u-boot

mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-07 21:54:45 +00:00

History

Simon Glass 9a3b4ceb37 common: Move reset_cpu() to the CPU header Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>		2020-01-17 14:02:31 -05:00
..
imx8mm_evk.c	imx: imx8mm-evk: enable ethernet	2019-11-05 10:27:18 +01:00
Kconfig	imx: Add i.MX8MM EVK board support.	2019-10-08 16:36:36 +02:00
lpddr4_timing.c	imx: Add i.MX8MM EVK board support.	2019-10-08 16:36:36 +02:00
MAINTAINERS	imx: Add i.MX8MM EVK board support.	2019-10-08 16:36:36 +02:00
Makefile	imx: Add i.MX8MM EVK board support.	2019-10-08 16:36:36 +02:00
README	tools: imx8m_image: Change source path for DDR firmware to build dir	2020-01-07 10:26:57 +01:00
spl.c	common: Move reset_cpu() to the CPU header	2020-01-17 14:02:31 -05:00

README

U-Boot for the NXP i.MX8MM EVK board

Quick Start
===========
- Build the ARM Trusted firmware binary
- Get ddr fimware
- Build U-Boot
- Boot

Get and Build the ARM Trusted firmware
======================================
Note: builddir is U-Boot build directory (source directory for in-tree builds)
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_4.19.35_1.0.0
$ make PLAT=imx8mm bl31
$ cp build/imx8mm/release/bl31.bin $(builddir)

Get the ddr and hdmi firmware
=============================
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
$ chmod +x firmware-imx-8.0.bin
$ ./firmware-imx-8.0
$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)

Build U-Boot
============
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mm_evk_defconfig
$ export ATF_LOAD_ADDR=0x920000
$ make flash.bin

Burn the flash.bin to MicroSD card offset 33KB
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33

Boot
====
Set Boot switch to SD boot