mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
419 lines
11 KiB
C
419 lines
11 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
|
|
* Keith Outwater, keith_outwater@mvis.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Configuration support for Xilinx Virtex2 devices. Based
|
|
* on spartan2.c (Rich Ireland, rireland@enterasys.com).
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <virtex2.h>
|
|
|
|
#if 0
|
|
#define FPGA_DEBUG
|
|
#endif
|
|
|
|
#ifdef FPGA_DEBUG
|
|
#define PRINTF(fmt,args...) printf (fmt ,##args)
|
|
#else
|
|
#define PRINTF(fmt,args...)
|
|
#endif
|
|
|
|
/*
|
|
* If the SelectMap interface can be overrun by the processor, define
|
|
* CONFIG_SYS_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board configuration
|
|
* file and add board-specific support for checking BUSY status. By default,
|
|
* assume that the SelectMap interface cannot be overrun.
|
|
*/
|
|
#ifndef CONFIG_SYS_FPGA_CHECK_BUSY
|
|
#undef CONFIG_SYS_FPGA_CHECK_BUSY
|
|
#endif
|
|
|
|
#ifndef CONFIG_FPGA_DELAY
|
|
#define CONFIG_FPGA_DELAY()
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
#endif
|
|
|
|
/*
|
|
* Don't allow config cycle to be interrupted
|
|
*/
|
|
#ifndef CONFIG_SYS_FPGA_CHECK_CTRLC
|
|
#undef CONFIG_SYS_FPGA_CHECK_CTRLC
|
|
#endif
|
|
|
|
/*
|
|
* Check for errors during configuration by default
|
|
*/
|
|
#ifndef CONFIG_SYS_FPGA_CHECK_ERROR
|
|
#define CONFIG_SYS_FPGA_CHECK_ERROR
|
|
#endif
|
|
|
|
/*
|
|
* The default timeout in mS for INIT_B to deassert after PROG_B has
|
|
* been deasserted. Per the latest Virtex II Handbook (page 347), the
|
|
* max time from PORG_B deassertion to INIT_B deassertion is 4uS per
|
|
* data frame for the XC2V8000. The XC2V8000 has 2860 data frames
|
|
* which yields 11.44 mS. So let's make it bigger in order to handle
|
|
* an XC2V1000, if anyone can ever get ahold of one.
|
|
*/
|
|
#ifndef CONFIG_SYS_FPGA_WAIT_INIT
|
|
#define CONFIG_SYS_FPGA_WAIT_INIT CONFIG_SYS_HZ/2 /* 500 ms */
|
|
#endif
|
|
|
|
/*
|
|
* The default timeout for waiting for BUSY to deassert during configuration.
|
|
* This is normally not necessary since for most reasonable configuration
|
|
* clock frequencies (i.e. 66 MHz or less), BUSY monitoring is unnecessary.
|
|
*/
|
|
#ifndef CONFIG_SYS_FPGA_WAIT_BUSY
|
|
#define CONFIG_SYS_FPGA_WAIT_BUSY CONFIG_SYS_HZ/200 /* 5 ms*/
|
|
#endif
|
|
|
|
/* Default timeout for waiting for FPGA to enter operational mode after
|
|
* configuration data has been written.
|
|
*/
|
|
#ifndef CONFIG_SYS_FPGA_WAIT_CONFIG
|
|
#define CONFIG_SYS_FPGA_WAIT_CONFIG CONFIG_SYS_HZ/5 /* 200 ms */
|
|
#endif
|
|
|
|
static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize);
|
|
static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
|
|
|
|
static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize);
|
|
static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
|
|
|
|
int Virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL;
|
|
|
|
switch (desc->iface) {
|
|
case slave_serial:
|
|
PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__);
|
|
ret_val = Virtex2_ss_load (desc, buf, bsize);
|
|
break;
|
|
|
|
case slave_selectmap:
|
|
PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__);
|
|
ret_val = Virtex2_ssm_load (desc, buf, bsize);
|
|
break;
|
|
|
|
default:
|
|
printf ("%s: Unsupported interface type, %d\n",
|
|
__FUNCTION__, desc->iface);
|
|
}
|
|
return ret_val;
|
|
}
|
|
|
|
int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL;
|
|
|
|
switch (desc->iface) {
|
|
case slave_serial:
|
|
PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__);
|
|
ret_val = Virtex2_ss_dump (desc, buf, bsize);
|
|
break;
|
|
|
|
case slave_parallel:
|
|
PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__);
|
|
ret_val = Virtex2_ssm_dump (desc, buf, bsize);
|
|
break;
|
|
|
|
default:
|
|
printf ("%s: Unsupported interface type, %d\n",
|
|
__FUNCTION__, desc->iface);
|
|
}
|
|
return ret_val;
|
|
}
|
|
|
|
int Virtex2_info (Xilinx_desc * desc)
|
|
{
|
|
return FPGA_SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Virtex-II Slave SelectMap configuration loader. Configuration via
|
|
* SelectMap is as follows:
|
|
* 1. Set the FPGA's PROG_B line low.
