );
saved_ptr = SMC_inw( dev, PTR_REG );
PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME);
length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
/* allocate memory
** The MMU wants the number of pages to be the number of 256 bytes
** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
**
** The 91C111 ignores the size bits, but the code is left intact
** for backwards and future compatibility.
**
** Pkt size for allocating is data length +6 (for additional status
** words, length and ctl!)
**
** If odd size then last byte is included in this header.
*/
numPages = ((length & 0xfffe) + 6);
numPages >>= 8; /* Divide by 256 */
if (numPages > 7) {
printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
return 0;
}
/* now, try to allocate the memory */
SMC_SELECT_BANK (dev, 2);
SMC_outw (dev, MC_ALLOC | numPages, MMU_CMD_REG);
/* FIXME: the ALLOC_INT bit never gets set *
* so the following will always give a *
* memory allocation error. *
* same code works in armboot though *
* -ro
*/
again:
try++;
time_out = MEMORY_WAIT_TIME;
do {
status = SMC_inb (dev, SMC91111_INT_REG);
if (status & IM_ALLOC_INT) {
/* acknowledge the interrupt */
SMC_outb (dev, IM_ALLOC_INT, SMC91111_INT_REG);
break;
}
} while (--time_out);
if (!time_out) {
PRINTK2 ("%s: memory allocation, try %d failed ...\n",
SMC_DEV_NAME, try);
if (try < SMC_ALLOC_MAX_TRY)
goto again;
else
return 0;
}
PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
SMC_DEV_NAME, try);
buf = (byte *) packet;
/* If I get here, I _know_ there is a packet slot waiting for me */
packet_no = SMC_inb (dev, AR_REG);
if (packet_no & AR_FAILED) {
/* or isn't there? BAD CHIP! */
printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
return 0;
}
/* we have a packet address, so tell the card to use it */
SMC_outb (dev, packet_no, PN_REG);
/* do not write new ptr value if Write data fifo not empty */
while ( saved_ptr & PTR_NOTEMPTY )
printf ("Write data fifo not empty!\n");
/* point to the beginning of the packet */
SMC_outw (dev, PTR_AUTOINC, PTR_REG);
PRINTK3 ("%s: Trying to xmit packet of length %x\n",
SMC_DEV_NAME, length);
#if SMC_DEBUG > 2
printf ("Transmitting Packet\n");
print_packet (buf, length);
#endif
/* send the packet length ( +6 for status, length and ctl byte )
and the status word ( set to zeros ) */
#ifdef USE_32_BIT
SMC_outl (dev, (length + 6) << 16, SMC91111_DATA_REG);
#else
SMC_outw (dev, 0, SMC91111_DATA_REG);
/* send the packet length ( +6 for status words, length, and ctl */
SMC_outw (dev, (length + 6), SMC91111_DATA_REG);
#endif
/* send the actual data
. I _think_ it's faster to send the longs first, and then
. mop up by sending the last word. It depends heavily
. on alignment, at least on the 486. Maybe it would be
. a good idea to check which is optimal? But that could take
. almost as much time as is saved?
