u-boot/include/configs/uniphier.h
Patrick Delaunay b4d14bc81a Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig
This converts the following to Kconfig:
CONFIG_ARMV7_PSCI_1_0
CONFIG_ARMV7_PSCI_0_2

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-17 08:51:29 -04:00

216 lines
6.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2012-2015 Panasonic Corporation
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*/
/* U-Boot - Common settings for UniPhier Family */
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
#ifndef CONFIG_SPL_BUILD
#include <config_distro_bootcmd.h>
#ifdef CONFIG_CMD_MMC
#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
#else
#define BOOT_TARGET_DEVICE_MMC(func)
#endif
#ifdef CONFIG_CMD_UBIFS
#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0)
#else
#define BOOT_TARGET_DEVICE_UBIFS(func)
#endif
#ifdef CONFIG_CMD_USB
#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
#else
#define BOOT_TARGET_DEVICE_USB(func)
#endif
#define BOOT_TARGET_DEVICES(func) \
BOOT_TARGET_DEVICE_MMC(func) \
BOOT_TARGET_DEVICE_UBIFS(func) \
BOOT_TARGET_DEVICE_USB(func)
#else
#define BOOTENV
#endif
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_TIMESTAMP
#define CONFIG_SYS_MONITOR_BASE 0
#define CONFIG_SYS_MONITOR_LEN 0x00200000 /* 2MB */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 1
#if !defined(CONFIG_ARM64)
/* Time clock 1MHz */
#define CONFIG_SYS_TIMER_RATE 1000000
#endif
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
/*
* Network Configuration
*/
#define CONFIG_SERVERIP 192.168.11.1
#define CONFIG_IPADDR 192.168.11.10
#define CONFIG_GATEWAYIP 192.168.11.1
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SYS_LOAD_ADDR 0x85000000
#define CONFIG_SYS_BOOTM_LEN (32 << 20)
#if defined(CONFIG_ARM64)
/* ARM Trusted Firmware */
#define BOOT_IMAGES \
"second_image=unph_bl.bin\0" \
"third_image=fip.bin\0"
#else
#define BOOT_IMAGES \
"second_image=u-boot-spl.bin\0" \
"third_image=u-boot.bin\0"
#endif
#define CONFIG_ROOTPATH "/nfs/root/path"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs $bootargs root=/dev/nfs rw " \
"nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
"run __nfsboot"
#ifdef CONFIG_FIT
#define CONFIG_BOOTFILE "fitImage"
#define KERNEL_ADDR_R_OFFSET "0x05100000"
#define LINUXBOOT_ENV_SETTINGS \
"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
"bootm $kernel_addr_r\0" \
"__nfsboot=run tftpboot\0"
#else
#ifdef CONFIG_ARM64
#define CONFIG_BOOTFILE "Image"
#define LINUXBOOT_CMD "booti"
#define KERNEL_ADDR_R_OFFSET "0x02080000"
#else
#define CONFIG_BOOTFILE "zImage"
#define LINUXBOOT_CMD "bootz"
#define KERNEL_ADDR_R_OFFSET "0x00208000"
#endif
#define LINUXBOOT_ENV_SETTINGS \
"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
"tftpboot=tftpboot $kernel_addr_r $bootfile && " \
"tftpboot $fdt_addr_r $fdtfile &&" \
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
"setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
"run boot_common\0" \
"__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
"tftpboot $fdt_addr_r $fdtfile &&" \
"setenv ramdisk_addr_r - &&" \
"run boot_common\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_addr_r_offset=0x05100000\0" \
"kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
"ramdisk_addr_r_offset=0x06000000\0" \
"ramdisk_file=rootfs.cpio.gz\0" \
"netdev=eth0\0" \
"initrd_high=0xffffffffffffffff\0" \
"loadaddr_offset=0x05000000\0" \
"script=boot.scr\0" \
"scriptaddr=0x85000000\0" \
"nor_base=0x42000000\0" \
"emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
"nandboot=run bootcmd_ubifs0\0" \
"norboot=run tftpboot\0" \
"sdboot=sdsetn && run bootcmd_mmc${sd_first_dev}\0" \
"usbboot=run bootcmd_usb0\0" \
"emmcscript=setenv devtype mmc && " \
"mmcsetn && " \
"setenv devnum ${mmc_first_dev} && " \
"run loadscript_fat\0" \
"nandscript=echo Running ${script} from ubi ... && " \
"ubi part UBI && " \
"ubifsmount ubi0:boot && " \
"ubifsload ${loadaddr} ${script} && " \
"source $loadaddr\0" \
"sdscript=setenv devtype mmc && " \
"sdsetn && " \
"setenv devnum ${sd_first_dev} && " \
"run loadscript_fat\0" \
"norscript=echo Running ${script} from tftp ... && " \
"tftpboot ${script} &&" \
"source $loadaddr\0" \
"usbscript=usb start && " \
"setenv devtype usb && " \
"setenv devnum 0 && " \
"run loadscript_fat\0" \
"loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
"load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
"source $loadaddr\0" \
"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
"tftpboot $tmp_addr $second_image && " \
"setexpr tmp_addr $nor_base + 0x70000 && " \
"tftpboot $tmp_addr $third_image\0" \
"emmcupdate=mmcsetn &&" \
"mmc dev $mmc_first_dev &&" \
"mmc partconf $mmc_first_dev 0 1 1 &&" \
"tftpboot $second_image && " \
"mmc write $loadaddr 0 100 && " \
"tftpboot $third_image && " \
"mmc write $loadaddr 100 f00\0" \
"nandupdate=nand erase 0 0x00100000 &&" \
"tftpboot $second_image && " \
"nand write $loadaddr 0 0x00020000 && " \
"tftpboot $third_image && " \
"nand write $loadaddr 0x00020000 0x001e0000\0" \
"sdupdate=sdsetn &&" \
"mmc dev $sd_first_dev &&" \
"tftpboot $second_image && " \
"mmc write $loadaddr 0 100 && " \
"tftpboot $third_image && " \
"mmc write $loadaddr 100 f00\0" \
"usbupdate=usb start &&" \
"tftpboot $second_image && " \
"usb write $loadaddr 0 100 && " \
"tftpboot $third_image && " \
"usb write $loadaddr 100 f00\0" \
BOOT_IMAGES \
LINUXBOOT_ENV_SETTINGS \
BOOTENV
#define CONFIG_SYS_BOOTMAPSZ 0x20000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
/* only for SPL */
#define CONFIG_SPL_STACK (0x00100000)
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
/* subtract sizeof(struct image_header) */
#define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40)
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
#define CONFIG_SPL_PAD_TO 0x20000
#endif /* __CONFIG_UNIPHIER_COMMON_H__ */