|
|
* 2. Set the FPGA's PROG_B line high. Wait for INIT_B to go high.
|
|
* 3. Write data to the SelectMap port. If INIT_B goes low at any time
|
|
* this process, a configuration error (most likely CRC failure) has
|
|
* ocurred. At this point a status word may be read from the
|
|
* SelectMap interface to determine the source of the problem (You
|
|
* could, for instance, put this in your 'abort' function handler).
|
|
* 4. After all data has been written, test the state of the FPGA
|
|
* INIT_B and DONE lines. If both are high, configuration has
|
|
* succeeded. Congratulations!
|
|
*/
|
|
static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL;
|
|
Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
|
|
|
|
PRINTF ("%s:%d: Start with interface functions @ 0x%p\n",
|
|
__FUNCTION__, __LINE__, fn);
|
|
|
|
if (fn) {
|
|
size_t bytecount = 0;
|
|
unsigned char *data = (unsigned char *) buf;
|
|
int cookie = desc->cookie;
|
|
unsigned long ts;
|
|
|
|
/* Gotta split this one up (so the stack won't blow??) */
|
|
PRINTF ("%s:%d: Function Table:\n"
|
|
" base 0x%p\n"
|
|
" struct 0x%p\n"
|
|
" pre 0x%p\n"
|
|
" prog 0x%p\n"
|
|
" init 0x%p\n"
|
|
" error 0x%p\n",
|
|
__FUNCTION__, __LINE__,
|
|
&fn, fn, fn->pre, fn->pgm, fn->init, fn->err);
|
|
PRINTF (" clock 0x%p\n"
|
|
" cs 0x%p\n"
|
|
" write 0x%p\n"
|
|
" rdata 0x%p\n"
|
|
" wdata 0x%p\n"
|
|
" busy 0x%p\n"
|
|
" abort 0x%p\n"
|
|
" post 0x%p\n\n",
|
|
fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata,
|
|
fn->busy, fn->abort, fn->post);
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
printf ("Initializing FPGA Device %d...\n", cookie);
|
|
#endif
|
|
/*
|
|
* Run the pre configuration function if there is one.
|
|
*/
|
|
if (*fn->pre) {
|
|
(*fn->pre) (cookie);
|
|
}
|
|
|
|
/*
|
|
* Assert the program line. The minimum pulse width for
|
|
* Virtex II devices is 300 nS (Tprogram parameter in datasheet).
|
|
* There is no maximum value for the pulse width. Check to make
|
|
* sure that INIT_B goes low after assertion of PROG_B
|
|
*/
|
|
(*fn->pgm) (true, true, cookie);
|
|
udelay (10);
|
|
ts = get_timer (0);
|
|
do {
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_INIT) {
|
|
printf ("%s:%d: ** Timeout after %d ticks waiting for INIT"
|
|
" to assert.\n", __FUNCTION__, __LINE__,
|
|
CONFIG_SYS_FPGA_WAIT_INIT);
|
|
(*fn->abort) (cookie);
|
|
return FPGA_FAIL;
|
|
}
|
|
} while (!(*fn->init) (cookie));
|
|
|
|
(*fn->pgm) (false, true, cookie);
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (true, true, cookie);
|
|
|
|
/*
|
|
* Start a timer and wait for INIT_B to go high
|
|
*/
|
|
ts = get_timer (0);
|
|
do {
|
|
CONFIG_FPGA_DELAY ();
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_INIT) {
|
|
printf ("%s:%d: ** Timeout after %d ticks waiting for INIT"
|
|
" to deassert.\n", __FUNCTION__, __LINE__,
|
|
CONFIG_SYS_FPGA_WAIT_INIT);
|
|
(*fn->abort) (cookie);
|
|
return FPGA_FAIL;
|
|
}
|
|
} while ((*fn->init) (cookie) && (*fn->busy) (cookie));
|
|
|
|
(*fn->wr) (true, true, cookie);
|
|
(*fn->cs) (true, true, cookie);
|
|
|
|
udelay (10000);
|
|
|
|
/*
|
|
* Load the data byte by byte
|
|
*/
|
|
while (bytecount < bsize) {
|
|
#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
|
|
if (ctrlc ()) {
|
|
(*fn->abort) (cookie);
|
|
return FPGA_FAIL;
|
|
}
|
|
#endif
|
|
|
|
if ((*fn->done) (cookie) == FPGA_SUCCESS) {
|
|
PRINTF ("%s:%d:done went active early, bytecount = %d\n",
|
|
__FUNCTION__, __LINE__, bytecount);
|
|
break;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_FPGA_CHECK_ERROR
|
|
if ((*fn->init) (cookie)) {
|
|
printf ("\n%s:%d: ** Error: INIT asserted during"
|
|
" configuration\n", __FUNCTION__, __LINE__);
|
|
printf ("%d = buffer offset, %d = buffer size\n",
|
|
bytecount, bsize);
|
|
(*fn->abort) (cookie);
|
|
return FPGA_FAIL;
|
|
}
|
|
#endif
|
|
|
|
(*fn->wdata) (data[bytecount++], true, cookie);
|
|
CONFIG_FPGA_DELAY ();
|
|
|
|
/*
|
|
* Cycle the clock pin
|
|
*/
|
|
(*fn->clk) (false, true, cookie);
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (true, true, cookie);
|
|
|
|
#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
|
|
ts = get_timer (0);
|
|
while ((*fn->busy) (cookie)) {
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_BUSY) {
|
|
printf ("%s:%d: ** Timeout after %d ticks waiting for"
|
|
" BUSY to deassert\n",
|
|
__FUNCTION__, __LINE__, CONFIG_SYS_FPGA_WAIT_BUSY);
|
|
(*fn->abort) (cookie);
|
|
return FPGA_FAIL;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
if (bytecount % (bsize / 40) == 0)
|
|
putc ('.');
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Finished writing the data; deassert FPGA CS_B and WRITE_B signals.