*/
#ifdef USE_32_BIT
SMC_outsl (dev, SMC91111_DATA_REG, buf, length >> 2);
if (length & 0x2)
SMC_outw (dev, *((word *) (buf + (length & 0xFFFFFFFC))),
SMC91111_DATA_REG);
#else
SMC_outsw (dev, SMC91111_DATA_REG, buf, (length) >> 1);
#endif /* USE_32_BIT */
/* Send the last byte, if there is one. */
if ((length & 1) == 0) {
SMC_outw (dev, 0, SMC91111_DATA_REG);
} else {
SMC_outw (dev, buf[length - 1] | 0x2000, SMC91111_DATA_REG);
}
/* and let the chipset deal with it */
SMC_outw (dev, MC_ENQUEUE, MMU_CMD_REG);
/* poll for TX INT */
/* if (poll4int (dev, IM_TX_INT, SMC_TX_TIMEOUT)) { */
/* poll for TX_EMPTY INT - autorelease enabled */
if (poll4int(dev, IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) {
/* sending failed */
PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
/* release packet */
/* no need to release, MMU does that now */
/* wait for MMU getting ready (low) */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
udelay (10);
}
PRINTK2 ("MMU ready\n");
return 0;
} else {
/* ack. int */
SMC_outb (dev, IM_TX_EMPTY_INT, SMC91111_INT_REG);
/* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */
PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME,
length);
/* release packet */
/* no need to release, MMU does that now */
/* wait for MMU getting ready (low) */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
udelay (10);
}
PRINTK2 ("MMU ready\n");
}
/* restore previously saved registers */
SMC_outb( dev, saved_pnr, PN_REG );
SMC_outw( dev, saved_ptr, PTR_REG );
return length;
}
static int smc_write_hwaddr(struct eth_device *dev)
{
int i;
swap_to(ETHERNET);
SMC_SELECT_BANK (dev, 1);
#ifdef USE_32_BIT
for (i = 0; i < 6; i += 2) {
word address;
address = dev->enetaddr[i + 1] << 8;
address |= dev->enetaddr[i];
SMC_outw(dev, address, (ADDR0_REG + i));
}
#else
for (i = 0; i < 6; i++)
SMC_outb(dev, dev->enetaddr[i], (ADDR0_REG + i));
#endif
swap_to(FLASH);
return 0;
}
/*
* Open and Initialize the board
*
* Set up everything, reset the card, etc ..
*
*/
static int smc_init(struct eth_device *dev, bd_t *bd)
{
swap_to(ETHERNET);
PRINTK2 ("%s: smc_init\n", SMC_DEV_NAME);
/* reset the hardware */
smc_reset (dev);
smc_enable (dev);
/* Configure the PHY */
#ifndef CONFIG_SMC91111_EXT_PHY
smc_phy_configure (dev);
#endif
/* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
/* SMC_SELECT_BANK(dev, 0); */
/* SMC_outw(dev, 0, RPC_REG); */
printf(SMC_DEV_NAME ": MAC %pM\n", dev->enetaddr);
return 0;
}
/*-------------------------------------------------------------
.
. smc_rcv - receive a packet from the card
.
. There is ( at least ) a packet waiting to be read from
. chip-memory.
.
. o Read the status
. o If an error, record it
. o otherwise, read in the packet
--------------------------------------------------------------
*/
static int smc_rcv(struct eth_device *dev)
{
int packet_number;
word status;
word packet_length;
int is_error = 0;
#ifdef USE_32_BIT
dword stat_len;
#endif
byte saved_pnr;
word saved_ptr;
SMC_SELECT_BANK(dev, 2);
/* save PTR and PTR registers */
saved_pnr = SMC_inb( dev, PN_REG );
saved_ptr = SMC_inw( dev, PTR_REG );
packet_number = SMC_inw( dev, RXFIFO_REG );
if ( packet_number & RXFIFO_REMPTY ) {
return 0;
}
PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME);
/* start reading from the start of the packet */
SMC_outw( dev, PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );
/* First two words are status and packet_length */
#ifdef USE_32_BIT
stat_len = SMC_inl(dev, SMC91111_DATA_REG);
status = stat_len & 0xffff;
