u-boot/arch/arm/mach-s5pc1xx/include/mach/sromc.h
Minkyu Kang 225f5eeccd arm: s5pc1xx: move SoC to mach-s5pc1xx
move arm/arm/cpu/armv7/s5pc1xx to arch/arm/mach-s5pc1xx

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-30 17:17:01 +09:00

40 lines
1.4 KiB
C

/*
* (C) Copyright 2010 Samsung Electronics
* Naveen Krishna Ch <ch.naveen@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* Note: This file contains the register description for Memory subsystem
* (SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX.
*
* Only SROMC is defined as of now
*/
#ifndef __ASM_ARCH_SROMC_H_
#define __ASM_ARCH_SROMC_H_
#define SMC_DATA16_WIDTH(x) (1<<((x*4)+0))
#define SMC_BYTE_ADDR_MODE(x) (1<<((x*4)+1)) /* 0-> Half-word base address*/
/* 1-> Byte base address*/
#define SMC_WAIT_ENABLE(x) (1<<((x*4)+2))
#define SMC_BYTE_ENABLE(x) (1<<((x*4)+3))
#define SMC_BC_TACS(x) (x << 28) /* 0clk address set-up */
#define SMC_BC_TCOS(x) (x << 24) /* 4clk chip selection set-up */
#define SMC_BC_TACC(x) (x << 16) /* 14clk access cycle */
#define SMC_BC_TCOH(x) (x << 12) /* 1clk chip selection hold */
#define SMC_BC_TAH(x) (x << 8) /* 4clk address holding time */
#define SMC_BC_TACP(x) (x << 4) /* 6clk page mode access cycle */
#define SMC_BC_PMC(x) (x << 0) /* normal(1data)page mode configuration */
#ifndef __ASSEMBLY__
struct s5p_sromc {
unsigned int bw;
unsigned int bc[6];
};
#endif /* __ASSEMBLY__ */
/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
#endif /* __ASM_ARCH_SMC_H_ */