u-boot/drivers/usb/host
Peng Fan 229dbba9b1 usb:ehci-mx6 add phy mode query function
usb_phy_enable should return status bit, but not phy mode bit, thus
add a new function usb_phy_mode to query the PHY for it's mode and
make usb_phy_enable just return 0 but not 'phy_ctrl & USBPHY_CTRL_OTG_ID'.

Include a new board weak function board_usb_phy_mode. If board code
does not reimplement this function, it just call usb_phy_mode and return
usb_phy_mode's return value. The reason to include such a weak function
is: " SOC OTG core <--connect--> board HOST port, but no pin id for
the board host port, so board can not use usb_phy_mode to return the
phy mode, but define it's own rule."

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>
2014-11-14 20:56:54 +01:00
..
dwc2.c usb: dwc2: Add driver for Synopsis DWC2 USB IP block 2014-10-22 22:01:58 +02:00
dwc2.h usb: dwc2: Add driver for Synopsis DWC2 USB IP block 2014-10-22 22:01:58 +02:00
ehci-armada100.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-atmel.c USB: ehci-atmel: use pcr to enable or disable clock 2014-09-19 00:11:21 +02:00
ehci-exynos.c exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DT 2014-04-30 10:30:57 +02:00
ehci-faraday.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-fsl.c drivers/usb : Define usb control register mask for w1c bits 2014-05-16 16:24:27 -05:00
ehci-hcd.c usb: Make pollable int support available outside of ehci-hcd.c 2014-11-04 06:04:00 +01:00
ehci-marvell.c arm: marvell: Move arch/kirkwood.h to arch/soc.h 2014-10-23 09:59:20 -04:00
ehci-mpc512x.c powerpc/usb:Differentiate USB controller base address 2013-10-24 09:35:09 -07:00
ehci-mx5.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mx6.c usb:ehci-mx6 add phy mode query function 2014-11-14 20:56:54 +01:00
ehci-mxc.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mxs.c usb: ehci: mxs: Add board-specific callbacks 2014-09-29 09:02:16 +02:00
ehci-omap.c usb: ehci-omap: Reset the USB Host OMAP module 2013-12-06 07:02:32 -05:00
ehci-pci.c usb: ehci-pci: Clarify and cleanup the EHCI controller detection 2013-12-18 19:53:19 +01:00
ehci-ppc4xx.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-rmobile.c usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT 2014-11-07 16:32:02 +01:00
ehci-spear.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-sunxi.c sun6i: ehci: Add sun6i ehci support 2014-11-13 14:49:02 +01:00
ehci-tegra.c usb: tegra: ULPI regression on tegra20 2014-10-06 16:12:48 +02:00
ehci-uniphier.c usb: UniPhier: add UniPhier on-chip EHCI host driver support 2014-11-12 00:21:28 +09:00
ehci-vct.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-zynq.c ARM: zynq: ehci: Added USB host driver support 2014-05-14 07:43:35 +02:00
ehci.h usb: ehci: fix Interrupt on Doorbell flag of USBCMD 2014-11-07 16:32:02 +01:00
isp116x-hcd.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
isp116x.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Kconfig usb: UniPhier: add UniPhier on-chip EHCI host driver support 2014-11-12 00:21:28 +09:00
Makefile usb: UniPhier: add UniPhier on-chip EHCI host driver support 2014-11-12 00:21:28 +09:00
ohci-at91.c USB: ohci-at91: use pcr to enable or disable clock 2014-09-19 00:11:20 +02:00
ohci-da8xx.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ohci-ep93xx.c arm: ep9315: Return back Cirrus Logic EDB9315A board support 2014-07-04 23:45:48 +02:00
ohci-hcd.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
ohci-s3c24xx.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
ohci-s3c24xx.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
ohci.h usb: new board-specific USB init interface 2013-10-20 23:42:40 +02:00
r8a66597-hcd.c usb: r8a66597: Fix initilization size of r8a66597 info structure 2014-06-25 22:38:04 +02:00
r8a66597.h usb: r8a66597: Fix argument mistake of inl 2011-08-08 21:40:40 +02:00
sl811-hcd.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
sl811.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
utmi-armada100.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xhci-exynos5.c exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DT 2014-04-30 10:30:57 +02:00
xhci-keystone.c keystone: usb: add support of usb xhci 2014-10-23 11:27:04 -04:00
xhci-mem.c USB: xHCI: Add stack support for xHCI 2013-10-20 23:42:38 +02:00
xhci-omap.c usb: host: xhci: make sure to power up PHY 2014-07-09 22:11:51 +02:00
xhci-ring.c USB: xHCI: Add stack support for xHCI 2013-10-20 23:42:38 +02:00
xhci.c usb: xhci: (likely) fix bracket in if condition 2014-06-25 22:43:16 +02:00
xhci.h driver/usb: include upper/lower_32_bits() from linux/compat.h 2014-07-22 07:44:24 -04:00