u-boot/common/spl/spl_spi.c
Simon Glass ebc4ef61d7 spl: Add a name to the SPL load-image methods
It is useful to name each method so that we can print out this name when
using the method. Currently this happens using a separate function. In
preparation for unifying this, add a name to each method.

The name is only available if we have libcommon support (i.e can use
printf()).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09 08:40:13 -05:00

128 lines
3.1 KiB
C

/*
* Copyright (C) 2011 OMICRON electronics GmbH
*
* based on drivers/mtd/nand/nand_spl_load.c
*
* Copyright (C) 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spi.h>
#include <spi_flash.h>
#include <errno.h>
#include <spl.h>
#ifdef CONFIG_SPL_OS_BOOT
/*
* Load the kernel, check for a valid header we can parse, and if found load
* the kernel and then device tree.
*/
static int spi_load_image_os(struct spl_image_info *spl_image,
struct spi_flash *flash,
struct image_header *header)
{
int err;
/* Read for a header, parse or error out. */
spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
(void *)header);
if (image_get_magic(header) != IH_MAGIC)
return -1;
err = spl_parse_image_header(spl_image, header);
if (err)
return err;
spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
spl_image->size, (void *)spl_image->load_addr);
/* Read device tree. */
spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
CONFIG_SYS_SPI_ARGS_SIZE,
(void *)CONFIG_SYS_SPL_ARGS_ADDR);
return 0;
}
#endif
static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)
{
struct spi_flash *flash = load->dev;
ulong ret;
ret = spi_flash_read(flash, sector, count, buf);
if (!ret)
return count;
else
return 0;
}
/*
* The main entry for SPI booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from SPI into SDRAM and starts it from there.
*/
static int spl_spi_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
int err = 0;
struct spi_flash *flash;
struct image_header *header;
/*
* Load U-Boot image from SPI flash into RAM
*/
flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
CONFIG_SF_DEFAULT_CS,
CONFIG_SF_DEFAULT_SPEED,
CONFIG_SF_DEFAULT_MODE);
if (!flash) {
puts("SPI probe failed.\n");
return -ENODEV;
}
/* use CONFIG_SYS_TEXT_BASE as temporary storage area */
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || spi_load_image_os(spl_image, flash, header))
#endif
{
/* Load u-boot, mkimage header is 64 bytes. */
err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
(void *)header);
if (err)
return err;
if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
image_get_magic(header) == FDT_MAGIC) {
struct spl_load_info load;
debug("Found FIT\n");
load.dev = flash;
load.priv = NULL;
load.filename = NULL;
load.bl_len = 1;
load.read = spl_spi_fit_read;
err = spl_load_simple_fit(spl_image, &load,
CONFIG_SYS_SPI_U_BOOT_OFFS,
header);
} else {
err = spl_parse_image_header(spl_image, header);
if (err)
return err;
err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
spl_image->size,
(void *)spl_image->load_addr);
}
}
return err;
}
/* Use priorty 1 so that boards can override this */
SPL_LOAD_IMAGE_METHOD("SPI", 1, BOOT_DEVICE_SPI, spl_spi_load_image);