mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 14:14:32 +00:00
1a95b1e82c
Radxa dalang carrier boards are used to mount vmarc SoM's of rk3399pro and rk3288 to make complete SBC. Among these combinations, card detection gpio, max-frequency properties are used with rk3399pro SoM but not required for rk3288 SoM based on the hardware schematics. So, let's move these sdmmc specific properties on associate vmarc dtsi to make common use of dalang carrier device tree file. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
338 lines
7.5 KiB
Text
338 lines
7.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
|
|
* Copyright (c) 2019 Vamrs Limited
|
|
* Copyright (c) 2019 Amarula Solutions(India)
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
|
|
|
|
clkin_gmac: external-gmac-clock {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "clkin_gmac";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
vcc12v_dcin: vcc12v-dcin-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc12v_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&emmc_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
|
assigned-clock-parents = <&clkin_gmac>;
|
|
clock_in_out = "input";
|
|
phy-supply = <&vcc_lan>;
|
|
phy-mode = "rgmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 10000 50000>;
|
|
tx_delay = <0x28>;
|
|
rx_delay = <0x11>;
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
i2c-scl-rising-time-ns = <180>;
|
|
i2c-scl-falling-time-ns = <30>;
|
|
status = "okay";
|
|
|
|
rk809: pmic@20 {
|
|
compatible = "rockchip,rk809";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
|
|
vcc1-supply = <&vcc5v0_sys>;
|
|
vcc2-supply = <&vcc5v0_sys>;
|
|
vcc3-supply = <&vcc5v0_sys>;
|
|
vcc4-supply = <&vcc5v0_sys>;
|
|
vcc5-supply = <&vcc_buck5>;
|
|
vcc6-supply = <&vcc_buck5>;
|
|
vcc7-supply = <&vcc5v0_sys>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc5v0_sys>;
|
|
|
|
regulators {
|
|
vdd_log: DCDC_REG1 {
|
|
regulator-name = "vdd_log";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_l: DCDC_REG2 {
|
|
regulator-name = "vdd_cpu_l";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_sys: DCDC_REG4 {
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_buck5: DCDC_REG5 {
|
|
regulator-name = "vcc_buck5";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <2200000>;
|
|
};
|
|
};
|
|
|
|
vcca_0v9: LDO_REG1 {
|
|
regulator-name = "vcca_0v9";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: LDO_REG2 {
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_0v9: LDO_REG3 {
|
|
regulator-name = "vcc_0v9";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vcca_1v8: LDO_REG4 {
|
|
regulator-name = "vcca_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1850000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* As per BSP, but schematic not showing any regulator
|
|
* pin for LD05.
|
|
*/
|
|
vdd1v5_dvp: LDO_REG5 {
|
|
regulator-name = "vdd1v5_dvp";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v5: LDO_REG6 {
|
|
regulator-name = "vcc_1v5";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_3v0: LDO_REG7 {
|
|
regulator-name = "vccio_3v0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG8 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* As per BSP, but schematic not showing any regulator
|
|
* pin for LD09.
|
|
*/
|
|
vcc_sd: LDO_REG9 {
|
|
regulator-name = "vcc_sd";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc5v0_usb2: SWITCH_REG1 {
|
|
regulator-name = "vcc5v0_usb2";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <5000000>;
|
|
};
|
|
};
|
|
|
|
vccio_3v3: vcc_lan: SWITCH_REG2 {
|
|
regulator-name = "vccio_3v3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&io_domains {
|
|
status = "okay";
|
|
bt656-supply = <&vcca_1v8>;
|
|
sdmmc-supply = <&vccio_sd>;
|
|
gpio1830-supply = <&vccio_3v0>;
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
status = "okay";
|
|
pmu1830-supply = <&vcc_1v8>;
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
max-frequency = <150000000>;
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
rockchip,hw-tshut-mode = <1>;
|
|
rockchip,hw-tshut-polarity = <1>;
|
|
};
|
|
|
|
&pinctrl {
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins =
|
|
<1 RK_PC2 0 &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|