|
|
*/
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->cs) (false, true, cookie);
|
|
(*fn->wr) (false, true, cookie);
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
putc ('\n');
|
|
#endif
|
|
|
|
/*
|
|
* Check for successful configuration. FPGA INIT_B and DONE should
|
|
* both be high upon successful configuration.
|
|
*/
|
|
ts = get_timer (0);
|
|
ret_val = FPGA_SUCCESS;
|
|
while (((*fn->done) (cookie) == FPGA_FAIL) || (*fn->init) (cookie)) {
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_CONFIG) {
|
|
printf ("%s:%d: ** Timeout after %d ticks waiting for DONE to"
|
|
"assert and INIT to deassert\n",
|
|
__FUNCTION__, __LINE__, CONFIG_SYS_FPGA_WAIT_CONFIG);
|
|
(*fn->abort) (cookie);
|
|
ret_val = FPGA_FAIL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret_val == FPGA_SUCCESS) {
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
printf ("Initialization of FPGA device %d complete\n", cookie);
|
|
#endif
|
|
/*
|
|
* Run the post configuration function if there is one.
|
|
*/
|
|
if (*fn->post) {
|
|
(*fn->post) (cookie);
|
|
}
|
|
} else {
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
printf ("** Initialization of FPGA device %d FAILED\n",
|
|
cookie);
|
|
#endif
|
|
}
|
|
} else {
|
|
printf ("%s:%d: NULL Interface function table!\n",
|
|
__FUNCTION__, __LINE__);
|
|
}
|
|
return ret_val;
|
|
}
|
|
|
|
/*
|
|
* Read the FPGA configuration data
|
|
*/
|
|
static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL;
|
|
Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
|
|
|
|
if (fn) {
|
|
unsigned char *data = (unsigned char *) buf;
|
|
size_t bytecount = 0;
|
|
int cookie = desc->cookie;
|
|
|
|
printf ("Starting Dump of FPGA Device %d...\n", cookie);
|
|
|
|
(*fn->cs) (true, true, cookie);
|
|
(*fn->clk) (true, true, cookie);
|
|
|
|
while (bytecount < bsize) {
|
|
#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
|
|
if (ctrlc ()) {
|
|
(*fn->abort) (cookie);
|
|
return FPGA_FAIL;
|
|
}
|
|
#endif
|
|
/*
|
|
* Cycle the clock and read the data
|
|
*/
|
|
(*fn->clk) (false, true, cookie);
|
|
(*fn->clk) (true, true, cookie);
|
|
(*fn->rdata) (&(data[bytecount++]), cookie);
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
if (bytecount % (bsize / 40) == 0)
|
|
putc ('.');
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Deassert CS_B and cycle the clock to deselect the device.
|
|
*/
|
|
(*fn->cs) (false, false, cookie);
|
|
(*fn->clk) (false, true, cookie);
|
|
(*fn->clk) (true, true, cookie);
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
putc ('\n');
|
|
#endif
|
|
puts ("Done.\n");
|
|
} else {
|
|
printf ("%s:%d: NULL Interface function table!\n",
|
|
__FUNCTION__, __LINE__);
|
|
}
|
|
return ret_val;
|
|
}
|
|
|
|
static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
printf ("%s: Slave Serial Loading is unsupported\n", __FUNCTION__);
|
|
return FPGA_FAIL;
|
|
}
|
|
|
|
static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
printf ("%s: Slave Serial Dumping is unsupported\n", __FUNCTION__);
|
|
return FPGA_FAIL;
|
|
}
|
|
|
|
/* vim: set ts=4 tw=78: */
|