packet_length = stat_len >> 16;
#else
status = SMC_inw( dev, SMC91111_DATA_REG );
packet_length = SMC_inw( dev, SMC91111_DATA_REG );
#endif
packet_length &= 0x07ff; /* mask off top bits */
PRINTK2("RCV: STATUS %4x LENGTH %4x\n", status, packet_length );
if ( !(status & RS_ERRORS ) ){
/* Adjust for having already read the first two words */
packet_length -= 4; /*4; */
/* set odd length for bug in LAN91C111, */
/* which never sets RS_ODDFRAME */
/* TODO ? */
#ifdef USE_32_BIT
PRINTK3(" Reading %d dwords (and %d bytes)\n",
packet_length >> 2, packet_length & 3 );
/* QUESTION: Like in the TX routine, do I want
to send the DWORDs or the bytes first, or some
mixture. A mixture might improve already slow PIO
performance */
SMC_insl(dev, SMC91111_DATA_REG, net_rx_packets[0],
packet_length >> 2);
/* read the left over bytes */
if (packet_length & 3) {
int i;
byte *tail = (byte *)(net_rx_packets[0] +
(packet_length & ~3));
dword leftover = SMC_inl(dev, SMC91111_DATA_REG);
for (i=0; i<(packet_length & 3); i++)
*tail++ = (byte) (leftover >> (8*i)) & 0xff;
}
#else
PRINTK3(" Reading %d words and %d byte(s)\n",
(packet_length >> 1 ), packet_length & 1 );
SMC_insw(dev, SMC91111_DATA_REG , net_rx_packets[0],
packet_length >> 1);
#endif /* USE_32_BIT */
#if SMC_DEBUG > 2
printf("Receiving Packet\n");
print_packet(net_rx_packets[0], packet_length);
#endif
} else {
/* error ... */
/* TODO ? */
is_error = 1;
}
while ( SMC_inw( dev, MMU_CMD_REG ) & MC_BUSY )
udelay(1); /* Wait until not busy */
/* error or good, tell the card to get rid of this packet */
SMC_outw( dev, MC_RELEASE, MMU_CMD_REG );
while ( SMC_inw( dev, MMU_CMD_REG ) & MC_BUSY )
udelay(1); /* Wait until not busy */
/* restore saved registers */
SMC_outb( dev, saved_pnr, PN_REG );
SMC_outw( dev, saved_ptr, PTR_REG );
if (!is_error) {
/* Pass the packet up to the protocol layers. */
net_process_received_packet(net_rx_packets[0], packet_length);
return packet_length;
} else {
return 0;
}
}
#if 0
/*------------------------------------------------------------
. Modify a bit in the LAN91C111 register set
.-------------------------------------------------------------*/
static word smc_modify_regbit(struct eth_device *dev, int bank, int ioaddr, int reg,
unsigned int bit, int val)
{
word regval;
SMC_SELECT_BANK( dev, bank );
regval = SMC_inw( dev, reg );
if (val)
regval |= bit;
else
regval &= ~bit;
SMC_outw( dev, regval, 0 );
return(regval);
}
/*------------------------------------------------------------
. Retrieve a bit in the LAN91C111 register set
.-------------------------------------------------------------*/
static int smc_get_regbit(struct eth_device *dev, int bank, int ioaddr, int reg, unsigned int bit)
{
SMC_SELECT_BANK( dev, bank );
if ( SMC_inw( dev, reg ) & bit)
return(1);
else
return(0);
}
/*------------------------------------------------------------
. Modify a LAN91C111 register (word access only)
.-------------------------------------------------------------*/
static void smc_modify_reg(struct eth_device *dev, int bank, int ioaddr, int reg, word val)
{
SMC_SELECT_BANK( dev, bank );
SMC_outw( dev, val, reg );
}
/*------------------------------------------------------------
. Retrieve a LAN91C111 register (word access only)
.-------------------------------------------------------------*/
static int smc_get_reg(struct eth_device *dev, int bank, int ioaddr, int reg)
{
SMC_SELECT_BANK( dev, bank );
return(SMC_inw( dev, reg ));
}
#endif /* 0 */
/*---PHY CONTROL AND CONFIGURATION----------------------------------------- */
#if (SMC_DEBUG > 2 )
/*------------------------------------------------------------
. Debugging function for viewing MII Management serial bitstream
.-------------------------------------------------------------*/
static void smc_dump_mii_stream (byte * bits, int size)
{
int i;
printf ("BIT#:");
for (i = 0; i < size; ++i) {
printf ("%d", i % 10);
}
printf ("\nMDOE:");
for (i = 0; i < size; ++i) {
if (bits[i] & MII_MDOE)
printf ("1");
else
printf ("0");
}
printf ("\nMDO :");
for (i = 0; i < size; ++i) {
if (bits[i] & MII_MDO)
printf ("1");
else
printf ("0");
}
printf ("\nMDI :");
for (i = 0; i < size; ++i) {
if (bits[i] & MII_MDI)
printf ("1");
else
printf ("0");
}
printf ("\n");
}
#endif
/*------------------------------------------------------------
. Reads a register from the MII Management serial interface
.-------------------------------------------------------------*/
#ifndef CONFIG_SMC91111_EXT_PHY
static word smc_read_phy_register (struct eth_device *dev, byte phyreg)
{
int oldBank;
int i;
byte mask;
word mii_reg;
byte bits[64];
int clk_idx = 0;
int input_idx;
word phydata;
byte phyaddr = SMC_PHY_ADDR;
/* 32 consecutive ones on MDO to establish sync */
for (i = 0; i < 32; ++i)
bits[clk_idx++] = MII_MDOE | MII_MDO;
/* Start code <01> */
bits[clk_idx++] = MII_MDOE;
bits[clk_idx++] = MII_MDOE | MII_MDO;
/* Read command <10> */
bits[clk_idx++] = MII_MDOE | MII_MDO;
bits[clk_idx++] = MII_MDOE;
/* Output the PHY address, msb first */
mask = (byte) 0x10;
for (i = 0; i < 5; ++i) {
if (phyaddr & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
bits[clk_idx++] = MII_MDOE;
/* Shift to next lowest bit */
mask >>= 1;
}
/* Output the phy register number, msb first */
mask = (byte) 0x10;
for (i = 0; i < 5; ++i) {
if (phyreg & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
bits[clk_idx++] = MII_MDOE;
/* Shift to next lowest bit */
mask >>= 1;
}
/* Tristate and turnaround (2 bit times) */
bits[clk_idx++] = 0;
/*bits[clk_idx++] = 0; */
/* Input starts at this bit time */
input_idx = clk_idx;
/* Will input 16 bits */
for (i = 0; i < 16; ++i)
bits[clk_idx++] = 0;
/* Final clock bit */
bits[clk_idx++] = 0;
/* Save the current bank */
oldBank = SMC_inw (dev, BANK_SELECT);
/* Select bank 3 */
SMC_SELECT_BANK (dev, 3);
/* Get the current MII register value */
mii_reg = SMC_inw (dev, MII_REG);
/* Turn off all MII Interface bits */
mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
/* Clock all 64 cycles */
for (i = 0; i < sizeof bits; ++i) {
/* Clock Low - output data */
SMC_outw (dev, mii_reg | bits[i], MII_REG);
udelay (SMC_PHY_CLOCK_DELAY);
/* Clock Hi - input data */
SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG);
udelay (SMC_PHY_CLOCK_DELAY);
bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI;
}
/* Return to idle state */
/* Set clock to low, data to low, and output tristated */
SMC_outw (dev, mii_reg, MII_REG);
udelay (SMC_PHY_CLOCK_DELAY);
/* Restore original bank select */
SMC_SELECT_BANK (dev, oldBank);
/* Recover input data */
phydata = 0;
for (i = 0; i < 16; ++i) {
phydata <<= 1;
if (bits[input_idx++] & MII_MDI)
phydata |= 0x0001;
}
#if (SMC_DEBUG > 2 )
printf ("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
phyaddr, phyreg, phydata);
smc_dump_mii_stream (bits, sizeof bits);
#endif
return (phydata);
}
/*------------------------------------------------------------
. Writes a register to the MII Management serial interface
.-------------------------------------------------------------*/
static void smc_write_phy_register (struct eth_device *dev, byte phyreg,
word phydata)
{
int oldBank;
int i;
word mask;
word mii_reg;
byte bits[65];
int clk_idx = 0;
byte phyaddr = SMC_PHY_ADDR;
/* 32 consecutive ones on MDO to establish sync */
for (i = 0; i < 32; ++i)
bits[clk_idx++] = MII_MDOE | MII_MDO;
/* Start code <01> */
bits[clk_idx++] = MII_MDOE;
bits[clk_idx++] = MII_MDOE | MII_MDO;
/* Write command <01> */
bits[clk_idx++] = MII_MDOE;
bits[clk_idx++] = MII_MDOE | MII_MDO;
/* Output the PHY address, msb first */
mask = (byte) 0x10;
for (i = 0; i < 5; ++i) {
if (phyaddr & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
bits[clk_idx++] = MII_MDOE;
/* Shift to next lowest bit */
mask >>= 1;
}
/* Output the phy register number, msb first */
mask = (byte) 0x10;
for (i = 0; i < 5; ++i) {
if (phyreg & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
bits[clk_idx++] = MII_MDOE;
/* Shift to next lowest bit */
mask >>= 1;
}
/* Tristate and turnaround (2 bit times) */
bits[clk_idx++] = 0;
bits[clk_idx++] = 0;
/* Write out 16 bits of data, msb first */
mask = 0x8000;
for (i = 0; i < 16; ++i) {
if (phydata & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
bits[clk_idx++] = MII_MDOE;
/* Shift to next lowest bit */
mask >>= 1;
}
/* Final clock bit (tristate) */
bits[clk_idx++] = 0;
/* Save the current bank */
oldBank = SMC_inw (dev, BANK_SELECT);
/* Select bank 3 */
SMC_SELECT_BANK (dev, 3);
/* Get the current MII register value */
mii_reg = SMC_inw (dev, MII_REG);
/* Turn off all MII Interface bits */
mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
/* Clock all cycles */
for (i = 0; i < sizeof bits; ++i) {
/* Clock Low - output data */
SMC_outw (dev, mii_reg | bits[i], MII_REG);
udelay (SMC_PHY_CLOCK_DELAY);
/* Clock Hi - input data */
SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG);
udelay (SMC_PHY_CLOCK_DELAY);
bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI;
}
/* Return to idle state */
/* Set clock to low, data to low, and output tristated */
SMC_outw (dev, mii_reg, MII_REG);
udelay (SMC_PHY_CLOCK_DELAY);
/* Restore original bank select */
SMC_SELECT_BANK (dev, oldBank);
#if (SMC_DEBUG > 2 )
printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
phyaddr, phyreg, phydata);
smc_dump_mii_stream (bits, sizeof bits);
#endif
}
#endif /* !CONFIG_SMC91111_EXT_PHY */
/*------------------------------------------------------------
. Configures the specified PHY using Autonegotiation. Calls
. smc_phy_fixed() if the user has requested a certain config.
.-------------------------------------------------------------*/
#ifndef CONFIG_SMC91111_EXT_PHY
static void smc_phy_configure (struct eth_device *dev)
{
int timeout;
word my_phy_caps; /* My PHY capabilities */
word my_ad_caps; /* My Advertised capabilities */
word status = 0; /*;my status = 0 */
PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME);
/* Reset the PHY, setting all other bits to zero */
smc_write_phy_register (dev, PHY_CNTL_REG, PHY_CNTL_RST);
/* Wait for the reset to complete, or time out */
timeout = 6; /* Wait up to 3 seconds */
while (timeout--) {
if (!(smc_read_phy_register (dev, PHY_CNTL_REG)
& PHY_CNTL_RST)) {
/* reset complete */
break;
}
mdelay(500); /* wait 500 millisecs */
}
if (timeout < 1) {
printf ("%s:PHY reset timed out\n", SMC_DEV_NAME);
goto smc_phy_configure_exit;
}
/* Read PHY Register 18, Status Output */
/* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */
/* Enable PHY Interrupts (for register 18) */
/* Interrupts listed here are disabled */
smc_write_phy_register (dev, PHY_MASK_REG, 0xffff);
/* Configure the Receive/Phy Control register */
SMC_SELECT_BANK (dev, 0);
SMC_outw (dev, RPC_DEFAULT, RPC_REG);
/* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */
my_phy_caps = smc_read_phy_register (dev, PHY_STAT_REG);
my_ad_caps = PHY_AD_CSMA; /* I am CSMA capable */
if (my_phy_caps & PHY_STAT_CAP_T4)
my_ad_caps |= PHY_AD_T4;
if (my_phy_caps & PHY_STAT_CAP_TXF)
my_ad_caps |= PHY_AD_TX_FDX;
if (my_phy_caps & PHY_STAT_CAP_TXH)
my_ad_caps |= PHY_AD_TX_HDX;
if (my_phy_caps & PHY_STAT_CAP_TF)
my_ad_caps |= PHY_AD_10_FDX;
if (my_phy_caps & PHY_STAT_CAP_TH)
my_ad_caps |= PHY_AD_10_HDX;
/* Update our Auto-Neg Advertisement Register */
smc_write_phy_register (dev, PHY_AD_REG, my_ad_caps);
/* Read the register back. Without this, it appears that when */
/* auto-negotiation is restarted, sometimes it isn't ready and */
/* the link does not come up. */
smc_read_phy_register(dev, PHY_AD_REG);
PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
/* Restart auto-negotiation process in order to advertise my caps */
smc_write_phy_register (dev, PHY_CNTL_REG,
PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST);
/* Wait for the auto-negotiation to complete. This may take from */
/* 2 to 3 seconds. */
/* Wait for the reset to complete, or time out */
timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2;
while (timeout--) {
status = smc_read_phy_register (dev, PHY_STAT_REG);
if (status & PHY_STAT_ANEG_ACK) {
/* auto-negotiate complete */
break;
}
mdelay(500); /* wait 500 millisecs */
/* Restart auto-negotiation if remote fault */
if (status & PHY_STAT_REM_FLT) {
printf ("%s: PHY remote fault detected\n",
SMC_DEV_NAME);
/* Restart auto-negotiation */
printf ("%s: PHY restarting auto-negotiation\n",
SMC_DEV_NAME);
smc_write_phy_register (dev, PHY_CNTL_REG,
PHY_CNTL_ANEG_EN |
PHY_CNTL_ANEG_RST |
PHY_CNTL_SPEED |
PHY_CNTL_DPLX);
}
}
if (timeout < 1) {
printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME);
}
/* Fail if we detected an auto-negotiate remote fault */
if (status & PHY_STAT_REM_FLT) {
printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME);
}
/* Re-Configure the Receive/Phy Control register */
SMC_outw (dev, RPC_DEFAULT, RPC_REG);
smc_phy_configure_exit: ;
}
#endif /* !CONFIG_SMC91111_EXT_PHY */
#if SMC_DEBUG > 2
static void print_packet( byte * buf, int length )
{
int i;
int remainder;
int lines;
printf("Packet of length %d \n", length );
#if SMC_DEBUG > 3
lines = length / 16;
remainder = length % 16;
for ( i = 0; i < lines ; i ++ ) {
int cur;
for ( cur = 0; cur < 8; cur ++ ) {
byte a, b;
a = *(buf ++ );
b = *(buf ++ );
printf("%02x%02x ", a, b );
}
printf("\n");
}
for ( i = 0; i < remainder/2 ; i++ ) {
byte a, b;
a = *(buf ++ );
b = *(buf ++ );
printf("%02x%02x ", a, b );
}
printf("\n");
#endif
}
#endif
int smc91111_initialize(u8 dev_num, int base_addr)
{
struct smc91111_priv *priv;
struct eth_device *dev;
int i;
priv = malloc(sizeof(*priv));
if (!priv)
return 0;
dev = malloc(sizeof(*dev));
if (!dev) {
free(priv);
return 0;
}
memset(dev, 0, sizeof(*dev));
priv->dev_num = dev_num;
dev->priv = priv;
dev->iobase = base_addr;
swap_to(ETHERNET);
SMC_SELECT_BANK(dev, 1);
for (i = 0; i < 6; ++i)
dev->enetaddr[i] = SMC_inb(dev, (ADDR0_REG + i));
swap_to(FLASH);
dev->init = smc_init;
dev->halt = smc_halt;
dev->send = smc_send;
dev->recv = smc_rcv;
dev->write_hwaddr = smc_write_hwaddr;
sprintf(dev->name, "%s-%hu", SMC_DEV_NAME, dev_num);
eth_register(dev);
return 0;
}
Reference in a new issue View git blame Copy permalink